References
- Bonnett, A. H., 2001, 'Operating Temperature Considerations and Performance Characteristics for IEEE 841 Motors,' IEEE Transactions on Industry Applications, Vol. 37, No. 4, pp. 1120~1131 https://doi.org/10.1109/28.936405
- Imao, S., Itoh, M. and Harada, T., 1996, 'Turbulent Characteristics of the Flow in an Axially Rotating Pipe,' Int. J. of Heat and Fluid Flow, Vol. 17, No. 5, pp. 444~451 https://doi.org/10.1016/0142-727X(96)00057-4
- Inamuro, T., Yamaguchi, A. and Ogino, F., 1997, 'Fluid Flow in a Rotating Cylindrical Container with a Rotating Disk at the Fluid Surface,' Fluid Dynamics Research, Vol. 21, No. 6, pp. 417~430 https://doi.org/10.1016/S0169-5983(97)00020-8
- Sobolik, V., Izrar, B., Lusseyran, F. and Skali, S., 2000, 'Interaction Between the Ekman Layer and the Couette-Taylor Instability,' Int. J. of Heat and Mass Transfer, Vol. 43, No. 24, pp. 4381~4393 https://doi.org/10.1016/S0017-9310(00)00067-3
- Hwang, J. Y. and Yang, K. S., 2004, 'Numerical Study of Taylor-Couette Flow with an Axial Flow,' Computers & Fluids, Vol. 33, No. 1, pp. 97~118 https://doi.org/10.1016/S0045-7930(03)00033-1
- Char, M. I. and Hsu, Y. H., 1998, 'Numerical Prediction of Turbulent Mixed Convection in a Concentric Horizontal Rotating Annulus with Low-Re two-equation Models,' Int. J. of Heat and Mass Transfer, Vol. 41, No. 12, pp. 1633~1643 https://doi.org/10.1016/S0017-9310(97)00304-9
- Yoo, J. S., 1998, 'Mixed Convection of Air Between Two Horizontal Concentric Cylinders with a Cooled Rotating Outer Cylinder,' Int. J. of Heat and Mass Transfer, Vol. 41, No. 2, pp. 293~302 https://doi.org/10.1016/S0017-9310(97)00141-5
- Yuan, Z. X., Saniei, N. and Yan X. T., 2003, 'Turbulent Heat Transfer on the Stationary Disk in a Rotor-stator System,' Int. J. of Heat and Mass Transfer, Vol. 46, No. 12, pp. 2207~2218 https://doi.org/10.1016/S0017-9310(02)00525-2
- Raimundo, A. M., Oliveira, L. A. and Figueiredo, A. R., 2002, 'Numerical Simulation and Experimental Validation of Heat Transfer within Rotating Flows for Three-dimensional Non-axisymmetric, Turbulent Conditions,' Int. J. for Numerical Methods in Fluids, Vol. 40, No. 6, pp. 821~840 https://doi.org/10.1002/fld.384
- Raimundo, A. M., Figueiredo, A. R., and Oliveira, L. A., 2002, 'Heat Transfer Measurements in a Rotor-Stator System with Three-dimensional Nonaxisymmetric Flow Conditions,' Experimental Thermal and Fluid Science, Vol. 27, No. 1, pp. 47~58 https://doi.org/10.1016/S0894-1777(02)00203-0
- Nakahama, T., Suzuki, K., Hashidume, S., Ishibashi F. and Hirata, M., 2006, 'Cooling Airflow in Unidirectional Ventilated Open-type Motor for Electric Vehicles,' IEEE Transaction on Energy Conversion, Vol. 21, No. 3, pp. 645~651 https://doi.org/10.1109/TEC.2006.877364
- Harris, T. A., 2001, Rolling Bearing Analysis, Wiley & Sons, New York, pp. 461~578
Cited by
- The Heat Transfer Analysis of 1.2[kW] BLDC Motor on the Condition of the External Flow vol.26, pp.2, 2012, https://doi.org/10.5207/JIEIE.2012.26.2.027
- Development of Heat Dissipation Measuring System for 1.2-kW BLDC Motor vol.37, pp.11, 2013, https://doi.org/10.3795/KSME-A.2013.37.11.1423
- Thermal Characteristics of 600 W Brushless DC Motor under Axial Loading Condition vol.33, pp.12, 2016, https://doi.org/10.7736/KSPE.2016.33.12.999