전기학회논문지 (The Transactions of The Korean Institute of Electrical Engineers)

  • 제57권10호
  • /
  • Pages.1876-1882
  • /
  • 2008
  • /
  • 1975-8359(pISSN)
  • /
  • 2287-4364(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

전자현미경 영상을 이용한 나노 비주얼 서보잉

Nano Visual Servoing Loop Using SEM Image

  • 발행 : 2008.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Nano manipulator is used to manufacture Carbon NanoTube(CNT) tips. Using nano manipulator, operator attaches a CNT at the apex of Atomic Force Microscope(AFM) tip, which requires a mastery of mechanics and long manufacture time. Nano manipulator is installed inside a Scanning Electron Microscope(SEM) chamber to observe the operation. This paper presents a control scheme for horizontal axes of nano manipulator via processing SEM image. Edges of AFM tip and CNT are first detected, and the position information so obtained is fed to control horizontal axes of nano manipulator. That is, a visual servoing loop is realized to control the axes more precisely in nano scale.

키워드

참고문헌

  1. A. Hall, W. G. Matthews, R. Superfine, M. R .Falvo, and S. Washburn, "Simple and efficient method for carbon nanotube attachment to scanning probes and other substrates", Applied Physics Letter Vol.82, pp. 2506, 2003 https://doi.org/10.1063/1.1567049
  2. T. Arie, H. Nishijima, S. Akita, and Y. Nakayama, "Carbon-nanotube probe equipped magnetic fore microscope", Journal of. Vacuum Science Technology B, Vol. 18, pp. 104-106, 2000 https://doi.org/10.1116/1.591159
  3. C. V. Nguyen, R. M. D. Stevens, J. Barber, J. Han and M. Meyyappan, "Carbon nanotube scanning probe for profiling of deep-ultraviolet and 193 nm photoresist patterns", Applied Physics Letters Vol 81, No 5, pp. 901-903, 2002 https://doi.org/10.1063/1.1496139
  4. 정기영, "탄소 나노튜브 탐침 제작에 관한 연구", 인하대학교 박사학위논문, 2004 .2
  5. Attocube, "User Manual Inertial XYZ Positioner ANPxyz100", 2005
  6. 송원영, "나노튜브 탐침 제작을 위한 주사 현미경용 고정밀 다축 나노조작기의 설계 및 제작에 관한 연구", 인하대학교 박사학위논문, 2005.2
  7. FEI Company, "The Sirion(FE-SEM) Operating Instruction Manual", 2005
  8. J. R. Paker, "Algorithms for Image Processing and Computer Vision", Wiley, 1997
  9. NI Company, "NI Vision Concept Manual", 2005
  10. G. D. Hager, S. Hutchinsion, "A Tutorial on Visual Servo Control", IEEE Transactions on Robotics and Automation, Vol. 12, No. 5, pp. 651-670, 1996 https://doi.org/10.1109/70.538972