Abstract
The flocculation characteristics of polyacrylamide base flocculants were estimated to reduce the moisture content of the dehydrated cakes. The dewaterability for sewage sludge was found to have a marked effect depending on the flocculant type, agitating speed and time, kind of dissolution water, etc. The optimal agitating speed and time were 700 rpm and 3 sec, respectively, in this experimental condition. and the dewaterability was proportion to the agitating speed upto 700rpm. When recycle water as the dissolution water was used, the solution viscosity of all kind of flocculants was decreased. However, the change of its viscosity are not proportioned to the dewaterabilities for each flocculant. Flocculation system of combinations of the first and sencond flocculation using single flocculant was investigated. Effects of the ratio of first and second dosage for dual flocculation on the dewaterability were also investigated. The optimum conditions of dual flocculation system are 75% and 50% as first dosages for low and high viscous flocculant for total dosage of common flocculation, respectively. Based on the results, an overall mechanism of dual flocculation system is proposed and it is envisaged that optimization of flocculation processes in this way can result in considerable savings in cost.
탈수된 케이크의 함수율을 저감하기 위하여 폴리아크릴아마이드계 고분자 응집제의 응집특성을 평가하였다. 하수 슬러지의 탈수효율은 응집제의 종류, 교반 속도 및 시간, 용해수의 농도 등에 관계된 두드러진 영향이 있음을 알게 되었다. 최적 교반 속도 및 시간은 실험조건에서 각각 700 rpm 및 3초이었다. 탈수효율은 700 rpm까지는 비례적으로 증가하였다. 응집제의 용해수로 재이용수를 사용하였을 때, 모든 종류의 용해점도는 감소되었다. 그러나 그 점도 변화는 각 응집제의 탈수효율과 비례하지는 않았다. 1차 및 2차 응집반응의 조합으로 한가지 응집제를 사용한 응집 시스템을 평가하였다. 2단 응집공정의 1차 및 2차 투입량 비율의 탈수효율에 대한 영향 또한 평가하였다. 2단 응집 시스템의 최적 조건은 저 및 고점도 응집제에 각각에 대하여 총투입량 대비 1차 투입량이 75%와 50%이었다. 그 결과를 기초로, 2단 응집의 전체 메커니즘을 제안하였으며, 이러한 방법으로 응집 공정들을 최적화함으로써 비용 절감이 가능함을 예상할 수 있었다.