The Study of Servo-Parameter Tuning Technique for 6-Axes Articulated Robot Manipulator in Consideration of Dynamic Characteristics

동적 특성을 고려한 6축 로봇의 서보 파라미터 튜닝에 관한 연구

  • Published : 2007.10.15

Abstract

This paper presents a new experimental Servo-Parameter tuning technique for a 6-axes articulated robot manipulator, especially considering robot's dynamics. First of all, investigation for proportional gain of velocity control loop by using a Dynamic Signal Analyzer(DSA) is performed. Using the FUNCTION characteristic of DSA based on the Bode plot, the Bode plot of open loop transfer function can be obtained. In turn, the integral gain of a servo controller can be found out by using the integration time constant extracted from the Bode plot of open loop transfer function. In the meanwhile, the positional gain of the servo controller can be obtained by using the Bode plot of the closed loop transfer function. Using the experimental gain tuning technique proposed in this paper, the testing linear motion of DR6-II robot has been shown to be more accurate rather than the motion with a conventional(empirical) gain tuning technique in Doosan Mecatec Co., Ltd., by improving the dynamic response of the robot as well as synchronizing each joint velocity according to the positional command of an end-effector.

Keywords

References

  1. Kuo, B. C., 1991, Automatic control systems, Prentice- Hall, Inc., pp. 747-762
  2. Ogata, K., 1990, Modern Control Engineering, Prectice-Hall, Inc., pp. 448-467
  3. Shinners, S. M., 1992, Modern Control system theory and design, John Wiley & Sons, Inc., pp. 240-248
  4. Haugen, F., 2004, PID control of dynamic systems, Intl specialized book service Inc., pp. 342-349
  5. Lau, C. Y., 1980, 'A digitally tuned notch filter,' Hewlett-Packard Journal, Vol. 31, No. 8, pp. 14-15
  6. Kim, T. H. and Jeong, S. H., 2001, 'A Study on Control Characteristics of Translation System Using PD Control and LQR,' Journal of the Korean Society of Machine Tool Engineers, Vol. 10, No. 5, pp. 78-84
  7. An, J. S., Kim, S. M. and Lee, S. K., 2001, 'Vibration Compensation due to Spindle Unbalance using An Electro Magnetic Exciter,' Korean Society of Precision Engineering, Vol. 21, pp. 505-509