Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Free Vibration Analysis of Rectangular Plate with Multiple Rectangular Cutouts by Independent Coordinate Coupling Method

독립좌표연성법을 이용한 여러 개의 직사각형 구멍을 갖는 직사각형 평판의 자유진동해석

  • Published : 2007.09.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper is concerned with the vibration analysis of a rectangular plate with multiple rectangular holes. Even though there have been many methods developed for the addressed problem, they suffer from computational time. In this paper, we applied the Independent Coordinate Coupling Method(ICCM) to the addressed problem, which was developed to compute natural vibration characteristics of the rectangular plate with a rectangular hole and proven to be computationally effective. The ICCM is based on Rayleigh-Ritz method but utilizes independent coordinates for each hole domain. By matching the deflection conditions for each hole imposed on the expressions, we can easily derive the reduced mass and stiffness matrices. The resulting equation is then used for the calculation of the eigenvalue problem. The numerical results show the efficacy of the Independent Coordinate Coupling Method.

Keywords

References

  1. Monohan, L. J., Nemergut, P. J. and Maddux, G. E., 1970, 'Natural Frequencies and Mode Shapes of Plates with Interior Cut-outs', The Shock and Vibration Bulletin, Vol. 41, pp. 37-49
  2. Paramasivam, P., 1973, 'Free Vibration of Square Plates with Square Opening', Journal of Sound and Vibration, Vol. 30, pp. 173-178 https://doi.org/10.1016/S0022-460X(73)80111-7
  3. Ali, R. and Atwal, S. J., 1980, 'Prediction of Natural Frequencies of Vibration of Rectangular Plates with Rectangular Cutouts', Computers and Structures, Vol. 12, pp. 819-823 https://doi.org/10.1016/0045-7949(80)90019-X
  4. Lam, K. Y., Hung, K. C. and Chow, S. T., 1989, 'Vibration Analysis of Plates with Cut-outs by the Modified Rayleigh-Ritz Method', Applied Acoustics, Vol. 28, pp. 49-60 https://doi.org/10.1016/0003-682X(89)90030-3
  5. Bhat, R. B., 1985, 'Natural Frequencies of Rectangular Plates Using Characteristic Orthogonal Polynomials in Rayleigh-Ritz Method', Journal of Sound and Vibration, Vol. 102, pp. 493-499 https://doi.org/10.1016/S0022-460X(85)80109-7
  6. Sakiyama, T., Huang, M., Matsuda, H. and Morita, C., 2003, 'Free Vibration of Orthotropic Square Plates with a Square Hole', Journal of Sound and Vibration, Vol. 259, No. 1, pp. 63-80 https://doi.org/10.1006/jsvi.2002.5181
  7. Kwak, M. K., and Han, S., 2005, 'Free Vibration Analysis of Rectangular Plate with a Rectangular Cutout by Independent Coordinate Coupling Method', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 15, No. 12, pp. 1398-1407 https://doi.org/10.5050/KSNVN.2005.15.12.1398
  8. Kwak, M. K. and Han, S., 2007 'Free Vibration Analysis of Rectangular Plate with a Hole by means of Independent Coordinate Coupling Method', Journal of Sound and Vibration, Vol. 306, pp. 12-30 https://doi.org/10.1016/j.jsv.2007.05.041
  9. Leissa, A. 1993, Vibration of Plates, Acoustical Society of America
  10. Aksu, G. and Ali, R., 1976, 'Determination of Dynamic Characteristics of Rectangular Plates with Cut-outs Using a Finite Difference Formulation', Journal of Sound and Vibration, Vol. 44, pp. 147-158 https://doi.org/10.1016/0022-460X(76)90713-6
  11. Laura, P. A. A., Romanelli, E. and Rossi, R. E., 1997, 'Transverse Vibrations of Simply-supported Rectangular Plates with Rectangular Cutouts', Journal of Sound and Vibration, Vol. 202, No. 2, pp. 275-283 https://doi.org/10.1006/jsvi.1996.0703
  12. Avalos, D. R. and Laura, P. A. A., 2003, 'Transverse Vibrations of Simply Supported Rectangular Plates with Two Rectangular Cutouts', Journal of Sound and Vibration, Vol. 267, pp. 967-977 https://doi.org/10.1016/S0022-460X(03)00217-7
  13. Lee, Y.-S. and Lee, Y.-B., 1994, 'Free Vibration Analysis of 4 Edges Clamped, Isotropic Square Plates with 2 Collinear Circular Holes', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 4, No. 3, pp. 283-293