DOI QR코드

DOI QR Code

Effect of the additional application of a resin layer on dentin bonding using single-step adhesives

중간층 레진 적용이 단일 접착과정 상아질 접착제의 접착에 미치는 영향

  • Choi, Seung-Mo (Dept. of Conservative Dentistry, Division of Dentistry, Graduate of Kyung Hee University) ;
  • Park, Sang-Hyuk (Dept. of Conservative Dentistry, Division of Dentistry, Graduate of Kyung Hee University) ;
  • Choi, Kyung-Kyu (Dept. of Conservative Dentistry, Division of Dentistry, Graduate of Kyung Hee University) ;
  • Park, Sang-Jin (Dept. of Conservative Dentistry, Division of Dentistry, Graduate of Kyung Hee University)
  • 최승모 (경희대학교 대학원 치의학과 치과보존학교실) ;
  • 박상혁 (경희대학교 대학원 치의학과 치과보존학교실) ;
  • 최경규 (경희대학교 대학원 치의학과 치과보존학교실) ;
  • 박상진 (경희대학교 대학원 치의학과 치과보존학교실)
  • Published : 2007.03.31

Abstract

The purpose of this study was to prove that an intermediate resin layer (IRL) oan increase the bond strength to dentin by reducing the permeability of single-step adhesives. Flat dentin surfaces were created on buccal and lingual side of freshly extracted third molar using a low-speed diamond saw under copious water flow. Approximately 2.0 mm thick axially sectioned dentin slice was abraded with wet #600 SiC paper. Three single-step self-etch adhesives; Adper Prompt L-Pop (3M ESPE, St Paul, MN, USA), One-Up Bond F (Tokuyama Corp, Tokyo, Japan) and Xeno III (Dentsply, Konstanz, Germany) were used in this study. Each adhesive groups were again subdivided into ten groups by; whether IRL was used or not; whether adhesives were cured with light before application or IRL or not; the mode of composite application. The results of this study were as follows; 1. Bond strength of single-step adhesives increased by an additional coating of intermediate resin layer, and this increasement was statistically signigicant when self-cured composite was used (p < 0.001). 2. When using IRL, there were no difference on bond strengths regardless the curing procedure of single-step adhesives. 3. There were no significant difference on bond strengths between usage of AB2 or SM as an IRL. 4. The thickness of Hybrid layer was correlated with the acidity of adhesive used, and the nanoleakage represented by silver deposits and grains was examined within hybrid and adhesive layer in most of single-step adhesives. 5. Neither thickness of hybrid layer nor nanoleakage were related to bond strength.

본 연구는 단일 접착과정 상아질 접착제와 복합레진 사이에는 부적합성이 존재하며, 이를 개선하기 위해 중간 레진층이 필요하다는 가설을 규명하기 위해 시행되었다. 발치된 치아의 협설측 상아질에 3종의 단일 접착과정 상아질 접착제를 도포 후 광중합, 2종의 중간 레진층 적용, 광중합 또는 자가중합형 복합레진의 사용여부에 따라 30개의 실험군으로 분류하였다. 미세전단 결합강도를 측정하고 투과전자현미경 (TEM)을 이용하여 접착계면에서의 미세 누출과 수분의 이동경로를 관찰하여 접착제의 투과성을 평가하여 다음과 같은 결론을 얻었다. 중간 레진층을 적용 시 접착층의 투과도가 감소되었고 복합레진에 대한 단일 접착과정 상아질 접착제의 결합강도가 증가되었다. 따라서 시간 절약 및 간단한 접착과정을 선호하여 단순화된 상아질 접착제를 선택하는 것은 재고되어야 한다.

Keywords

References

  1. Kanca J. Improving bond strength through acid etching of dentin and bonding to wet dentin surfaces. J Am Dent Assoc 123:35-42. 1992 https://doi.org/10.14219/jada.archive.1992.0248
  2. Bertolotti R. total-etch the rational dentin bonding protocol. J Esthet Dent 3: 1-6, 1991 https://doi.org/10.1111/j.1708-8240.1991.tb00796.x
  3. van Meerbeek B, Perdigao J, Lambrechts P, Vanherle G. The clinical performance of adhesives. J Dent 26: 120, 1998
  4. Frey O. Creating a relieable bond. An all-in-one system. Am J Dent 85D-87D, 2000
  5. Swift EJ Jr, Perdigao J, Combe EC, Simpson CH 3rd, Nunes MF. Effects of restorative and adhesive curing methods on dentin bond strengths. Am J Dent 14: 137-40, 2001
  6. Sanares AM, Itthagarun A, King NM, Tay FR, Pashley DH. Adverse surface interactions between one-bottle light-cured adhesives and chemical-cured composites. Dent Mater 17:542-56, 2001 https://doi.org/10.1016/S0109-5641(01)00016-1
  7. Schiltz MY, Suh BI. Effect of pH of single-bottle adhesives on shear bond strength. J Dent Res 80(special issue):50, 2001
  8. Tay FR, Pashley DH, Suh BI, Carvalho RM, Itthagarun A. Single- step adhesives are permeable membranes. J Dent 30:371-82, 2002 https://doi.org/10.1016/S0300-5712(02)00064-7
  9. Tay FR, Pashley DH. Aggressiveness of contemporary self-etching systems. I: Depth of penetration beyond dentin smear layers. Dent Mater 17 :296-308, 2001 https://doi.org/10.1016/S0109-5641(00)00087-7
  10. Pashley DH. Tay FR. Aggressiveness of contemporary self-etching adhesives. Part II: etching effects on unground enamel. Dent Mater 17 :430-44. 2001 https://doi.org/10.1016/S0109-5641(00)00104-4
  11. Tay FR. Pashley DH. Yiu CK. Sanares AM. Wei SH. Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part I. Single-step self-etching adhesive. J Adhes Dent 5:27-40. 2003
  12. Tay FR. Suh BI. Pashley DH. Prati C. Chuang SF, Li F. Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part II. Single-bottle. total-etch adhesive. J Adhes Dent 5: 91-105, 2003
  13. Tay FR, King NM, Suh BI. Pashley DH. Effect of delayed activation of light-cured resin composites on bonding of all-in-one adhesives. J Adhes Dent 3:207-25. 2001
  14. Tay FR. Pashley DH. water-treeing- A potential mechanism for degradation of dentin adhesives. Am J Dent 16 :6-12. 2003
  15. Cheong C. King NM. Pashley DH. Ferrari M, Toledano M. Tay FR. Incompatibility of self-etch adhesives with chemical/dual-cured composites: two-step vs one-step systems. Oper Dent 28:747-55, 2003
  16. Carvalho RM. Pegoraro TA, Tay FR. Pegoraro LF. Silva NR, Pashley DH. Adhesive permeability affects coupling of resin cements that utilise self-etching primers to dentine. J Dent 32: 55-65, 2004 https://doi.org/10.1016/j.jdent.2003.08.003
  17. Tay FR. Moulding KM. Pashley DH. Distribution of nanofillers from a simplified-step adhesive in acid-conditioned dentin. J Adhes Dent 1:103-17. 1999
  18. Tay FR. Pashley DH. Yoshiyama M. Two modes of nanoleakage expression in single-step adhesives. J Dent Res 81:472-476. 2002 https://doi.org/10.1177/154405910208100708
  19. Sano H. Takatsu T. Ciucchi B. Horner JA. Matthews WG. Pashley DH. Nanoleakage: leakage within the hybrid layer. Oper Dent 20:18-25. 1995
  20. Sano H. Yoshiyama M. Ebisu S. Burrow MF. Takatsu T. Ciucchi B. Carvalho R, Pashley DH. Comparative SEM and TEM observations of nanoleakage within the hybrid layer. Oper Dent 20: 160-7, 1995
  21. Suh BI. Current issues in adhesion dentistry: Classification, curing, compatibility and sensitivity. Bisco Inc.(in Press); p26, 2005
  22. Choi KK, Kim SW, Choi HY. Effect of filler addition to bonding agents on the physical properties and the bond strength to bovine teeth. The First International Congress on Adhesive Dentistry IAD, Program and Abstracts), p434, 2002
  23. Reis AF, Arrais CAG, Novaes PD, Carvalho RM, De Goes MF, Giannini M. Ultramorphological analysis of resin-dentin interfaces produced with water-based single-step and two-step adhesives; Nanoleakge expression. Oper Dent; in Press, 2005
  24. Hashimoto M, Ohno H, Kaga M, Endo K, Sano H. Oguchi H. In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. J Dent Res 79: 1385-91, 2000 https://doi.org/10.1177/00220345000790060601
  25. Tanaka J, Ishikawa K, Yatani H. Yamashita A, Suzuki K. Correlation of dentin bond durability with water absorption of bonding layer. Dent Mater J 18(1): 11-8, 1999 https://doi.org/10.4012/dmj.18.11
  26. Yiu CK, King NM, Pashley DH. Suh BI. Carvalho RM, Carrilho MR, Tay FR. Effect of resin hydrophilicity and water storage on resin strength. Biomaterials 25: 5789-96, 2004 https://doi.org/10.1016/j.biomaterials.2004.01.026
  27. Chang YI. Choi KK, Park SJ. Compatibility between two-step self-etching adhesives and composites with different curing mode. JKACD in Press, 2005
  28. Sano H, Yoshikawa T, Pereira PN, Kanemura N, Morigami M, Tagami J, Pashley DH. Long-term durability of dentin bonds made with a self-etching primer, in vivo. J Dent Res 78:906-11, 1999 https://doi.org/10.1177/00220345990780041101
  29. Gohring TN, Schonenberger KA, Lutz F. Potential of restorative systems with simplified adhesives: Quantitative analysis of wear and marginal adaptation in vitro. Am J Dent 16:275-282, 2003

Cited by

  1. Quantitative comparison of permeability in the adhesive interface of four adhesive systems vol.34, pp.1, 2009, https://doi.org/10.5395/JKACD.2009.34.1.051