전기학회논문지 (The Transactions of The Korean Institute of Electrical Engineers)

  • 제56권8호
  • /
  • Pages.1450-1454
  • /
  • 2007
  • /
  • 1975-8359(pISSN)
  • /
  • 2287-4364(eISSN)
대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

용존 산소 측정용 초소형 Clark-type 센서에 대한 연구

A Study on the Microfabricated Clark-type Sensor for Measuring Dissolved Oxygen

  • 박정일 (고려대 공대 대학원 전기공학과) ;
  • 장종현 (고려대 공대 대학원 전기공학과) ;
  • 최명기 (고려대 공대 대학원 전기공학과) ;
  • 이동영 (울산대 의대 아산생명과학연구소) ;
  • 김영미 (울산대 의대 아산생명과학연구소) ;
  • 박정호 (고려대 공대 전기전자전파공학부)
  • 발행 : 2007.08.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a microfabricated Clark-type sensor which exactly can measure dissolved oxygen in the cell containing solution. We designed, fabricated, and characterized a microfabircated Clark-type oxygen sensor for measuring dissolved oxygen. The microfabricated oxygen sensor consists of 3-electrodes on a glass substrate, a FEP (Fluorinated ethylene propylene) oxygen-permeable membrane, and PDMS (Polydimethylsiloxane) reservoir for storing sample solution. Thin-film Ag/AgCl was employed as a reference electrode and its durability was verified by obtaining a stable open circuit potential for 2 hours against a commercial Ag/AgCl electrode and a stable cyclic voltammetry curve. Selectivity, response time, and linearity of the fabricated oxygen sensor were also verified well by cyclic voltammetry and amperometry depending. The fabricated oxygen sensor showed a 90% response time of 40sec and an excellent linearity with a correlation coefficient of 0.994.

키워드

참고문헌

  1. L. C. Clark, 'Electrochemical device for chemical analysis,' US patent 2,913,386, 1956
  2. H. K. Lee, Y. M. Cho, Y. Y. Lee, and Y. K. Pak, 'Mitochondria-based model for fetal origin of adult disease and insulin resistance,' Ann. N. Y. Acad. Sci., vol. 1042, pp. 1 - 18, 2005 https://doi.org/10.1196/annals.1338.001
  3. B. B. Lowell and G. I. Schulman, 'Mitochondrial dysfunction and type 2 diabetes,' Science, vol. 307, pp. 384-387, 2005 https://doi.org/10.1126/science.1104343
  4. H. Suzuki, A. Sugama, and N. Kojima, 'Micromachined Clark oxygen electrode,' Sensors and Actuators B, vol. 10, pp. 91-98, 1993 https://doi.org/10.1016/0925-4005(93)80031-6
  5. W. Glasspool and J. Atkinson, 'A screen-printed amperometric dissolved oxygen sensor utilising an immobilised electrolyte gel and membrane,' Sensros and Actuators B, vol. 48, pp. 308-317, 1998 https://doi.org/10.1016/S0925-4005(98)00063-X
  6. H. Suzuki, T. Hirakawa, S. Sasaki, and I. Karube, 'An integrated module for sensing $pO_2$, $pCO_2$, and pH,' Analytica Chimica Acta, vol. 405, pp. 57-65, 2000 https://doi.org/10.1016/S0003-2670(99)00748-5
  7. M. Wittkampf, G.-C. Chemnitius, K. Cammann, M. Rospert, and W. Mokwa, 'Silicon thin film sensor for measurement of dissolved oxygen,' Sensors and Actuators B, vol. 43, pp. 40-44, 1997 https://doi.org/10.1016/S0925-4005(97)00138-X
  8. C.-C. Wu, T. Yasukawa, H. Shiku, and T. Matsue, 'Fabrication of miniature Clark oxygen sensor integrated with microstructure,' Sensors and Actuators B, vol. 110, pp. 342-349, 2005 https://doi.org/10.1016/j.snb.2005.02.014
  9. W. Wang, H. Suzuki, K. Hayashi, T. Kaneko, and K. Sunagawa, 'Microfabricated needle-type sensors for $pO_2$, $pCO_2$, and pH,' IEEE Sensors Journal, vol. 6, pp. 11-18, 2006 https://doi.org/10.1109/JSEN.2005.853594
  10. S. Kojima, M. oughran, and H. Suzuki, 'Microanalysis system for $pO_2$, $pCO_2$, and pH constructed with stacked modules,' IEEE Sensors Journal, vol. 5, pp. 1120-1126, 2005 https://doi.org/10.1109/JSEN.2005.853596
  11. G. W. McLaughlin, K. Braden, B. Franc, G. T. A. Kovacs, 'Microfabricated solid-state dissolved oxygen sensor,' Sensors and Actuators B, vol. 83, pp. 138-148, 2002 https://doi.org/10.1016/S0925-4005(02)00021-7
  12. T.-J. Kim, T.-H. Jurng, D.-H. Chung, and S.-I Hong, 'Simultaneous determination of oxygen transport characteristics of six membranes by hexagonal dissolved oxygen sensor systems,' Sensors and Actuators B, vol. 72, pp. 11-20, 2001 https://doi.org/10.1016/S0925-4005(00)00628-6
  13. H. Suzuki, H. Ozawa, S. Sasaki, and I. Karube, 'A novel thin -film Ag/AgCI anode structure for microfabricated Clark-type oxygen electrode,' Sensors and Actuators B, vol. 53, pp. 140-146, 1998 https://doi.org/10.1016/S0925-4005(99)00009-X
  14. H. Suzuki, A. Hiratsuka, S. Sasaki, and I. Karube, 'Problems associated with the thin-film Ag/AgCl reference electrode and a novel structure with improved durability,' Sensors and Actuators B, vol. 46, pp. 104-113, 1998 https://doi.org/10.1016/S0925-4005(98)00043-4
  15. X. Sun and M. Wang, 'Fabrication and characterization of planar reference electrode for on-chip electroanalysis,' Electrochimica Acta, vol. 52, pp. 427-433, 2006 https://doi.org/10.1016/j.electacta.2006.05.050
  16. J.-H. Lee and T.-J. Kim, 'A study on oxygen permeability of polypropylene membranes and their temperature dependency using medical oxygen sensor,' Korean Journal Biotechnology and Bioengineering, vol. 19, pp. 62-64, 2004
  17. H. Suzuki, T. Hirakawa, I. Watanabe, and Y. Kikuchi, 'Determination of blood $pO_2$ using a micromachined Clark-type oxygen electrode,' Analytica Chimica Acta, vol. 431, pp. 249-259, 2001 https://doi.org/10.1016/S0003-2670(00)01325-8