References
- Zakirov, V., and Sweeting, M., 2001, 'Nitrous Oxide as a Rocket Propellant,' Acta Astronautica Vol. 48, pp. 353-354 https://doi.org/10.1016/S0094-5765(01)00047-9
- Zakirov, V., Richardson, G., and Sweeting, M., 2001, 'An Update on Surrey Nitrous Oxide Catalytic Decomposition Research,' 15th AIAA/USE Conference on Small Satellites, SSC01-XI-2
-
Zakirov, V., Richardson, G. and Sweeting, M., 2001, 'Surrey Research Update on
$N_2O$ Catalytic Decomposition for Space Applications,' 37th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, AIAA 01-34547 - Lide D.R., 1995, CRC Handbook of Chemistry and Physics, 76th Edition, CRC Press, Inc.
-
You, W. J., Kim, S. J., Kim, J. K. and Jang, S. P., 2006, 'Thermal Phenomena of
$N_2O$ Catalyst Bed for Hybrid Rockets Using a Porous Medium Approach,' KSAS, Vol. 06-58, p. 90 https://doi.org/10.5139/JKSAS.2006.34.9.089 - Chiaverini, M. J., 1997, 'Regression Rate and Pyrolysis Behavior of HTPB-based Solid Fuels in a Hybrid Rocket Motor,' A Thesis in Mechanical Engineering, The Pennsylvania State University
- Meadors, C., Elsasser, J. E., Wright, A. B., and Hudson, M. K., 2000, 'Design of an Optical Port in the Combustion Chamber of a Labscale Hybrid Rocket Motor,' 36th AIAA/ASME/SAE/Joint Propulsion Conference and Exhibit 16-19, Huntsville, AL., AIAA 2000-3888
- Rajeshwar, D. S., Alon, G., 2003, 'Analysis and Testing of Similarity and Scale Effects in Hybrid Rocket Motors,' Acta Astronautica, Vol. 52, p. 625 https://doi.org/10.1016/S0094-5765(02)00126-1
- Lund, G. K., Starrett, W. D., and Jensen, K. C., 2001, 'Development and Lab-Scale Testing of a Gas Generator Hybrid Fuel in Support of the Hydrogen Peroxide Hybrid Upper Stage Program,' AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, Salt Lake City, Utah, AIAA 2001-3244
- Gibbon, D., Baker, A. M and Guildford, 2002, 'Development of 50-100 milliNewton Level Thrusters For Low Cost Small Spacecraft,' 38th AIAA/ ASAME/ SAE/ ASEE Joint Propulsion Conference & Exhibit, AIAA 2002-4150
- Kim, S. J., Kim, D., 1999, 'Forced Convection in Microstructure for Electronic Equipment Cooling,' ASME J. Heat Transfer, Vol. 121, p. 640
- Wakao, N. S., Kaguei, and Funazkri, T., 1979, 'Effect of Fluid Dispersion Coefficients on Particle-to-Fluid Heat Transfer Coefficients in Packed Beds,' Chem. Eng. Sci., Vol. 34, pp. 325-336 https://doi.org/10.1016/0009-2509(79)85064-2
- Beavers, G. S., Sparrow, E. M., Rodenz, D. E., 1973, 'Influence of Bed Size on the Flow Characteristics and Porosity of Randomly Pack Bed of Spheres,' Journal of Applied Mechanics, September, pp. 659-660
- Amiri, A. and Vafai, K., Kuzay, T. M., 1995, 'Effect of Boundary Conditions on Non-Darcian Heat Transfer Through Comparisons,' Numerical Heat and Mass Transfer, Part A, 27, pp. 654-655
- Jang, S. P., 2003, 'Experiment and Numerical Study on Heat Transfer Enhancement Using a Micro Heat Sink Subject to an Imping Jet,' A Thesis in Mechanical Engineering, KAIST., pp. 51-52
- Kim, S. J., and Jang, S. P., 2002, 'Effect of Darcy Number, The Prandtl Number, and The Reynolds Number on Local Thermal Equilibrium,' Int. J. Heat Mass Transfer Vol. 45, p. 3888 https://doi.org/10.1016/S0017-9310(02)00109-6
- Jang, S. P., Kim, S. J., and Choi, U. S., 2004, 'Bulk Mean Temperature in Porous Medium Analysis,' Int. J. Heat Mass Transfer Vol. 47, pp. 5603-5604 https://doi.org/10.1016/j.ijheatmasstransfer.2004.07.009