Journal of the Korean Society of Safety (한국안전학회지)

The Korean Society of Safety (한국안전학회)
권호 표지

3-Dimensional Stress Analysis for Creep Life Assessment of Y-Piece Under Inner Pressure

내압을 받는 Y 배관의 크리프 수명 평가를 위한 3차원 응력해석

  • Shin, Kyu-In (Frontier Technology Innovation Center, Chung Ang University) ;
  • Lee, Jin-Sang (Department of Mechanical Engineering, Chung Ang University) ;
  • Yoon, Kee-Bong (Department of Mechanical Engineering, Chung Ang University)
  • 신규인 (중앙대학교 미래신기술연구소) ;
  • 이진상 (중앙대학교 기계공학부) ;
  • 윤기봉 (중앙대학교 기계공학부)
  • Published : 2007.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

To assess a creep life of elevated temperature plant components, inspections and analysis are usually focused on the critical locations. In this study, stress analysis of a weld region in branch part of Y-piece was conducted by using a three-dimensional finite element analysis. The stresses at the inner and outer surface in the weld part were estimated by using elastic and elastic-creep analysis. For the elastic-creep analysis two kinds of elastic-creep analysis was conducted. The one was assumed that base and weld material properties were same and the other was that material properties were different between base and weld metal. The material properties of base and weld metal were used from reference data. The results showed the stress relaxation level and its location. The result stresses are also compared with elastic stresses.

Keywords

References

  1. 신규인, 김윤재, 윤기봉, '참조응력법에 입각한 T-배관 국부 크리프 파단 평가를 위한 응력해석 사례연구', 대한기계학회논문집 A권, 제30권, 제8호, pp. 873-879, 2006 https://doi.org/10.3795/KSME-A.2006.30.8.873
  2. 윤기봉, '고온 증기 파이프의 잔여수명 평가', 대한용접학회지, 제13권, 제2호, pp. 12-24, 1995
  3. 박종서, 이해무, 백운봉, '고온설비 수명평가를 위한 표면복제 절차의 표준화', 대한기계학회논문집A, 제24권, 제9호, pp. 2381-2386, 2000
  4. Colombo, P.P., Garzillo, A., Meriggi, M., Ponzoni, C. and Sampietri, C., 'Creep and Damage Analysis of a Serviced Tee Intersection in a Boiler Header: Comparison between Numerical and Experimental Results', Int. J. Pres. Ves. & Piping, Vol. 66, pp. 243-251, 1996 https://doi.org/10.1016/0308-0161(95)00099-2
  5. 김건영, 송기욱, '보일러 고온부 헤더의 균열수명 평가,' 대한용접학회지, 제13권, 제2호, pp. 25-31, 1995
  6. Park, Y.K., Kim, K.S., Chung, Y.K. and Park, J.J., 'Creep Crack Growth in X20CrMoV 121 Steel and Its Weld Joint', J. of Pressure Vessel Tech., Vol. 123, pp. 191-196, 2001 https://doi.org/10.1115/1.1357159
  7. ABAQUS Version 6.5, Hibbitt, Karlsson & Sorensen Inc., 2005