Journal of Navigation and Port Research (한국항해항만학회지)

Korean Institute of Navigation and Port Research (한국항해항만학회)
권호 표지
DOI QR코드

DOI QR Code

A Design of Adaptive Backstepping Controller for Improving Position Accuracy of Linear Motor-based Container Transportation System with Dynamic Friction

선형전동기기반 컨테이너 이송시스템의 위치정확도 향상을 위한 적응 Backstepping 제어기 설계

  • Seo, Jung-Hyun (Department of Electrical Engineering, Dong-A University) ;
  • Han, Geun-Jo (Division of Mechanical Engineering, Dong-A University) ;
  • Lee, Kwon-Soon (Department of Electrical Engineering, Dong-A University) ;
  • Lee, Jin-Woo (Department of Electrical Engineering, Dong-A University)
  • Published : 2007.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

In general mechanical servo systems, friction deteriorates the performance of controllers by its nonlinear characteristics. Especially, friction phenomenon causes steady-state tracking errors and limit cycles in position and velocity control systems, even though gains of controllers are tuned well in linear system model. Even if sensor is used higher accuracy level, it is difficult to improve tracking performance of the position to the same level with a general control method such as PID type. Therefore, many friction models were proposed and compensation methods have been researched actively. In this paper, we consider that the variation of mover's mass is various by loading and unloading. The normal force variation occurs by it and other parameters. Therefore, the proposed control system is composed of main position controller and a friction compensator. A parameter estimator for a nonlinear friction model is designed by adaptive control law and adaptive backstepping control method.

일반적으로 서보 제어 시스템에서 비선형 동적 특성을 갖는 마찰력은 제어기 성능에 악영향을 미친다. 특히, 선형으로 고려된 시스템에 제어기 이득을 잘 설계한다 하더라도 마찰 현상에 포함된 동적으로 변화하는 dead zone에 의한 정상상태 오차 및 리미트 사이클(limit Cycle) 등을 야기한다. 따라서, 본 논문에서는 비선형 동적 마찰 성분을 효과적으로 보상하고 적응적으로 제어함으로써 차세대 항만 자동화 이송시스템으로 주목받고 있는 LMTT(linear motor-based transfer technology) 시스템의 위치 정밀도를 향상시키는 것을 목적으로 하고 있다. 본 제어대상은 셔틀카(shuttle car)와 컨테이너들의 다양한 중량과, 이로 인해 발생하는 동적 마찰 특성 파라미터들의 변화가 발생하므로 마찰력 내부 파라미터들의 추정이 요구된다. 제안하는 방법은 적응 backstepping 제어 기법으로 시스템이 안정하게 제어될 수 있는 조건으로 내부 파라미터 추정기를 설계하여 비선형 동적 마찰력을 보상하도록 하였다.

Keywords

References

  1. 이진우, 서진호, 이영진, 이권순(2004), "DR-FNNs를 이용한 리니어 모터 기반 컨네이너 이송시스템의 위치 제어," 한국항해항만학회지, 제28권, 제6호, pp. 541-548. https://doi.org/10.5394/KINPR.2004.28.6.541
  2. 이진우, 서진호, 이영진, 이권순(2005), "비선형 마찰력을 갖는 선형 서보계를 위한 질량 추정형 적응 제어기 설계," 대한전기학회논문지, 제54D권, 제7호, pp.428-436.
  3. Armstrong-Helouvry B.(1993), "Stick Slip and Control in Low-speed Motion," Automatic Control, IEEE Transactions on, Vol. 38, No. 10, pp. 1483-1496. https://doi.org/10.1109/9.241562
  4. Armstrong-Helouvry B., Amin B.(1994), "Pill Control In The Presence Of Static Friction: Exact And Describing Function Analysis," American Control Conference, Vol. 1, pp. 597-601.
  5. Brian, A. H., Dupont, P., and Carlos Canudas De Wit(l994), "A Survey of Models, Analysis Tools and Compensation Methods for the Control of Machines with Friction," Automatica, Vol. 30, No. 7, pp. 1083-1138. https://doi.org/10.1016/0005-1098(94)90209-7
  6. Canudas De Wit C., Youssef A., and Nguyen-Phuoc V. (2002), "Almost Globally Stable Nonlinear Speed Observer for a Permanent Magnet Synchronous Motor," Decision and Control, Proceedings of the 41st IEEE Conference on, Vol. 1, pp. 136-141. https://doi.org/10.1109/CDC.2002.1184481
  7. Canudas de Wit C., Olsson H., Astrom K. J., and Lischinsky P.(1995), "A New Model for Control of Systems with Friction," Automatic Control, IEEE Transactions on, Vol. 40, No. 3, pp. 419-425. https://doi.org/10.1109/9.376053
  8. Franke, K. P. (2001), "Boosting Efficiency of Split Marine Container Terminals by Innovative Technology," IEEE Intelligent Transportation Systems Conference Proc. Oakland, USA, August, pp. 774-779.
  9. http://www.noellcranesystems.com/
  10. Liu, C. I., Jula, H., Vukadinovic, K. and Ioannou, P. A. (2000), "Comparing Different Technologies for Containers Movement in Marine Container Terminals," Intelligent Transportation Systems, 2000. Proceedings. 2000 IEEE, pp. 488-493.
  11. Lin, F. J., Wai, R. J., and Hong, C. M.(2002), "Hybrid Supervisory Control Using Recurrent Fuzzy Neural Network for Tracking Periodic Inputs," IEEE Trans. on Neural Networks, Vol. 12, No. 1.
  12. Wai, R. J. and Lin, F. J. (2001), "Adaptive RecurrentNeural-Network Control for Linear Induction Motor," IEEE Trans. on Aerospace and Electronic Systems, Vol. 37, No. 4, pp. 1176-1192. https://doi.org/10.1109/7.976958
  13. Yoshida, K., Takami, H., Kong, X., and Sonoda, A. (2001), "Mass Reduction and Propulsion Control for a Permanent-Magnet Linear Synchronous Motor Vehicle," IEEE Trans. on Industry Applications, Vol. 37, No. 1, pp. 67-72. https://doi.org/10.1109/28.903128