DOI QR코드

DOI QR Code

김치생산용 알타리무 전처리가공시스템 개발 (IV) - 시작기의 자동화와 평가 -

Development of the Altari Radish Pre-Processing System for Kimchi Production (IV) - Automation and Evaluation of the Prototype Machine -

  • Min Y.B. (Department of Bio-Industrial Machinery Engineering, Gyeongsang National Universtiy) ;
  • Kim S.T. (Department of Bio-Industrial Machinery Engineering, Gyeongsang National Universtiy) ;
  • Chung T.S. (Jinju National University) ;
  • Kang D.H. (Department of Bio-Industrial Machinery Engineering, Gyeongsang National Universtiy) ;
  • Moon S.W. (Department of Bio-Industrial Machinery Engineering, Gyeongsang National Universtiy)
  • 발행 : 2006.04.01

초록

An Altari radish pre-processing system, which feasible to process automatically such operations as leaf and root tail cutting and root peeling, for kimchi production was accomplished based on the foregone serial studies. In this study, the performances of the developed prototype machine, considered as a commercializing level, were analyzed and evaluated. The prototype machine attached Tiny PLC automatic control system was performed the sequent function as the rate of successful peeling was more than 98% for the Altari radish less than 70 mm diameter of a radish. The operating efficiency of this was 9 see/each, 128 kg/h, and it means as much as $5{\sim}6$ times that of a woman labor's. The sanitation and taste of the mechanized-processed Altari radish kimchi was almost same as that of the handmade. And they were suitable for manufactory of kimchi as the both short term ripening and storing kimchi. Developed machinery with one peeling device and two peeling devices that compared with hand processing, it was analyzed that the break-even yearly working days were 28 days and 19 days, and the break-even yearly processing amount were 28,700 kg, 32,400 kg, respectively.

키워드

참고문헌

  1. Kim, S. T., Min, Y. B., and Jung, H. S. 2004. Development of a peeling machine for Altari radish (I) -Physical properties of the Altari radish-. Journal of Biosystems Engineering published by KSAM 29(1):29-36. (In Korean) https://doi.org/10.5307/JBE.2004.29.1.029
  2. Min, Y. B., Kim, S. T., Kang, D. H. and Chung, T. S. 2003. Determination of optimum cutter shape for peeling Altari radish. Journal of KSAM 28(5):421-428. (In Korean) https://doi.org/10.5307/JBE.2003.28.5.421
  3. Min, Y. B., Kim, S. T., Kang, D. H., Chung, T. S. and La, W. J. 2004. Development of the Altari radish pre-processing system for kimchi production (I) -Leaf and root tail cutting equipment-. Journal of Biosystems Engineering published by KSAM 29(5):451-456. (In Korean) https://doi.org/10.5307/JBE.2004.29.5.451
  4. Min, Y. B., Kim, S. T. and Kang, D. H. 2005. Development of the Altari radish pre-processing system for kimchi production (II) -Optimum cutter shape for plane peeling-. Journal of Biosystems Engineering published by KSAM 30(3):161-165. (In Korean) https://doi.org/10.5307/JBE.2005.30.3.161
  5. Min, Y. B., Kim, S. T. and Chung, T. S. 2005. Development of the Altari radish pre-processing system for kimchi production (III) -Development of the peeling device-. Journal of Biosystems Engineering published by KSAM 30(3):161-165. (In Korean) https://doi.org/10.5307/JBE.2005.30.3.166