한국의류학회지 (Journal of the Korean Society of Clothing and Textiles)

  • 제30권4호
  • /
  • Pages.607-614
  • /
  • 2006
  • /
  • 1225-1151(pISSN)
  • /
  • 2234-0793(eISSN)
한국의류학회 (The Korean Society of Clothing and Textiles)
권호 표지

제사속도와 열처리에 따른 polylactic acid 섬유의 물성 및 생분해성 변화

Effects of Spinning Speed and Heat Treatment on the Mechanical Property and Biodegradability of Polylactic Acid Fibers

  • 박정희 (서울대학교 생활과학대학 의류학과, 지능형 텍스타일 시스템 연구센터) ;
  • 홍은영 (서울대학교 생활과학대학 의류학과)
  • Park Chung-Hee (Dept. of Clothing & Textiles, Seoul National University, and Intelligent Textile System Research Center) ;
  • Hong Eun-Young (Dept. of Clothing & Textiles, Seoul National University)
  • 발행 : 2006.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This study was carried out to suggest the optimal spinning process condition which provides a proper range of tenacity and biodegradability as textile fibers. The effects of the melt spinning speed and heat treatment on the mechanical property and biodegradability of polylactic acid fiber were investigated. Polylactic acid(PLA) was spun in a high spinning speed of $2000{\sim}4000m/min$. Each specimen was heat-treated at $100^{\circ}C$ during 30min. Mechanical properties such as breaking stress and the degree of crystallinity were evaluated using WAXS. Biodegradability was estimated from the decrease of breaking stress, weight loss, and the degree of crystallinity after soil burial. Experimental results revealed that heat treated specimens showed higher breaking stress than untreated specimens, but the increase was not so high as was expected from the remarkable change of crystallinity by heat treatment. It was concluded that breaking stress was more influenced by spinning speed than heat treatment. In the soil burial test, however biodegradability calculated from weight loss was more influenced by heat treatment than spinning speed.

키워드

참고문헌

  1. 류강은, 김영백. (1998). 고분자의 생분해. 고분자 과학과 기술. 9(6), 464-473
  2. 박영환. (1991). 생분해성 고분자-생분해성에 대한 화학적 구조 및 형태학적 미세구조의 효과-. 한국섬유공학회지, 28(1), 9-17
  3. 박중휘, 남영식. (2002). 옥수수 섬유. 섬유기술과 산업, 6(1/2), 124-135
  4. 유의상, 임승순. (1999). 분리막: 생분해성 고분자의 분해특성에 미치는 형태학적 인자. 한국고분자학회, 10(2), 224
  5. 이찬우, 김홍, 송경헌, 문성일. (2002). PLA-POE-PLA 블록 공중합체 분산액에 의한 생체적합성의 평가. Polymer(Korea). 262(2), 174-178
  6. 지동선, 윤철수. (1999). PLA/PCL 블렌드의 특성 및 상용성에 관한 연구-에스테르 교환반응 및 열적특성-. 한국섬유공학회지, 36(1), 25-33
  7. 한국섬유공학회. (2001). 최신합성섬유. 서울: 형설출판사
  8. AATCC Teclmical Method 30-1993 Antifungal activity, Assessment on textile materials: Mildew and Rot resistance of textile materials
  9. Cicero, J. A.; Dorgan, J. R., Garrett, J., Runt, J., & Lin, J. S. (2002). Effects of molecular architecture on two-step, melt-spun poly(lactic acid) fibers. Journal of Applied Polymer Science, 86, 2839-2846 https://doi.org/10.1002/app.11268
  10. Gonzalez, M. F., Fuseckaite, R. A., & Cuadrado, T. R. (1999). structural changes of polylacticacid(PLA) microspheres under hydrolytic degradation. Journal of Applied Polymer Science, 71, 1223-1230 https://doi.org/10.1002/(SICI)1097-4628(19990222)71:8<1223::AID-APP2>3.0.CO;2-I
  11. Hideto, T. (1995). Properties and morphologies of poly(L-lactide): 1. Annealing condition effects on properties and morphologies of poly(L-lactide). Polymer, 36(14), 2709-27160 https://doi.org/10.1016/0032-3861(95)93647-5
  12. Hideto, T., Yoshito, I., Hyon, S. H., Yoshiharu, K., & Toshio K. (1994). Stereocomplex formation between enantiomeric poly(lactic acid). VIII. Complex fibers spun from mixed solution of poly(D-lactic acid) and poly(L-lactic acid). Journal of Applied Polymer Science, 51, 337-344 https://doi.org/10.1002/app.1994.070510216
  13. Paul, M. A., Delcourt, C., Alexandre, M., & Monteverde, F. (2005). Polylactide/montmorillonite nanocomposites: study of the hydrolytic degradation. Polymer Degradation and Stability, 87, 535-542 https://doi.org/10.1016/j.polymdegradstab.2004.10.011
  14. Park, C. H., Kang, Y..K., & Irn, S. S. (2004). Biodegradability of cellulose fabrics. Journal of Applied Polymer Science, 94(1), 248-253 https://doi.org/10.1002/app.20879
  15. Postema, A. R., Luiten, A. H., Oostra, H., & Pennings, A. J. (1990). High-strength poly(L-lactide) fibers by a dry. spinning/hot-drawing process. II. Influence of the extrusion speed and winding speed on the dry-spinning process. Journal of Applied Polymer Science, 39, 1275-1288 https://doi.org/10.1002/app.1990.070390606
  16. Schmack, G., Jehnichen, D., Vogel, R., Tandler, B., & Beyreuther, R. (2001). Biodegradable fibres spun from poly (lactide) generated by reactive extrusion. Journal of Biotechnology, 86, 151-160 https://doi.org/10.1016/S0168-1656(00)00410-7
  17. Suryanarayana, C., & Grant, N. M. (1998). X-ray diffraction: A practical approach. New York: Plenum Press
  18. Ziabicki, A., & Kawai, H. (1985). High-speed fiber spinning: Science and engineering aspect. New York: Wiley