Journal of the Korean Geosynthetics Society (한국지반신소재학회논문집)
- Volume 5 Issue 4
- /
- Pages.27-33
- /
- 2006
- /
- 2508-2876(pISSN)
- /
- 2287-9528(eISSN)
Evaluation of Friction Properties between Geostrip/Sandpaper Interface
지오스트립/샌드페이퍼 계면에서의 마찰특성 평가
- Lim, Ji-Hye (Department of Textile Engineering, Inha University Graduate School) ;
- Byun, Sung-Won (Technical Textile Center, Korea Institute of Industrial Technology) ;
- Jeon, Han-Yong (Division of Nano-Systems Engineering, Inha University)
- Received : 2006.09.29
- Accepted : 2006.12.04
- Published : 2006.12.30
Abstract
Frictional properties between geostrip and sand paper interface were estimated considering soil particle size also the friction coefficients and angles were determined with normal stress. Three kinds of geostrips of design strength 50, 70, 100 KN/m were used and 5 sandpapers of P100, P220, P320, P400, P600 were used also. Shear strength between geostrip and sand paper interface with design strength showed big difference and this is due to the uniform surface pattern of each geostrip when contact to sandpaper without regard to design strength. Shear strength of geostrip was increased with design strength and geostrips/P100 sandpaper interface showed the biggest value. Finally, all of geostrips showed the decrease phenomena of post-peak strength and this is due to the abrasion of geostrip surface by shear test.
흙 입자의 크기를 고려한 5종류의 샌드페이퍼를 사용하여 지오스트립/샌드페이퍼 계면에서의 마찰특성을 평가하였으며, 전단력에 의한 마찰계수와 마찰각 등을 구하였다. 설계강도가 각각 50, 70, 100KN/m인 3종류의 지오스트립이 사용되었으며, 입자 크기가 각각 P100, 220, 320, 400, 600인 5종류의 샌드페이퍼가 사용되었다. 지오스트립의 설계강도에 따라 전단강도는 큰 차이를 나타내지 않았으며, 이는 전단 시 접촉되는 지오스트립 표면이 강도에 따라 차이가 나지 않고 비슷하기 때문이다. 샌드페이퍼의 입자의 크기가 클수록 더 큰 전단강도 값을 나타내었으며, 지오스트립/P100 계면에서 가장 큰 값을 나타내었다. 끝으로 모든 시료의 경우 post-peak 강도 감소 현상이 나타났으며, 이는 전단 시험에 의한 지오스트립 표면 의 마모에 기인한다.
Keywords
- Frictional properties;
- Geostrip/sand paper interface;
- Soil particle size;
- Normal stress;
- Shear strength;
- Design strength;
- Post-peak strength