한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제23권3호
  • /
  • Pages.61-68
  • /
  • 2006
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

자동차 광 네트워크용 POF 광커넥터 최적 접속 조건 연구

Optimal connection condition study of the plastic optical fiber connector for automobiles

  • 정은주 (부산대학교 나노기술학과 대학원) ;
  • 김창석 (부산대학교 나노기술학과) ;
  • 정명영 (부산대학교 나노기술학과)
  • 발행 : 2006.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper is to investigate the influence of the endface quality on the loss characteristics of a plastic optical fiber(POF) connector and the stability of new designed sleeve for in-car network service. Using the parameters of the surface roughness and applied load, insertion loss of connector is measured. Endface condition for optimizing the connection is presented by the surface roughness satisfying loss criteria and the stress for minimizing the loss, $R_{rms}=8nm$ and 19 MPa, respectively. By vibration test and dynamic loss measurement, we show the stability of the new designed sleeve.

키워드

참고문헌

  1. Andreas, N., Bjorn, W. and Matthias, J., 'Plastic-Optical-Fiber-Based Parallel Optical Interconnects,' IEEE J. Select. Topics Quantum Electron., Vol. 5, No.2, pp. 193 - 200, 1999 https://doi.org/10.1109/2944.778282
  2. Zuyuan, H., Waqar, M., Erin, S., Nasir, A. and Yves ,P., 'Analysis on the Effects of Fiber End Face Scratches on Return Loss Performance of Optical Fiber Connectors,' J. Lightwave Technol., Vol.22, No. 12, pp. 2749 - 2754, 2004 https://doi.org/10.1109/JLT.2004.834485
  3. Ling, Y., Huang, H., Chen, W.K., Xing, Z., Liu, Y.C. and Teo, P.L., 'Polishing of fiber optic connectors,' International Journal of Machine Tools & Manufacture., pp. 659 - 668, 2004
  4. Huang; H., Chen, WK., Yin, L., Xiong, Z., Liu, Y.C. and Teo, P., 'Micro/meso ultra precision grinding of fibre optic connectors,' Precision Eng., pp. 95 - 105, 2004 https://doi.org/10.1016/j.precisioneng.2003.08.001
  5. Mitsuru, K., Shinji, N. and Tadatoshi, T., 'Return Loss Characteristics of Optical Fiber Connectors,' J. Lightwave Technol., Vol. 14, No.2, pp. 1986 1991, 1996 https://doi.org/10.1109/50.536966
  6. Masaru, K., Takashi, Y., Shuichiro, A., Shin'ichi, I., Ryo, N., Shin, S. and Seiko, M., 'Injection Molded Plastic Multifiber Connector Realizing Physical Contact with Fiber Elastictity,' IEEE J. Select. Topics Quantum Electron., Vol. 5, No.5, pp. 1271 - 1277, 1999 https://doi.org/10.1109/2944.806752
  7. Yoshito, S., Shuichi, Y., Masayoshi, O., Hirotsugu, S., Michiyuki, A., Shinichi, I., Shin, S. and Shunichi, T., 'Plastic Split Alignment Sleeves for Single-Mode Fiber Connection of MU-and SC-Type Ferrules,' IEEE Photon. Technol. Lett., Vol. 13, No.3, pp. 218 - 220, 2001 https://doi.org/10.1109/68.914326
  8. Bcckmann, P. and Spizzino, A., 'The scattering of electromagnetic waves form rough surface,' London, Pergmon Press, 1963
  9. Zubia, J., Arrue, J. and Mendioroz, A., 'Theoretical Analysis of the Torsion-Induced Optical Effect in a Plastic Optical Fiber,' Optical Fiber Techno., Vol. 3, No. OF970212, pp. 162-167, 1997 https://doi.org/10.1006/ofte.1997.0212