References
- Chiu, H., Ozaki, H., Sato, E., Suzuki, T., Oho, A. and Ariura, Y., 1993, 'An Analysis Using Offset Curves for Profiles, Manufacturing and Errors of Plane Cams,' JSME International Journal-Part C, Vol. 36, No. 1, pp. 110-118
- Davison, J. K., 1978, 'Calculating Cam Profiles Quickly,' Machine Design, 7 December, pp. 151-155
- Garrett, R. E. and Hall Jr., A. S., 1969, 'Effect of Tolerance and Clearance in Linkage Design,' ASME Journal of Engineering for Industry, Vol. 91B, pp. 198-202
- Giordana, F., Rognoni, V. and Ruggieri, G., 1979, 'On the Influence of Measurement Errors in the Kinematic Analysis of Cams,' Mechanism and Machine Theory, Vol. 14, No. 5, pp. 327-340 https://doi.org/10.1016/0094-114X(79)90019-3
- Grosjean, J., 1991, Kinematics and Dynamics of Mechanisms, McGraw-Hill, New York, pp. 267-285
- Hall Jr., A. S., 1961, Kinematics and Linkage Design, Balt, Indiana, pp. 2-3, 65-67
- Hartenberg, R. S. and Denavit, J., 1964, Kinematic Synthesis of Linkages, MacGraw-Hill, New York, pp. 59-63, pp. 295-306, 315-320
- Kim, H. R. and Newcombe, W. R., 1982, 'The Effect of Cam Profile Errors and System Flexibility on Cam Mechanism Output,' Mechanism and Machine Theory, Vol. 17, No. 1, pp. 57-71 https://doi.org/10.1016/0094-114X(82)90024-6
- Norton, R. L., 1988, 'Effect of Manufacturing Method on Dynamic Performance of Cams-an Experimental Study : Part I-Eccentric Cams and Part II-Double Dwell Cams,' Mechanism and Machine Theory, Vol. 23, No. 3, pp. 191-208 https://doi.org/10.1016/0094-114X(88)90104-8
- Norton, R. L., 2002, Cam Design and Manufacturing Handbook, Industrial, New York, pp.315-334
- Pulkrabek, W. W., 1997, Engineering Fundamentals of the Internal Combustion Engine, Prentice-Hall, New Jersey, p. 16, 24
- Rao, S. S., 1984, 'Error Analysis of Cam-Follower Systems : a Probablistic Approach,' Proceedings of the Institution of Mechanical Engineers-Part C, Journal of Mechanical Engineering Science, Vol. 198, No. 12, pp. 155-162 https://doi.org/10.1243/PIME_PROC_1984_198_103_02
- Rees-Jones, J., 1978, 'Mechanisms, Cam Cutting Co-ordinates,' Engineering, March, pp. 220-224
- Rees-Jones, J., 1978, 'Mechanisms, Cam Curvature and Interference,' Engineering, May, pp. 460-463
- Rothbart, H.A. (Ed.), 2004, Cam Design Handbook, McGraw-Hill, New York, pp. 285-301
- Spotts, M. F., 1985, Design of Machine Elements, 6th Edition, Prentice-Hall, New Jersey p. 611
- Wang, W. H., Tseng, C. H., Tsay, C. B. and Ling, S. F., 1993, 'On the Manufacturing Tolerance of Disk Cam Profile,' Journal of Materials Processing Technology, Vol. 38, No. 1-2, pp. 71-84 https://doi.org/10.1016/0924-0136(93)90187-B
- Wu, L. I., 2003, 'Calculating Conjugate Cam Profiles by Vector Equations,' Proceedings of the Institution of Mechanical Engineers-Part C, Journal of Mechanical Engineering Science, Vol. 217, No. 10, pp. 1117-1123 https://doi.org/10.1243/095440603322517135
- Wu, L. I. and Chang, W. T., 2005, 'Analysis of Mechanical Errors in Disk Cam Mechanisms,' Proceedings of the Institution of Mechanical Engineers-Part C, Journal of Mechanical Engineering Science, Vol. 219, No. 2, pp. 209-224 https://doi.org/10.1243/095440605X8405