Acknowledgement
Grant : 고기능성 플라스틱 경량 windshield 개발
Supported by : 산업자원부
Journal of Adhesion and Interface (접착 및 계면)
- Volume 7 Issue 1
- /
- Pages.10-15
- /
- 2006
- /
- 1229-9243(pISSN)
- /
- 2233-8217(eISSN)
Hard Coatings on Polycarbonate Plate by Sol-Gel Reactions of [3-(methacryloyloxy)propyl]trimethoxysilane
폴리카보네이트 판 위에 [3-(methacryloyloxy)propyl]trimethoxysilane의 졸-겔 반응을 이용한 하드 코팅
- Ji, Young Jon (Department of Chemistry, Chungbuk National University) ;
- Shin, Young Jae (Department of Electrical Engineering and Computer Science, Korea Advanced Institute of Science and Technology) ;
- Shin, Yeon Rok (Department of Chemistry, Chungbuk National University) ;
- Kim, Ju Youn (Department of Chemistry, Chungbuk National University) ;
-
Yoon, Yeo Seong
(Korea Automotive Technology Institute)
;
- Shin, Jae Sup (Department of Chemistry, Chungbuk National University)
- 지영존 (충북대학교 화학과) ;
- 신영재 (한국과학기술원 전자전산학과) ;
- 신연록 (충북대학교 화학과) ;
- 김주연 (충북대학교 화학과) ;
-
윤여성
(자동차부품연구원)
;
- 신재섭 (충북대학교 화학과)
- Received : 2006.01.16
- Accepted : 2006.02.17
- Published : 2006.03.30
Abstract
The hard coatings on the polycarbonate plate were performed with the object of substitution the glass in the car to the polycarbonate plate. In this research, [3-(methacryloyloxy)propyl]trimethoxysilane were used to prepare the coatings by sol-gel process. Butanol was used as a solvent, HCl was used as a catalyst, and AIBN was used as an initiator. Polycarbonate plate was pretreated with PMMA, and final heating of the coating was done at
자동차의 유리를 폴리카보네이트로 대체하기 위하여 폴리카보네이트 판 위에 하드 코팅을 시도하였다. 본 연구에서는 [3-(methacryloyloxy)propyl]trimethoxysilane으로부터 졸-겔 과정을 이용하여 코팅을 실시하였다. Butanol을 용매로 사용하였고, 촉매로는 HCI을 이용하였으며, 개시제로는 AIBN을 이용하였다. 폴리카보네이트 판은 PMMA를 이용하여 전처리를 하였으며, 코팅의 열처리는