대한기계학회논문집B (Transactions of the Korean Society of Mechanical Engineers B)

  • 제30권2호
  • /
  • Pages.126-135
  • /
  • 2006
  • /
  • 1226-4881(pISSN)
  • /
  • 2288-5324(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

90° 요철이 설치된 정사각 덕트 내 압력강하에 곡관부 및 회전이 미치는 영향

Influence of Turning Region and Channel Rotation on Pressure Drop in a Square Channel with Transverse Ribs

  • 김경민 (연세대학교 대학원 기계공학부) ;
  • 이동현 (연세대학교 대학원 기계공학부) ;
  • 조형희 (연세대학교 기계공학부)
  • 발행 : 2006.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The pressure drop characteristics in a rotating two-pass duct with rib turbulators are investigated in the present study. The square duct has a hydraulic diameter $(D_h)$ of 26.7 mm, and $1.5mm{\times}1.5mm$ square $90^{\circ}-rib$ turbulators are attached on the leading and trailing walls. The pitch-to-rib height ratio (p/e) is 10. The distance between the tip of the divider and the outer wall of the duct is $1.0D_h$ and the width of divider wall is 6.0mm or $0.225D_h$. The Reynolds number (Re) based on the hydraulic diameter is kept constant at 10,000 to exclude the Reynolds effect, and the rotation number (Ro) is varied from 0.0 to 0.20. The pressure drop distribution, the friction factor and thermal performance are presented for the leading, trailing and the outer surfaces. It is found that the curvature of the $180^{\circ}$-turn produces Dean vortices that cause high pressure drop in the turn. The channel rotation results in pressure drop discrepancy between leading and trailing surfaces so that non-dimensional pressure drops are higher on the trailing surface in the first-pass and on the leading and side surfaces in the second-pass. In the turning region, Dean vortices shown in the stationary case transform into one large asymmetric vortex cell, and subsequent pressure drop characteristics also change. As the rotation number increases, the pressure drop discrepancy enlarges.

키워드

참고문헌

  1. Bons, J. P. and Kerrebrock, J. L., 1999, 'Complementary Volocity and Heat Transfer Measurements in a Rotating Cooling Passage With Smooth Walls,' Journal of Turbomachinery, Vol. 121, pp. 651-652 https://doi.org/10.1115/1.2836717
  2. Chang S. W. and Morris, W. D., 2003, 'Heat Transfer in a Radially Rotating Square Duct Fitted With In-Line Transverse Ribs,' Int. J. Thermal Sciences, Vol. 42, pp. 267-282 https://doi.org/10.1016/S1290-0729(02)00026-1
  3. Han, J. C., Zhang, Y. M. and Kalkuehler, K., 1993, 'Uneven Wall Temperature Effect on Local Heat Transfer in a Rotating Two-pass Square Channel With Smooth Walls,' Journal of Heat Transfer, Vol. 115, pp. 912-920 https://doi.org/10.1115/1.2911387
  4. Wagner, J. H., Johnson, B. V. and Kopper, F. C., 1991, 'Heat Transfer in Rotating Serpentine Passages With Smooth Walls,' Journal of Turbomachinery, Vol. 113, pp. 321-330 https://doi.org/10.1115/1.2927879
  5. Mochizuki, S., Murata, A., Shibata, R. and Yang, W. J., 1999, 'Detailed Measurement of Local Heat Transfer Coefficients in Turbulent Flow Through Smooth and Rib-Roughened Serpentine Passages With a $180^{\circ}$ Sharp Bend,' Int. J. Heat and Mass Transfer, Vol. 42, pp. 1925-1934 https://doi.org/10.1016/S0017-9310(98)00308-1
  6. Liou, T. M., Chen, C. C. and Chen, M. Y., 2001, 'TLCT and LDV Measurements of Heat Transfer and Fluid Flow in a Rotating Sharp Turning Duct,' Int. J. Heat and Mass Transfer, Vol. 44, pp. 1777-1787 https://doi.org/10.1016/S0017-9310(00)00221-0
  7. Kim, K. M., Kim, S. I., Kim, Y. Y., Rhee, D. H. and Cho, H. H., 2004, 'Detailed Measurement of HeatlMass Transfer in a Rotating Two-Pass Duct (I),' Transactions of the KSME(B), Vol. 28. No.8, pp. 910-920 https://doi.org/10.3795/KSME-B.2004.28.8.910
  8. Cho, H. H., Lee, S. Y., Won, J. H. and Rhee, D. H., 2004, 'Heat/Mass Transfer in a Two-Pass Rotating Rectangular Duct With and Without $70^{\circ}$-angled Ribs,' Heat and Mass Transfer, Vol. 40, pp. 467-475 https://doi.org/10.1007/s00231-002-0389-5
  9. Stephens, M. A., Shih, T. I. and Civinskas, K. C., , 'Computations of Flow and Heat Transfer in a Rotating V-Shaped Square Duct With Smooth Walls,' AIAA Paper No. 96-3161
  10. Murata, A. and Mochizuki, S., 2004, 'Large Eddy Simulation of Turbulent Heat Transfer in a Rotating Two-Pass Smooth Square Channel With Sharp $180^{\circ}$ Turns,' Int. J. Heat and Mass Transfer, Vol. 47, pp. 683-698 https://doi.org/10.1016/j.ijheatmasstransfer.2003.07.022
  11. Ooi, A., laccarino, G., Durbin, P. A. and Behnia, M., 2002, 'Reynolds Averaged Simulation of Flow and Heat Transfer in Ribbed Ducts,' Int. J. Heat and Fluid Flow, Vol. 23, pp. 750-757 https://doi.org/10.1016/S0142-727X(02)00188-1
  12. Ahn, J., Choi, H. C. and Lee, J. S., 2004, 'Large Eddy Simulation of Flow and Heat Transfer in a Channel Roughened by Square or Semicircle Ribs,' ASME Paper No. GT2004.534014
  13. lacovides, H., Jackson, D. C., Kelemenis, G., Launder, B. E. and Yuan, Y. M., 1999, 'Experiments on Local Heat Transfer in a Rotating Square-Ended U-bend,' Int. J. Heat and Fluid Flow, Vol. 20, pp. 302-310 https://doi.org/10.1016/S0142-727X(99)00019-3
  14. Liou, T. M., Chen, C. C. and Chen, M. Y., 2003, 'Rotating Effect of on Fluid Flow in Two Smooth Ducts Connected by a 180-Degree Bend,' Journal of Fluids Engineering, Vol. 125, pp. 138-148 https://doi.org/10.1115/1.1522413
  15. Servouze, Y., Brossard, C. and Gicquel, P., 2003, 'PIV Flow Field Measurements in a Rotating U-Shaped Channel,' GTSJ Paper No. IGTI2003Tokyo TS-079
  16. Prabhu, S. V. and Vedula, R. P., 2000, 'Pressure Drop Characteristics in a Rotating Smooth Square Channel With a Sharp $180^{\circ}$ Bend,' Journal of Turbomachinery, Vol. 113, pp. 321-330 https://doi.org/10.1115/1.2927879
  17. Prabhu, S. V. and Vedula, R. P., 2003, 'Pressure Drop Characteristics in a Rib Roughened Rotating Square Duct with a Sharp $180^{\circ}$ Bend,' J. Enhanced Heat Transfer, Vol. 10, pp. 363-378 https://doi.org/10.1615/JEnhHeatTransf.v10.i4.20
  18. Kline, S. J. and McClintock, F. A., 1953, 'Describing Uncertainty in Single-Sample Experiments,' Mechanical Engineering, Vol. 75, pp. 3-8
  19. Petukhov, B. S., 1970, Advances in Heat Transfer, Academic Press, New York, Vol. 6, pp. 503-504
  20. Kim, K. M. and Cho, H. H., 2005, 'Pressure Drop Characteristics in a Coolant Passage With Turning Region and Rotation,' KFMA J. Fluid Machinery, (submitted for publication)