영구자석 형상비를 고려한 영구자석 매입형 BLDC 전동기 설계 및 특성해석

Design and Analysis of Characteristics of Interior Permanent Magnet BLDC Motor That Consider Shape-Ratio of Permanent Magnet

  • 발행 : 2006.01.01

초록

Now a day, owing to high efficiency and easy speed control of brushless DC(BLDC) motor, the demand of BLDC motor that has high power and low noises are increasing. Especially demand of interior permanent magnet(IPM) BLOC with high efficiency and high power in electric motion vehicle is increasing. IPM BLDC motor has permanent magnets in the rotor. Because it has two different flux paths, magnetic reluctance differences are generated in d-axis and q-axis. As the result of the inductance differences that are generated by the saliency(magnetic reluctance differences) in the rotor, the motor has structure advantage that has the additional reluctance torque except a magnet torque and because magnet is situated inside the rotor, the mechanical structure is strong. Therefore IPM BLDC motor makes possible to have high speed and high power. This paper presents a design and characteristics analysis of IPM BLDC motor for electric vehicle. To design IPM BLDC motor, surface mounted permanent magnet(SPM) BLDC motor is used as the initial design model. According to the shape-ratio() of permanent magnet, the characteristic of IPM BLDC motor is analyzed by Finite element method (FEM). Characteristics analysis results of the designed motor are compared with the experimental results.

키워드

참고문헌

  1. T.J.E Miller, Design of Brushless Permanent-Magnet Motor, Clarendon press, Oxford, 1994
  2. S.A. Nasar, I. Boldea, L.E.Unnewehr, Permanent Magnet, Reluctance, and Self-synchronous Motors, CRC press, 1993
  3. Kyung-Tae Kim, Kwang-Suk Kim, Sang-Moon Hwang, Tae-Jong Kim, Yoong-Ho Jung, 'Comparison of magnetic forces for IPM and SPM motor with rotor eccentricity,' IEEE Transactions on, Vol 37, pp3448-3451, September 2001 https://doi.org/10.1109/20.952634
  4. Nicola Bianchi, Silverio Bolognani, Mauro Zigliotto, 'High-performance PM synchronous motor drive for an electrical scooter,' IEEE Transactions on Magnetics, vol. 37, pp. 1348-1355, September 2001 https://doi.org/10.1109/28.952510
  5. T. Ohnishi, N. Takahashi 'Optimal Design of Efficient IPM Motor Using Finite Element Method,' IEEE Transactions on otor Using Finite Element Method,' IEEE Transactions on Magnetics, vol. 36, pp. 3537-3539, September 2000 https://doi.org/10.1109/20.908891
  6. 박정우, 구대현외, '전기자동차용 바퀴일체형 전동기 및 제어기 개발', 한국전기연구소 보고서, 1998, 보고서
  7. F. Rahman, R. Dutta 'A new rotor design of interior permanent magnet machine suitable for wide speed range.' Industrial Electronics Society, 2003. IECON '03. The 29th Annual Conference of the IEEE, vol. 1, pp. 699-704, November 2003 https://doi.org/10.1109/IECON.2003.1280067
  8. S. Kawano, H. Murakami, N. Nishiyama, Y. Ikkai, Y. Honda, T. Higaki 'High performance design of an interior permanent magnet synchronous reluctance motor for electric vehicles.' Power Conversion Conference - Nagaoka 1997. vol 1, pp. 33-36, august 1997 https://doi.org/10.1109/PCCON.1997.645581
  9. 조동혁 'Auto-Tuning 니칭 유전 알고리즘을 이용한 매입형 영구자석 전공기의 설계' 서울대학교 박사학위 논문, 2001
  10. S. Wang, J. Kang, 'Shape Optimization of BLOC Motor Using 3-D Finite Element Method.' IEEE TRANSACTIONS ON MAGNETICS, Vol. 36, No.4, pp 11119-1123, July 2000 https://doi.org/10.1109/20.877637
  11. 大天光吉, 永久磁石磁氣回路の設計 . 持性計算法 II活用編, 綜合電子リサ?テ?,1987
  12. 大天光吉, 페라이트 磁石回轉機의 設計, 東逸山板社, 2002
  13. 임달호, 전기계의 유한요소법, 동명사, 1986
  14. 강규홍, 이병국, 허진, '자속 집중형 Spoke Type 영구자석 BLDC 전동기의 자기회로 및 특성 해석' 전기의 세계, 제53권3호, pp 135-142, 2004