• 제목/요약/키워드: IPM

검색결과 410건 처리시간 0.035초

밀러 커패시턴스의 영양에 의한 IPM의 오동작과 대책 (A Fault Operation of the IPM Due to the Effect of Miller Capacitance and its Solution)

  • 조수억;강필순;김철우
    • 조명전기설비학회논문지
    • /
    • 제17권6호
    • /
    • pp.83-88
    • /
    • 2003
  • 본 논문에서는 IPM의 전기적인 기생 성분 중에서 성능에 가장 크게 영향을 미치는 밀러 커패시턴스에 의하여 발생하는 오동작을 시뮬레이션을 통하여 증명하고 이를 최소화하기 위한 방법을 제시한다. 게이트와 컬렉트 단자간에 형성되는 밀러 커패시턴스와 밀접하게 관련된 게이트-에미터 사이의 기생 커패시턴스와 게이트 저항과의 상관 관계를 PSpice 시뮬레이션을 통하여 분석한다. 또한 시뮬레이션 결과를 바탕으로 IPM의 오동작을 최소화하기 위한 보조 회로를 삽입한 주문형 IPM을 제시한다. 표준형 IPM과 오동작 방지를 위해 보조회로가 삽입된 주문형 IPM의 실험 파형을 통해서 주문형 IPM이 약 3 [V]의 오동작에 대한 여유 전압을 가짐을 확인할 수 있다.

다극 BLDC 전동기 구동을 위한 IPM(Intelligent Power Module) 성능 평가 시스템 (An IPM(Intelligent Power Module) performance evaluation system for the driving of a multi-pole BLDC motor)

  • 민병길;권영;황민규;최중경
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2014년도 춘계학술대회
    • /
    • pp.686-689
    • /
    • 2014
  • 본 논문은 다극 BLDC(Brushless Direct Current) 전동기를 구동하기 위한 인버터 게이트 구동회로 일체형 스위칭 모듈인 IPM(Intelligent Power Module)에 대한 연구이다. 여러 제조사의 IPM을 이용하여 인버터를 설계할 때 각 제조사와 IPM의 버전에 따른 전기적, 논리적 특성을 평가하는 전자회로 시스템을 설계한다.

  • PDF

주문형 IPM을 이용한 엘리베이터용 인버터의 최적화 설계 및 전도 EMI 노이즈 저감 (Optimal System Design and Minimization of Conducted EMI Noise in Elevator Inverter System by Customized IPM)

  • 조수억;강필순;김철우
    • 전력전자학회논문지
    • /
    • 제8권4호
    • /
    • pp.313-320
    • /
    • 2003
  • 본 논문에서는 부가적인 회로의 추가 없이 IPM 내부 IGBT의 게이트 저항을 시스템에 최적화된 값으로 선정하여 dv/dt 및 di/dt를 감소시키고 이로 인한 전도 EMI 노이즈를 저감하여 엘리베이터 시스템에 최적화된 전련변환장치를 설계한다. 주문형 IPM을 엘리베이터용 인버터 시스템에 최적화하기 위하여 시스템에 적용될 전력변환장치의 게이트 저항에 따른 Spike 전압 및 전동기 서지전압, 스위칭 손실에 따른 IPM 케이스와 방열판의 온도 변화등을 시뮬레이션 및 계측한다. 결과적으로 IPM의 게이트 저항을 시스템에서 요구하는 수명에 따라 최적화하여 전도되는 EMI 노이즈가 특정 주파수 대역에서 약 5∼10 [dB$\mu$Vl 저감됨을 확인할 수 있다.

교류 전동기 구동을 위한 IPM(Intelligent Power Module) IGBT 스위치 성능 분석 방법 개발 (Development of IPM(Intelligent Power Module) IGBT switch performance evaluation system for the driving of the A.C. motor)

  • 최중경
    • 한국정보전자통신기술학회논문지
    • /
    • 제15권4호
    • /
    • pp.291-297
    • /
    • 2022
  • 본 논문은 가전용 교류 전동기 구동을 위한 인버터 회로에 포함된 지능형 스위칭 모듈인 IPM 모듈에 대한 특성 및 신뢰성 계측 회로 설계 방법에 대한 연구이다. IPM은 전동기 구동기의 핵심 부품으로 그 스위칭 특성이 서보 구동 중에 일관되게 유지돼야 한다. 그 특성 중 스위치 온 특성을 결정하는 콜렉터-에미터간 도통 전압 Vce(on) 특성이 중요하다. 인버터 구성의 핵심 부품인 IPM은 여러 브랜드의 제품이 생산되고 있기 때문에 응용시스템의 최적 성능을 위해서는 IPM의 제품군에 따른 IGBT 스위치의 콜렉터-에미터간 도통 전압 Vce(on) 값을 측정하기 위한 방법 및 계측 평가 시스템이 필요하다. 제안된 방법은 제조사별 IPM이 전동기 구동회로에 장착된 상태에서 부하에 따른 Vce(on) 값을 계측 평가할 수 있는 새로운 방법으로 사용자 회사 입장에서는 중요한 설비가 될 수 있다.

IPM 동기모터의 불가역감자 특성 비교 연구 (A Comparison Study on Demagnetization Characteristics of IPM Synchronous Motor)

  • 정석원;권혁성;정현교
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2015년도 제46회 하계학술대회
    • /
    • pp.839-840
    • /
    • 2015
  • IPM(Interior Permanent Magnet) 모터는 마그네틱 토크와 릴럭턴스 토크를 이용하는 모터이다. 이런 IPM 모터에 쓰이는 영구 자석 중 희토류 자석은 온도에 취약한 특성이 있어 낮은 온도에 비해 높은 온도에서 더 쉽게 불가역감자가 발생할 수 있다. 또한 페라이트자석에 비해 상대적으로 가격이 비싸 희토류 저감 IPM 모터 개발이 지속적으로 진행되고 있다. 따라서 본 논문에서는 희토류 저감 IPM 동기모터의 영구자석 위치를 변화한 3가지 U자형 2층 IPM 모터 모델을 선정하여 회전자 전류의 크기 및 위상 그리고 약자속 제어를 고려한 불가역 감자 특성을 비교 및 분석하였다. 이렇게 분석한 결과를 바탕으로 IPM 설계 시 불가역감자에 강인한 설계 방법에 대하여 고찰하였다.

  • PDF

벼 담수직파재배시 Iprobenfos-metconazole(IPM) 처리에 따른 생육과 도복경감효과 (Growth, Lodging Reduction as Affected by Iprobenfos-metconazole(IPM) in Direct-seeded Rice on Flooded Paddy Field)

  • 이계환;최봉수;박종현;우선희;이철원
    • 한국작물학회지
    • /
    • 제58권4호
    • /
    • pp.393-398
    • /
    • 2013
  • 본 연구는 벼 담수직파재배에서 식물생장억제제인 IPM(Iprobenfos-metconazole)을 벼의 출수기 전에 처리함으로 써 벼의 생육과 도복경감효과를 구명하기 위하여 수행하였다. 1. 출수기에 간장은 식물생장억제제를 처리한 구에서 무처리구보다 간장이 단축되는 결과를 보였으며, 출수전 30일에 처리하였을 때 가장 단축효과가 컸고, 하위 4절간의 단축율이 가장 높았다. 2. 출수후 20일에 지엽의 엽색도를 조사한 결과 IPM 처리구는 무처리구에 비하여 높았고, 엽중 질소 농도는 IPM 처리구가 무처리구에 낮았으나 규산 함량은 무처리구에 비하여 높았고, 규산/질소 비율이 증가하였다. 3. 하위 절간(3~4)의 좌절중은 무처리구에 비하여 IPM 처리구가 유의하게 높았으며, 도복지수는 무처리구에 비하여 낮아지는 것으로 조사되었고 포장도복도 크게 경감되었다. 4. 수량 및 수량구성요소를 조사한 결과 IPM 처리구는 무처리구에 비하여 도복이 되지 않아서 등숙률과 천립중이 높아짐으로서 수량 증수 효과가 있었다.

10kW급 HVAC 시스템을 위한 Enhanced Interleaved PFC Boost 컨버터 형태의 650V IPM 개발 (Development of Enhanced Interleaved PFC Boost Converter typed 650V Intelligent Power Module for up to 10kW HVAC Systems)

  • 이기현;홍승현;김태현;정진용;권태성
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2018년도 전력전자학술대회
    • /
    • pp.536-538
    • /
    • 2018
  • This paper introduces an enhanced interleaved (IL) PFC (Power Factor Correction) boost converter typed 650V Intelligent Power Module (IPM), which is fully optimized hybrid IGBT converter modules; Silicon (Si) IGBT and Silicon Carbide (SiC) diode, for up to 10kW HVAC (Heating, Ventilation, and Air Conditioning) systems. It utilizes newly developed $4^{th}$ Generation Field Stop (FS) trench IGBTs, $EXTREMEFAST^{TM}$ anti-paralleled diodes, SiC Junction Barrier Schottky (JBS) diodes, Bridge rectifiers, Multi-function LVIC, and Built-in thermistor provide good reliable characteristics for the entire system. This module also takes technical advantage of DBC (Direct Bonded Copper) substrate for the better thermal performance. It is shown that the Si IGBT/SiC diode hybrid IL PFC module can achieve excellent EMI performance and greatly enhance the power handling capability or switching frequency of various applications compared to the Si IGBT/Diode. This paper provides an overall description of the newly developed 650V/50A Hybrid SiC IL PFC IPM product.

  • PDF

IPM type BLDC 전동기의 자속장벽 설치에 따른 코깅 토크 저감 (Reducing the Cogging toque of IPM type BLDC Motor according to the Flux barrier shape)

  • 양병렬;윤근영;권병일
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.67-69
    • /
    • 2004
  • This paper describes an approach to design a interior permanent magnet motor(IPM motor) for the reduction of cogging torque. The magnitude of the torque ripple and cogging torque in a interior permanent magnet motor(IPM motor) are generally dependent on several major factors: the shape of stator tooth tip, slot opening width, air gap length, the shape of barrier preventing flux leakage of magnets, magnet configuration and magnetization distribution or magnet poles. In this paper, the IPM BLDC motor is designed considering a saturated leakag flux between the barriers on the rotor for increasing the efficiency and decreasing the magnitude of the cogging torque. Analytical model is developed for the IPM BLDC motor with a concentrated winding stator. The results verifies that the proposed design approach is very efficient and effective in reducing the cogging torque and the torque ripple of the IPM BLDC motor to be used in an electric vehicle.

  • PDF

Evaluation of EDTA-based Three Methods to Detect IMP-1 and VIM-2 Type Metallo-${\beta}$-Lactamase-Producing Clinical Isolates of Imipenem Resistant Acinetobacter and Pseudomonas spp.

  • Hong, Seung-Bok;Shin, Kyung-A;Hwang, Seock-Yeon
    • 대한의생명과학회지
    • /
    • 제17권2호
    • /
    • pp.135-140
    • /
    • 2011
  • We compared three EDTA-based phenotypic screening methods for detecting IMP-1 and VIM-2 type metallo-${\beta}$- lactamase (MBL)-producing isolates of Acinetobacter and Pseudomonas spp., EDTA-double disk synergy test (EDTADDST), Etest MBL, and imipenem (IPM)-EDTA disk test. A total of 183 isolates (65 Acinetobacter spp. and 118 Pseudomonas spp. showing IPM resistance), confirmed to MBL genes by PCR, were used. The criteria for MBL production were (i) presence of a synergistic zone between IPM and EDTA disks in EDTA-DDST, (ii) reduction of IPM minimal inhibitory concentration by ${\geq}$ 3 twofold dilutions in the presence of EDTA in the Etest MBL, and (iii) ${\geq}$ 7 mm increase in the inhibition zone around the IPM plus EDTA disks compared with a sole IPM disk in the IPM-EDTA disk test. In this study using 87 MBL-producing and 96 MBL-nonproducing isolates, the sensitivities/specificities of EDTA-DDST, Etest MBL and IPM-EDTA disk tests were 94.3/78.1%, 89.7/91.7%, and 97.7/95.8%, respectively. When the threshold for the increase of the inhibition zone around the IPM plus EDTA disk over a sole IPM disk was altered to ${\geq}$ 5 mm and ${\geq}$ 8 mm for Acinetobacter spp. and Pseudomonas spp., respectively, the sensitivity and specificity of the test were 98.9% and 96.9%, respectively. Of the three EDTA-based phenotypic tests, the IMP-EDTA disk test was superior for detection of MBL-producing isolates.

신규 Carbapenem 유도체 CRB 529 및 CRB 550의 생체내 항균효과와 약물동태의 비교 (Comparison of in Vivo Antibacterial Activities and Pharmacokinetics of New Carbapenem Derivatives, CRB 529 and CRB 550, in Mice and Rats)

  • 김준겸;민관기;이주몽;이홍우;김정우
    • 약학회지
    • /
    • 제39권4호
    • /
    • pp.360-366
    • /
    • 1995
  • 1-$\beta$-Methyl carbapenem-2-substituted pyrroudine derivatives. CRB 529 and CRB 550, were synthesized as investigational carbapenem derivatives. It has been reported that the in vitro antibacterial activities of the compounds against G(+) and G(-) bacteria were almost the same or more effective than those of imipenem (IPM) and meropenem (MEPM), and also showed better in vivo efficacy than MEPM and inlipeneni/cilastatin (IPM/CS) against representative G(-) organisms, P. aeruginosa and MRSA organisms, S. aureus. The antibacterial activities, pharmacokinetics and protective efficacy of IPM/CS and CRB 529 and CRB 550 wereconducted after subcutaneous or intravenous administration to mice and rats. The pharmacokinetic parameters of CRB 529 and CRB 550 in mice were as follows: the observed maximal serum concentrations (C$_{max}$) following I.V. administration were 87.5 and 101 $\mu\textrm{g}$/ml for CRB 529 and CRB 550, respectively, and 63.6 $\mu\textrm{g}$/ml for IPM/CS. The half-lives (t$_{1/2}$) were 14.0 and 12.0 n-dn for CRB 529 and CRB 550, respectively, and 14.8 min for IPM/CS. In rats, $C_{max}$ after I.V. administration were 74.0 and 91.8 $\mu\textrm{g}$/ml for CRB 529 and CRB 550, respectively, and 41.2 $\mu\textrm{g}$/ml for IPM/CS. The tissue levels of CRB 529 and CRB 550 and IPM/CS after I.V. administration at a dose of 20 mg/kg decreased by the following order: lung, heart, kindney, liver and spleen for CRB 529, lddney, liver. lung, heart and spleen for CRB 550 and kidney, lung, liver, heart, spleen and brain for IPM/CS. In systemic infection, CRB 529 and CRB 550 showed excellent efficacies against P. aeruginosa and S. aureus (MRSA) at a dose of 5 mg/kg. The PD$_{50s}$ were 0.80, 0.36 mg/kg for CRB 529 and CRB 550, respectively, and 3.22 mg/kg for IPM/CS against P. aeruginosa. The corresponding values against S. aureus (MRSA) were 76.0, 55.3 mg/kg for CRB 529 and CRB 550, respectively, and 146 mg/kg for IPM/CS. In local infection, the antibacterial activities of CRB 529 and CRB 550 were more effective than those of IPM/CS against intrarenal infection with E. coli and P. aeruginosa and also showed as effective as IPM/CS against respiratory tract infection with E. coli and P. aeruginosa at a dose of 5 mg/kg.

  • PDF