Evalulation of Specific Gravity in Post Member by Drilling Resistance Test

  • Park, Chun-Young (Dept. of Forest Sciences, College of Agriculture & Life Science, Seoul National University) ;
  • Kim, Se-Jong (Dept. of Forest Sciences, College of Agriculture & Life Science, Seoul National University) ;
  • Lee, Jun-Jae (Dept. of Forest Sciences, College of Agriculture & Life Science, Seoul National University)
  • Received : 2005.01.15
  • Accepted : 2005.11.01
  • Published : 2006.03.25

Abstract

The structural wooden members of the ancient building are deteriorated by fungi and termite over time. The deteriorate of the members causes the decrease of the specific gravity and the strength of it, so the stability of the building is threatened. Therefore, in this study, the evaluation of the specific gravity, which is correlated with the strength of the wood, was conducted in the post member using Nondestructive Evaluation (NDE) - Drilling Resistance Test (DRT). For the purpose of it, the specific gravity and drilling resistance of small specimens was measured to obtain the correlation between the specific gravity and the drilling resistance. And then, the drilling resistance test of the post members, which were expected to have the deteriorated parts, was performed. Consequently, the correlation between the specific gravity and the drilling resistance was very high ($R^2=0.89$) and the distributions of the specific gravity were evaluated for the each member. Also, the results were verified by the visual inspection of the cross section of it. Especially, the various variations of the wood member such as the deteriorated parts with termite or fungi and the crack could be detected exactly but the knot couldn't because the drill could pass by or could not penetrate the knot.

Keywords

Acknowledgement

Supported by : Agricultural R & D Promotion Center

References

  1. Fuller, J. J., R. J. Ross, and J. R. Dramm. 1994. Honeycomb and surface check detection using ultrasonic nondestructive evaluation. Res. Note. FPL-RN-0261
  2. Wilcox, W.W. 1988. Detection of early stages of wood decay with ultrasonic pulse velocity. Forest products journal. Vol. 38(5). 68-73
  3. Jun-Jae Lee and Mun-Sung Bae. 2004. Determination of ratio of wood deterioration using NOT technique. MOKCHAE KONGHAK, Vol. 32(3). 33-41
  4. Rinn, F. 1994. Catalog of relative density profiles of trees, poles and timber derived from resistograph micro-drillings. Ninth international symposium on nondestructive testing of wood
  5. Helms, D. and P. Niemz. 1994. New applications Evaluation of Specific Gravity in Post Member by Drilling Resistance Test of the drill resistance method for quality evaluation of wood and wood products. Proceedings of the ninth international symposium on nondestructive testing of wood. September 22-24, Madison, WL;Washington State Uni. 95-102
  6. Bethe, K. and C. Mattheck. 1998. Instruments for detection and evaluation of decay and wood quality in standing trees. Eleventh international symposium on nondestructive testing of wood
  7. Shinozuka, M. 1983. Basic Analysis of Structural Safety. Journal of the Structural Engineering, Vol 109. No 3, p. 721-740 https://doi.org/10.1061/(ASCE)0733-9445(1983)109:1(1)