Effect of Final Annealing and Stress on Creep Behavior of HANA Zirconium Fuel Claddings

HANA 지르코늄 핵연료피복관의 크립거동에 미치는 최종 열처리 및 응력의 영향

  • Kim, H.G. (Zirconium Fuel Cladding Team, Korea Atomic Energy Research Institute) ;
  • Kim, J.H. (Zirconium Fuel Cladding Team, Korea Atomic Energy Research Institute) ;
  • Jeong, Y.H. (Zirconium Fuel Cladding Team, Korea Atomic Energy Research Institute)
  • 김현길 (한국원자력연구소 지르코늄신합금 핵연료피복관 개발팀) ;
  • 김준환 (한국원자력연구소 지르코늄신합금 핵연료피복관 개발팀) ;
  • 정용환 (한국원자력연구소 지르코늄신합금 핵연료피복관 개발팀)
  • Received : 2005.06.02
  • Accepted : 2005.07.15
  • Published : 2005.07.30

Abstract

Thermal creep properties of the advanced zirconium fuel claddings named by HANA alloys which were developed for high burn-up application were evaluated. The creep test of HANA cladding tubes was carried out by the internal pressurization method in temperature range from 350 to $400^{\circ}C$ and in the hoop stress range from 100 to 150 MPa. Creep tests were lasted up to 800 days, which showed the steady-state secondary creep rate. The creep resistance of HANA fuel claddings was affected by final annealing temperature and various factors, such as alloying element, applied stress and testing temperature. From the results the microstructure observation of the samples before and after creep test by using TEM, the dislocation density was increased in the sample of after creep test. The Sn as an alloying element was more effective in the creep resistance than other elements such as Nb, Fe, Cr and Cu due to solute hardening effect of Sn. In case of HANA fuel claddings, the improved creep resistance was obtained by the control of final heat treatment temperature as well as alloying element.

Keywords

Acknowledgement

Supported by : 과학기술부

References

  1. G. P. Sabol, G. R. Kilp, M. G. Balfour and E. Roberts, Zirconium in the Nuclear Industry, ASTM STP. 1023 (1989) 227
  2. J. P. Mardon, D. Chearquet and J. Senevat, Zirconium in the Nuclear Industry, ASTM STP. 1354 (2000) 505
  3. D. B. Knorr and M. R. Notis, J. Nucl. Mater., 56 (1975) 18 https://doi.org/10.1016/0022-3115(75)90193-2
  4. M. Limback and T. Andersson, Zirconium in the Nuclear Industry, ASTM STP. 1295 (1996) 448
  5. J. M. Frenkel and M. Weisz, Zirconium in the Nuclear Industry, ASTM STP. 551 (1974) 140
  6. F. Garzarolli, H. Stehle and E. Steinberg, Zirconium in the Nuclear Industry, ASTM STP. 1295 (1996) 12
  7. D. G. Frankline, G. E. Lucas and A. L. Bement, Zirconium in the Nuclear Industry, ASTM STP. 815 (1983) 31
  8. K. H. Kim, C. Nam, M. H. Lee, Y. H. Jeong and Y. H. Jung, Proc. the Korean Nuclear Socity Fall Meeting (1999)
  9. G. E. Dieter, Mechanical Metallurgy, 3rd. Ed., McGraw-Hill, 135 (1988)
  10. W. A. McInter, D. L. Baty and K. O. Stein, Zirconium in the Nuclear Industry, ASTM STP. 1023 (1989) 621
  11. N. Christodoulou, P. A. Turner, C. N. Tome, C. K. Chow and R. J. Klassen, Metal and Mater. Trans., 33A (2002) 1103
  12. R. Brenner, J. L. Bechade, O. Castelnau and B. Bacroix, J. Nucl. Mater., 305 (2002) 175 https://doi.org/10.1016/S0022-3115(02)00923-6