한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제22권3호
  • /
  • Pages.187-193
  • /
  • 2005
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

레이저를 이용한 금속액적 적층시 온도분포와 잔류응력 해석

Analysis of Temperature Distribution and Residual Stress in Deposition Process of Metal Droplet by Using Laser Beam

  • 윤진오 (전남대학교 대학원 기계공학과) ;
  • 양영수 (전남대학교 기계공학과)
  • 발행 : 2005.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The temperature distribution of the deposited droplet was predicted by using the finite element analysis and it was assumed that the droplet was axisymmetrical model. The analysis of residual stress was performed with the temperature data, which is obtained from the result. Axisymmetric droplet is deposited three times to consider the actual phenomenon of droplet deposition. The analysis of the temperature distribution is respectively performed whenever the axisymmetric droplet is laminated and the residual stresses of the laminated axisymmetric droplet are calculated with the value of the temperature distribution.

키워드

참고문헌

  1. Jacobs, P. F., Rapid Prototyping & Manufacturing: Fundamentals of StereoLithograhy, SME, 1992
  2. Deckard, C. R. and Beaman, J. J., 'Recent Advances in Selective Laser Sintering,' Fourteenth Conf. Production Research and Technology, pp. 447-452, 1987
  3. Crump, S. S., 'Fast, Safe Prototypes with FDM,' PED-Intell. Des. Manfg Proto., Vol. 50,1992
  4. Prinz, F. B., Weiss, L. E., Amon, C. H. and Beuh, J. L., 'Processing, Thermal and Mechanical Issues in Shape Deposition Manufacturing,' Solid Freeform Fabrication Symposium, Austin, Texas, pp.118-129, 1995
  5. Orme, M. and Huang, C., 'Phase Change Multipulation for Droplet-Based Solid Freeform Fabrication,' ASME J. Heat Transfer, Vol. 119, pp. 818-823,1997 https://doi.org/10.1115/1.2824188
  6. Liu, Q. B., Huang, C. Z. and Orme, M., 'Mutual Electrostatic Interactions Between Closely Spaced Charged Solder Droplets,' Atomization and Sprays, Vol. 10, pp. 565-585,2000
  7. Amon, C. H., Beuth, J. L., Weiss, L.E., Merz, R. and Prinz, F. B., 'Shape Deposition Manufacturing with Microcasting: Processing, Thermal and Mechanical Issues,' ASME J. Manufacturing Science and Engineering, Vol. 120, pp. 656-667, 1998 https://doi.org/10.1115/1.2830171
  8. Atkinson, D., Rapid Prototyping and Tooling: A Practical Guide, Strategy Publication Ltd., UK, 1997
  9. Yoo, S. B., Yang, Y. S. and Kim, Y. W., 'A Study on the Uniform Metal-Droplet Deposition Using Laser,' Proceedings of the Korean Society of Precision Engineering Conference, pp. 667-670, 2002
  10. Kim, Y. W., Yang, Y., S., 'Collision Behavior of Molten Metal Droplet by Nd-Yag Laser BeamNd-Yag,' Proceedings of the Korean Society of Laser Processing Conference, pp. 122-126,2003