소성∙가공 (Transactions of Materials Processing)

한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

차체용 판넬의 프레스성형 특성에 대한 온도의존성

Temperature Dependency of Press-working Property of Auto-body Panels in Warm Condition

  • 이항수 (한라대학교 기계자동차공학부)
  • 발행 : 2005.11.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

키워드

참고문헌

  1. J. O. Kumpulainen, A. J. Ranta-Eskola, R. H. O. Rintamaa, 1983, Effects of Temperature on Deep Drawing of Sheet Metals, J. Engineering Materials and Technology, Vol. 105, pp. 119-127 https://doi.org/10.1115/1.3225625
  2. 渡部 豈臣, 1887, 局部加熱プレス成形における加熱裝置と金型構造, プレス技術, Vol. 25, No.9, pp. 64-70
  3. T. Ohwue, H. Takechi, Y. Furono, 1987, Deep Drawability of Square Shells in Warm Working Condition, Journal of JSTP, Vol. 28, No. 318, pp. 706-711
  4. H. Y. Ryu, Y. E. Kim, J. H. Kim, 2000, Investigation of Formability of Cylindrical Cups in Warm Drawing of Stainless-Aluminum Clad Sheet Metal, Trans. KSME(A), Vol. 24, No. 1, pp. 87-93
  5. H. Y. Ryu, Y. E. Kim, J. H. Kim, 2001, Improvement of Square Cup Drawability of Clad Sheet Metal by Warm Form Technique, Trans. of Material Processing, KSTP, Vol. 10, No.3, pp. 253-260
  6. J. H. Kim, C. S. Choi, B. Y. Jeong, G. H. Lee, 1991, Deep Drawing of Stainless Steel in Warm Working Condition Using a Single Crank Press, Proc. 4th Int. Con. on Tech. of Plasticity, Beijing, China, pp.1691-1694
  7. C. S. Choi, Y. C. Choi, Y. K. Oh, H. S. Lee, 2000, Reduction of Drawing Process in Warm Forming Steel Sheets Using Oil Pan, Trans. of Material Processing, KSTP, Vol. 9, No.7, pp. 699-705
  8. 이항수, 김충환, 전기찬, 김중재, 유동진, 1994, 금형재료의 열특성이 스탬핑에 미치는 영향 , 박판성형기술의 진보, 한국소성가공학회 94 박판성형 심포지움, pp.79-86
  9. C. S. Choi, Y. C. Choi, Y. K. Oh, J. W. Lee, H. S. Lee, 2001, Effect of Cold Forming Method on Drawability in Trunk Floor Panel, Trans. of Material Processing, KSTP, Vol. 10, No.2, pp. 123-129
  10. T. Ohwue, H. Takechi, Y. Furono, 1987, Temperature Dependence of Tensile Properties and Drawability of Steel Sheets in Warm Working Condition, Journal of JSTP, Vol. 28, No. 314, pp. 225-231
  11. T. Ohwue, H. Takechi, Y. Furono, 1990, Temperature Dependency of Mechanical Properties of Steel Sheets and Its Application to Deep Drawing in Warm Working Condition, Advanced Tech. of Plasticity, Proc. 3rd Int. Conf. on Tech. of plasticity, pp. 1283-1288
  12. T. Ohwue, T. Katayama, M. Usuda, 1991, Formability of High Strength Steel Sheets in Warm Working Condition, IDDRG Working Group Meeting, Pisa, Italy, pp. 1-7
  13. H. S. Lee, Y. K. Oh, 2001, The Tensile Characteristics of Steel Sheets at Various Temperature Conditions, Trans. of Material Processing, KSTP, Vol. 10, No.2, pp. 101-110
  14. S. P. Keeler, W. A. Bachofen, 1963, Plastic Instability and Fracture in Sheets Stretched over Rigid Punches, Trans. ASM, Vol. 56, pp. 25-48
  15. J. Lian, B. Baudelet, 1987, Forming Limit Diagram of Sheet Metal in the Negative Minor Strain Region, Materials Science and Engineering, Vol. 86, pp. 137-144 https://doi.org/10.1016/0025-5416(87)90448-4
  16. C. H. Toh, 1989, Prediction of the Forming Limit Curves of Sheet Materials Using the Rigid-plastic Finite Element Method, Int. J. Mech. Sci., Vol. 29, No.3, pp. 333-343
  17. 전기찬, 유동진, 이정우, 1989, 자동차 차체판넬의 개발에 있어서 변형측정법 및 성형한계도의 이용, 한국자동차공학회지, Vol. 2, pp. 7-13
  18. H. S. Lee, 2000, Study on the Forming Limit Diagram of Steel Sheets for the Automotive Body Panels at Various Temperature, Trans. of Material Processing, KSTP, Vol. 9, No.7, pp. 746-753
  19. L. Gaines, R. Cuenca, F. Stodolsky, S. Wu, 1996, Potential Automotive Uses of Wrought Magnesium Alloys, Proc. of Automotive Technology Development Conference, Detroit, USA
  20. K. Droder and St. Janssen, 1999, Forming of Magnesium Alloys: A Solution for Light Weight Construction, Proc. of SAE Conference
  21. Paul E. Krajewski, 2001, Elevated Temperature Forming of Sheet Magnesium Alloys, Proc. of SAE Conference
  22. F. Chen, T. Huang, 2003, Formability of Stamping Magnesium-alloy AZ31 Sheets, Journal of Materials Processing Technology Vol. 142, pp. 643-647 https://doi.org/10.1016/S0924-0136(03)00684-8

피인용 문헌

  1. Time-dependent springback of advanced high strength steels vol.29, 2012, https://doi.org/10.1016/j.ijplas.2011.07.008