Browse > Article
http://dx.doi.org/10.5228/KSPP.2005.14.8.655

Temperature Dependency of Press-working Property of Auto-body Panels in Warm Condition  

Lee H.S. (한라대학교 기계자동차공학부)
Publication Information
Transactions of Materials Processing / v.14, no.8, 2005 , pp. 655-660 More about this Journal
Keywords
Citations & Related Records
연도 인용수 순위
  • Reference
1 H. Y. Ryu, Y. E. Kim, J. H. Kim, 2001, Improvement of Square Cup Drawability of Clad Sheet Metal by Warm Form Technique, Trans. of Material Processing, KSTP, Vol. 10, No.3, pp. 253-260
2 H. S. Lee, 2000, Study on the Forming Limit Diagram of Steel Sheets for the Automotive Body Panels at Various Temperature, Trans. of Material Processing, KSTP, Vol. 9, No.7, pp. 746-753
3 L. Gaines, R. Cuenca, F. Stodolsky, S. Wu, 1996, Potential Automotive Uses of Wrought Magnesium Alloys, Proc. of Automotive Technology Development Conference, Detroit, USA
4 K. Droder and St. Janssen, 1999, Forming of Magnesium Alloys: A Solution for Light Weight Construction, Proc. of SAE Conference
5 Paul E. Krajewski, 2001, Elevated Temperature Forming of Sheet Magnesium Alloys, Proc. of SAE Conference
6 F. Chen, T. Huang, 2003, Formability of Stamping Magnesium-alloy AZ31 Sheets, Journal of Materials Processing Technology Vol. 142, pp. 643-647   DOI   ScienceOn
7 T. Ohwue, H. Takechi, Y. Furono, 1990, Temperature Dependency of Mechanical Properties of Steel Sheets and Its Application to Deep Drawing in Warm Working Condition, Advanced Tech. of Plasticity, Proc. 3rd Int. Conf. on Tech. of plasticity, pp. 1283-1288
8 T. Ohwue, T. Katayama, M. Usuda, 1991, Formability of High Strength Steel Sheets in Warm Working Condition, IDDRG Working Group Meeting, Pisa, Italy, pp. 1-7
9 H. S. Lee, Y. K. Oh, 2001, The Tensile Characteristics of Steel Sheets at Various Temperature Conditions, Trans. of Material Processing, KSTP, Vol. 10, No.2, pp. 101-110
10 S. P. Keeler, W. A. Bachofen, 1963, Plastic Instability and Fracture in Sheets Stretched over Rigid Punches, Trans. ASM, Vol. 56, pp. 25-48
11 J. Lian, B. Baudelet, 1987, Forming Limit Diagram of Sheet Metal in the Negative Minor Strain Region, Materials Science and Engineering, Vol. 86, pp. 137-144   DOI   ScienceOn
12 H. Y. Ryu, Y. E. Kim, J. H. Kim, 2000, Investigation of Formability of Cylindrical Cups in Warm Drawing of Stainless-Aluminum Clad Sheet Metal, Trans. KSME(A), Vol. 24, No. 1, pp. 87-93
13 이항수, 김충환, 전기찬, 김중재, 유동진, 1994, 금형재료의 열특성이 스탬핑에 미치는 영향 , 박판성형기술의 진보, 한국소성가공학회 94 박판성형 심포지움, pp.79-86
14 C. H. Toh, 1989, Prediction of the Forming Limit Curves of Sheet Materials Using the Rigid-plastic Finite Element Method, Int. J. Mech. Sci., Vol. 29, No.3, pp. 333-343
15 전기찬, 유동진, 이정우, 1989, 자동차 차체판넬의 개발에 있어서 변형측정법 및 성형한계도의 이용, 한국자동차공학회지, Vol. 2, pp. 7-13
16 渡部 豈臣, 1887, 局部加熱プレス成形における加熱裝置と金型構造, プレス技術, Vol. 25, No.9, pp. 64-70
17 T. Ohwue, H. Takechi, Y. Furono, 1987, Deep Drawability of Square Shells in Warm Working Condition, Journal of JSTP, Vol. 28, No. 318, pp. 706-711
18 J. H. Kim, C. S. Choi, B. Y. Jeong, G. H. Lee, 1991, Deep Drawing of Stainless Steel in Warm Working Condition Using a Single Crank Press, Proc. 4th Int. Con. on Tech. of Plasticity, Beijing, China, pp.1691-1694
19 C. S. Choi, Y. C. Choi, Y. K. Oh, H. S. Lee, 2000, Reduction of Drawing Process in Warm Forming Steel Sheets Using Oil Pan, Trans. of Material Processing, KSTP, Vol. 9, No.7, pp. 699-705
20 C. S. Choi, Y. C. Choi, Y. K. Oh, J. W. Lee, H. S. Lee, 2001, Effect of Cold Forming Method on Drawability in Trunk Floor Panel, Trans. of Material Processing, KSTP, Vol. 10, No.2, pp. 123-129
21 T. Ohwue, H. Takechi, Y. Furono, 1987, Temperature Dependence of Tensile Properties and Drawability of Steel Sheets in Warm Working Condition, Journal of JSTP, Vol. 28, No. 314, pp. 225-231
22 J. O. Kumpulainen, A. J. Ranta-Eskola, R. H. O. Rintamaa, 1983, Effects of Temperature on Deep Drawing of Sheet Metals, J. Engineering Materials and Technology, Vol. 105, pp. 119-127   DOI   ScienceOn