Korean Chemical Engineering Research

  • 제43권1호
  • /
  • Pages.85-91
  • /
  • 2005
  • /
  • 0304-128X(pISSN)
  • /
  • 2233-9558(eISSN)
한국화학공학회 (The Korean Institute of Chemical Engineers)
권호 표지

PET 기판상에 ECR 화학증착법에 의해 제조된 SnO2 투명도전막의 특성

Characteristics of Transparent Conductive Tin Oxide Thin Films on PET Substrate Prepared by ECR-MOCVD

  • 김연석 (홍익대학교 화학공학과) ;
  • 전법주 (한국과학기술연구원 나노환경연구센터) ;
  • 주재백 (홍익대학교 화학공학과) ;
  • 손태원 (홍익대학교 화학공학과) ;
  • 이중기 (한국과학기술연구원 나노환경연구센터)
  • Kim, Yun Seok (Department of Chemical Engineering, Hongik University) ;
  • Jeon, Bup Ju (Eco-Nano Technology Research Center, Korea Institute of Science and Technology) ;
  • Ju, Jeh Beck (Department of Chemical Engineering, Hongik University) ;
  • Sohn, Tae Won (Department of Chemical Engineering, Hongik University) ;
  • Lee, Joong Kee (Eco-Nano Technology Research Center, Korea Institute of Science and Technology)
  • 투고 : 2004.08.24
  • 심사 : 2004.11.05
  • 발행 : 2005.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

ECR-MOCVD를 이용한 상온조건에서 투명전도성 고분자막이$(CH_3)_4Sn-H_2-O_2$ 분위기하에 $SnO_2$막이 제조되었다. 제조된 투명전도막의 전기적특성은 공정압력, 전자석/분사링/기판사이의 거리, 전자석의 전류, 마이크로파 출력, 증착시간과 같은 공정변수에 따라 조사되었다. 마이크로파 출력과 전자석의 전류가 증가함에 따라 낮은 전기적 저항을 갖는 $SnO_2$막이 형성되었다. 또한 이들 공정변수들이 증착된 막의 광학적특성에 미치는 영향은 중요하게 나타났다. ECR-MOCVD에 의해 제조된 막의 투과도와 반사도는 380-780 nm의 가시광영역에서 각각 93-98%, 0.1-0.5%였다. 증착된 막의 평균 grain 크기는 공정변수에 관계없이 20-50 nm범위의 값으로 일정하였다. 본 연구의 최적화된 조건에서 전기적저항은 $7.5{\times}10^{-3}ohm{\cdot}cm$, 투과도 93%, 반사도 0.2%를 갖는 막이 얻어졌다.

$SnO_2$ films were prepared at room temperature under a $(CH_3)_4Sn-H_2-O_2$ atmosphere in order to obtain transparent conductive polymer by using ECR-MOCVD (Electron Cyclotron resonance -Metal Organic Chemical Vapor Deposition) system. The electrical properties of the films were investigated as function of process parameters such as deposition time, microwave power, magnetic current power, magnet/showering/substrate distance and working pressure. An increase in microwave power and magnetic current power brought on $SnO_2$ film formation with low electric resistivity. On the other hand, the effects of process parameters described above on optical properties were insignificant in the range of our experimental scope. The transmittance and reflectance of the films prepared by the ECR-MOCVD exhibited their average values of 93-98% at wave length range of 380-780 nm and 0.1-0.5%, respectively. The grain size of the $SnO_2$ films that are also insensitive with the process parameters were in the range of 20-50 nm. On the basis of experimental data obtained in the present study, electrical resistivity of $7.5{\times}10^{-3}ohm{\cdot}cm$, transmittance of 93%, and reflectance of 0.2% can be taken as optimum values.

키워드

과제정보

연구 과제 주관 기관 : 과학기술부

참고문헌

  1. Vessen, J. L., 'Physics of Thin Films,' (Georg Hass, ed.) Academic Press. New York, 9, 1-71(1981)
  2. Deschamps, F. L., 'Recent Development Results in Color-Plasma Display,' SID, 315-318(1994)
  3. Radha Krishna, B., Subramanyam, T. K., Srinivasulu Naidu, B. and Uthanna, S., 'Effect of Substrate Temperature on the Electrical and Optical Properties of dc Reactive Magnetron Sputtered Indium Oxide Films,' Optical Materials, 15(3), 217-224(2000) https://doi.org/10.1016/S0925-3467(00)00041-0
  4. Girtan, M., Rusu, G. I. and Rusu, G. G., 'The Iinfluence of Preparation Conditions on the Electrical and Optical Properties of oXidized Indium Thin Films,' Materials Science and Engineering, B76(2), 156-160(2000)
  5. Robbins, J. J., Alexander, R. T., Xiao, W., Vincent, T. L. and Wolden, C. A., 'An Investigation of Tin Oxide Plasma-Enhanced Chemical Vapor Deposition using Optical Emission Spectroscopy,' Thin Solid Films, 406, 145-150(2002) https://doi.org/10.1016/S0040-6090(02)00051-2
  6. Dolbec, R., El Khakani, M. A., Serventi, A. M. and Saint jacques, R. G., 'Influence of the Nanostructural Characteristics on the Gas Sensing Properties of Pulsed Laser Deposited Tin Oxide Thin Films,' Sensors and Actuators B: Chemical, 93(1-3), 566-571(2003) https://doi.org/10.1016/S0925-4005(03)00339-3
  7. Shanthi, E., Dutta, V., Banerjee, A. and Chopra, K. L., 'Electrical and Optical Properties of Undoped and Antimony Doped Tin Oxide Films Doped Tin Oxide Films,' J. Appl. Phys., 51(12), 6243-6251(1980) https://doi.org/10.1063/1.327610
  8. Shanthi, E., Dutta, V., Banerjee, A. and Chopra, K. L., 'Electrical and Optical Properties of Undoped and Antimony Doped with F and (Sb+F),' J. Appl. Phys., 53(3), 1612-1615(1982)
  9. Wu, W.-F., Chiou, B.-S. and Hsieh, S.-T., 'Effect of Sputtering Power on the Structural and Optical Properties of RF Magnetron Sputtered ITO Fimls,' Semicond. Sci. Technol, 9(6), 1242-1249(1994) https://doi.org/10.1088/0268-1242/9/6/014
  10. Jeong, W.-J., Kim, S.-K., Kim, J.-U., Park, G.-C. and Gu, H.-B., 'Properties of Indium Tin Oxide Transparent Conductive Thin Films at Various Substrate and Annealing Temperature,' Tran. Elec. Electronic Materials, 3(1), 18-22(2002) https://doi.org/10.4313/TEEM.2002.3.1.018
  11. Ataev, B. M., Mamedov, V. V., Omaev, A. K. and Magomedov, B. A., 'Epitaxial ZnO Films Grown by RF-Assisted Low-Temperature CVD Method,' Materials Science in Semiconductor Processing, 6(5-6), 535-537(2003) https://doi.org/10.1016/j.mssp.2003.08.012
  12. Water, W. and Chu, S.-Y., 'Physical and Structural Properties of ZnO Sputtered Films,' Materials Letters, 55(1-2), 67-72(2002) https://doi.org/10.1016/S0167-577X(01)00621-8
  13. Yusta, F. J., Hitchman, M. L. and Shamlian, H., 'CVD Preparation and Characterization of tin Dioxide Films for Electrochemical Application,' J. Mater. Chem, 7(8), 1421-1427(1997) https://doi.org/10.1039/a608525c
  14. Chow, T. P., Chezzo, M. and Baliga, B. J., 'Antimony-Doped tin Oxide Films Deposited by the Oxidation of Tetramethyltin and Trimethylantimony,' J. Electrochem. Soc, 129(5), 1041-1045(1982)
  15. Hyun, J., Jeon, B. J., Byun, D. and Lee, J. K., 'Effect of Process Parameters on the Adhesion of Copper Film on Polyethylene Tetrephthalate (PET) Substrate Prepared by ECRMOCVD Coupled with a Periodic DC Bias,' Mat. Res. Soc. Symp. Proc., 795, U8.5.1-6(2004)
  16. Jeon, B. J. and Lee, J. K., 'Preparation and Characterization of Copper Film on Plastic Substrate by ECR-MOCVD Coupled with a DC Bias,' Mat. Res. Soc. Symp. Proc., 812, F3.23.1-6(2004)