Journal of Korean Society of Steel Construction (한국강구조학회 논문집)

Korean Society of Steel Construction (한국강구조학회)
권호 표지

Inelastic Cyclic Behavior of Locally Buckled Steel Members

국부좌굴된 강구조부재의 비탄성 반복 거동

  • Received : 2005.01.15
  • Accepted : 2005.03.29
  • Published : 2005.04.27
Download PDF
⟨ Previous Next ⟩

Abstract

Post-local buckling behavior is a very important consideration in plastic and seismic design of steel structures. It describes the structural behavior up to the final collapse state. In order to assess the actual reliability of structures under severe repeated loading, such as strong earthquakes, it is necessary to evaluate the progressive cyclic deterioration of stiffness as well as the strength and energy dissipation capacity of the structures after local buckling happens. In this study, a simple analytical model developed for predicting post-local buckling behavior for cyclic and non-proportional loading histories, has been proposed. This analytical model uses the stress resultant model based on the two surface model. Analytical moment-curvature relationship using this model compare well with the experimental results in constant amplitude cycling, and linearized energy deterioration which is very important in seismic design can be predicted from the proposed model.

소성설계에 있어서 국부좌굴 후의 거동은 매우 중요한 고려사항이며, 최종 붕괴상태에 이르는 거동을 설명한다. 지진과 같은 복잡한 하중에 대하여 구조물의 실질적인 신뢰성을 얻기 위해, 국부좌굴 이후의 구조물의 점진적인 소재의 약화와 강성과 강도의 감소, 에너지 소실능력을 평가하여야 한다. 본 연구에서는, two-surface 모델에 근거하여 반복 불비례 하중에서의 국부좌굴 후 거동을 예측하기 위하여 제시된 stress resultant model을 이용하여, 단순화된 국부좌굴해석모델을 제안하였다. 이 모델을 사용한 해석적 모멘트-곡률관계는 일정한 반복 사이클 내에서 실험결과와 적절히 부합하며, 내진설계에 있어 중요한 선형 분포된 에너지 감소를 제안 모델로부터 예측할 수 있다.

Keywords

Acknowledgement

Supported by : 중앙대학교

References

  1. 김덕재 이은택(2000) 강구조 이론과 한계상태설계, 기문당
  2. 이은택 김철환(1999) 반복하중을 받는 I-형강의 국부좌굴, 대한건축학회지회 연합논문집, 제1권, 제1호, 10월, pp. 201-209
  3. AISC(2001) Manual of Steel Construction, Load & Resistance Factor Design, 3rd Ed.
  4. Bijlaard, P. P. and Fisher, G. P.(1952) Interaction of Column and Local Buckling, NACA TN No. 2640, March
  5. Bijlaard, P. P. and Fisher, G. P.(1953) Column Strength of H-Sections and Square Tubes in Post Buckling Range of Component Plates, NACA TN No. 2994, Aug.
  6. Bulson, P.S.(1969) The Stability of Flat Plates, American Elsevier Pub. Co.
  7. Chang, K. C. and Lee, G. C.(1986) Constitutive Relations of Structural Steel Under Nonproportional Loading, Journal of Engineering Mechanics ASCE, Vol. 112, No. 8, August, pp.806-820
  8. Dafalias, Y. F., and Popov, E. P.(1975) A Model for Nonlinearly Hardening Materials for Complex Loading, Acta Mechanica, Vol. 21, No. 3, pp.173- 192 https://doi.org/10.1007/BF01181053
  9. Dafalias, Y. F., and Popov, E. P.(1976) Plastic Internal Variables Formalism of Cyclic Plasticity, Journal of Applied Mechanics, Vol. 98, No.4, December, pp.645-651
  10. Graves-Smith, T. R.(1969) The Ultimate Strength of Locally Buckled Columns of Arbitrary Length, Thin Walled Steel Structures, Eds. Rockey and Hill, Crosby Lockwood, London, pp.35-60
  11. Haaijer, G. and Thurlimann, B.(1958) On Inelastic Buckling in Steel, Journal of the Engineering Mechanics Division, ASCE, Vol. 84, No. EM2, Proc. Paper 1581
  12. Hancock, G. J.(1981) Interaction Buckling in I-Section Columns, Journal of the Structural Division, ASCE, Vol. 107, ST1, January, pp.165-179
  13. Krieg, R. D.(1975) A Practical Two Surface Plasticity Theory, Journal of Applied Mechanics, Vol. 97, September, pp.641-646
  14. Orbison, J.G., McGuire, W. and Abel, J.F.(1982) Yield Surface Applications in Nonlinear Steel Frame Analysis, Computer Methods in Applied Mechanics and Engineering, Vol. 33, pp.557-573 https://doi.org/10.1016/0045-7825(82)90122-0
  15. Phillips, A. and Sierakowski, R. L.(1965) On the Concept of the Yield Surface, Acta Mehanica, Vol. 1, pp.29-35 https://doi.org/10.1007/BF01270502
  16. Sharp, M. L.(1970) Strength of Beams or Columns with Buckled Elements, Journal of the Sructural Division, ASCE, Vol. 96, No. ST5, May, pp.1011 -1015
  17. Stowell, E. Z.(1958) A Unified Theory of Plastic Buckling of Columns and Plates, NACA TN No. 1556
  18. Timoshenko, S. P. and Gere, J. N.(1961) Theory of Elastic Stability, McGraw-Hill Book Co.
  19. Tseng, N. T. and Lee, G. C.(1983) Simple Plasticity Model of Two-Surface Type, Journal of Engineering Mechanics, ASCE, Vol. 109, No. 3, June
  20. Yang, C. F., Lee, E. T., Chang, K. C., Lee, G. C.(1995) Inelastic Behavior of Steel Members under Nonproportional Loading, Journal of Engineering Mechanics, ASCE, Vol. 121, No. 1, January, pp.131-141 https://doi.org/10.1061/(ASCE)0733-9399(1995)121:1(131)