Journal of the Korean Society of Propulsion Engineers (한국추진공학회지)
- Volume 9 Issue 3
- /
- Pages.92-100
- /
- 2005
- /
- 1226-6027(pISSN)
- /
- 2288-4548(eISSN)
Cooling Performance Enhancement of a Rocket Engine Injector Face Plate
로켓엔진 분사면의 냉각성능 향상
- Published : 2005.09.01
Abstract
An optimal fuel manifold is suggested to improve the cooling performance of an injector face plate. The cooling performance at the center area of the injector face plate is to be augmented while the spatial injection uniformity is maintained. The comparison of the cooling performance of f candidates gives the conclusion that the dividing plate from 2-3 injector .ow to 9-10 injector. row is an optimal. The maximum face plate temperature decreases by 27
로켓엔진 연소기의 분사면 냉각성능을 개선하기 위한 연료 매니폴드의 최적형상을 제시하였다. 매니폴드의 형상은 분사균일성을 최대한 유지하면서 분사면 중심의 냉각성능을 높일 수 있어야 한다. 이를 위하여 7가지 후보 형상에 대하여 냉각성능을 비교한 결과 분사기 2-3열과 9-10열 사이에 분리판이 설치된 형상이 최적인 것으로 판단되었다. 분사균일성은 설계원형과 유사한 수준이며 분사면의 최고온도는 27
Keywords