DOI QR코드

DOI QR Code

CL면 변형 방법을 이용한 균일한 조도의 공구 경로 생성

Uniform Scallop Height Tool Path Generation Using CL Surface Deformation

  • 양민양 (한국과학기술원 기계공학과) ;
  • 김수진 (한국과학기술원 대학원 기계공학과)
  • 발행 : 2005.06.01

초록

In this paper, we present a cutter location (CL) surface deformation approach for constant scallop height tool path generation from triangular mesh. The triangular mesh model of the stereo lithography (STL) format is offset to the CL surface and then deformed in accordance with the deformation vectors, which are computed by the slope and the curvature of the CL surface. In addition, the tool path which is computed by slicing the deformed CL surface is inversely deformed by those same deformation vectors to a tool path with a constant scallop height. The proposed method is implemented, and a tool path generated by the proposed method is tested by simulation and by numerical control (NC) machining. The scallop height was found to be constant over the entire machined surface, demonstrating much better quality than that of mesh slicing, under the same constraints for machining time.

키워드

참고문헌

  1. Au, C.K., 2001, 'A Path Interval Generation Algorithm in Sculptured Object Machining,' The International Journal of Advanced Manufacturing Technology, 17, pp. 558-561 https://doi.org/10.1007/s001700170138
  2. Chen, T. and Ye, P., 2002, 'A Tool Path Generation Strategy for Sculptured Surfaces Machining,' Journal of Materials Processing Technology, 127(3), pp. 369-373 https://doi.org/10.1016/S0924-0136(02)00408-9
  3. Ding, S., Mannan, M.A., Poo, A.N., Yang, D.C.H. and Han, Z., 2003, 'Adaptive Iso-Planar Tool Path Generation for Machining of Free-Form Surfaces,' Computer-Aided Design, 35(2), pp. 141-153 https://doi.org/10.1016/S0010-4485(02)00048-9
  4. Suresh, K. and Yang, D.C.H., 1994, 'Constant Scallop-Height Machining of Free-Form Surfaces,' ASME, Journal of Engineering for Industry, 116, pp. 253-259 https://doi.org/10.1115/1.2901938
  5. Lin, R.S. and Koren, Y., 1996, 'Efficient Tool-Path Planning for Machining Free-Form Surfaces,' ASME, Journal of Engineering for Industry, 118, pp. 20-28 https://doi.org/10.1115/1.2803642
  6. Sarama, R. and Dutta, D., 1997, 'The Geometry and Generation of NC Tool Paths,' ASME, Journal of Mechanical Design, 119, pp. 253-258 https://doi.org/10.1115/1.2826244
  7. Choi, B.K., Lee, C.S., Hwang, J.S. and Jun, C.S., 1988, 'Compound Surface Modeling and Machining,' Computer-Aided Design, 20, pp. 127-136 https://doi.org/10.1016/0010-4485(88)90020-6
  8. Feng, H.Y. and Su, N., 2000, 'Integrated tool path and Feed Rate Optimization for the Finishing Machining of 3D Plane Surfaces,' International Journal of Machine Tools & Manufacturing, 40, pp. 1557-1572 https://doi.org/10.1016/S0890-6955(00)00025-0
  9. Tournier, C. and Due, E., 2002, 'A Surface Based Approach for Constant Scallop Height Tool-Path Generation,' The International Journal of Advanced Manufacturing Technology, 19, pp. 318-324 https://doi.org/10.1007/s001700200019
  10. Lee, S.G and Yang, S.H., 2002, 'CNC Tool-Path Planning for High-Speed High-Resolution Machining Using a New Tool-Path Calculation Algorithm,' The International Journal of Advanced Manufacturing Technology, 20, pp. 326-333 https://doi.org/10.1007/s001700200159
  11. Feng, H.Y. and Li, H.W., 2002, 'Constant Scallop-Height Tool Path Generation for Three-Axis Sculptured Surface Machining,' Computer-Aided Design, 34 pp. 647-645 https://doi.org/10.1016/S0010-4485(01)00136-1
  12. Lee, E.K., 2003, 'Contour Offset Approach to Spiral Toolpath Generation with Constant Scallop Height,' Computer-Aided Design, 35, pp. 511-518 https://doi.org/10.1016/S0010-4485(01)00185-3
  13. Koo, T.H. and Jee, S.C., 2003, 'Real-Time Tool-Path Generation for 3-Axis CNC Machining of NURBS Surfaces,' Transaction of KSME(A), No. 27, Vol. 8, pp. 1418-1425 https://doi.org/10.3795/KSME-A.2003.27.8.1418
  14. Jun, C.S., Kim, D.S. and Park, S.H., 2002, 'A New Curve-Based Approach to Triangle Machining,' Computer-Aided Design, 34(5), pp. 379-389 https://doi.org/10.1016/S0010-4485(01)00110-5
  15. Park, S.C., 2004, 'Sculptured Surface Machining Using Triangular Mesh Slicing,' Computer-Aided Design, 36(3), pp. 279-288 https://doi.org/10.1016/S0010-4485(03)00114-3
  16. Koc, B.H. and Lee, Y.S., 2002, 'Non-Uniform Offsetting and Hollowing Objects by Using Biarcs Fitting for Rapid Prototyping Process,' Computers in Industry, 47, pp. 1-23 https://doi.org/10.1016/S0166-3615(01)00141-5
  17. Qu, X.Z. and Stucker, B., 2003, 'A 3D Surface Offset Method for STL-Format Models,' Rapid Prototyping Journal, 9(3), pp. 133-141 https://doi.org/10.1108/13552540310477436
  18. Kim, S.J., Lee, D.Y. and Yang, M.Y., 2004, 'Offset Triangular Mesh Using the Multiple Normal Vectors of a Vertex,' Computer-Aided Design and Applications, 1(1-4), pp. 285-292 https://doi.org/10.1080/16864360.2004.10738269