• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.127-128
• /
• 2006

We introduce a novel approach for generating constant scallop height tool paths. We derive a Riemannian metric tensor from curvature tensors of a part surface and a tool surface. Then, we construct geodesic parallels from the newly constructed metric. Those geodesic parallels constitute an asymptotically-correct family of constant scallop height tool paths.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.6 s.237
• /
• pp.895-903
• /
• 2005

In this paper, we present a cutter location (CL) surface deformation approach for constant scallop height tool path generation from triangular mesh. The triangular mesh model of the stereo lithography (STL) format is offset to the CL surface and then deformed in accordance with the deformation vectors, which are computed by the slope and the curvature of the CL surface. In addition, the tool path which is computed by slicing the deformed CL surface is inversely deformed by those same deformation vectors to a tool path with a constant scallop height. The proposed method is implemented, and a tool path generated by the proposed method is tested by simulation and by numerical control (NC) machining. The scallop height was found to be constant over the entire machined surface, demonstrating much better quality than that of mesh slicing, under the same constraints for machining time.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.467-468
• /
• 2006

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.154-157
• /
• 2003

This paper presents an efficient real-time tool-path planning method for interpolation of NURBS surfaces in CNC machining. The proposed tool-path planning method is based on an improved iso-scallop strategy and can provide better precision than the existing methods. The proposed method is designed such that tool-path planning is easily managed in realtime. It proposed a new algorithm, for regulation of a scallop height, which can efficiently generate tool-paths and can save machining time compared with the existing method. Through computer simulations, the performance of the proposed method is analyzed and compared with the existing method in terms of feedrate. total machining time and a degree of constraint on the scallop height.

• The Korean Journal of Malacology
• /
• v.23 no.1
• /
• pp.9-16
• /
• 2007

Data obtained from field observation revealed that the degree of shell bioerosion of the scallop, Patinopecten (Mizuhopecten) yessoensis, by endolithic organisms significantly higher on the muddy sand than on the sand. At the area studied, the polychaete worm, Polydora brevipalpa (=Polydora ciliata brevipalpa, Polydora ciliata Okuda, Not Johnston, Polydora variegata), which is common symbiotic species for the scallop made 95-100% of total scallop shell bioerosion at the area studied. The muddy bottom sediments enriched by organic matter create favourable conditions for development of microphytobenthos and bacteria, which are predominantly consumed by P. brevipalpa. Linear regressions for the degree of shell bioerosion on the scallop shell height, total wet weight and adductor muscle wet weight revealed negative relationships between them for the scallops inhabiting both sand and muddy sand. The influence of polychaetes on scallops is complex. They may be food competitors. Polychaete can directly affect the host through their boreholes. Scallop expends energy for shell regeneration to prevent the polychaete penetration into its interior cavity. It was found that the degree of shell bioerosion increased considerably with scallop age.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1418-1425
• /
• 2003

In CAD systems, a surface to be machined is expressed by a series of curves, such as B-spline, Bezier and NURBS curves, which compose the surface and then in CAM systems the curves are divided into a large number of line or arc segments. These divided movement commands, however, cause many problems including their excessive size of NC data that makes almost impossible local adjustment or modification of the surface. To cope with those problems, the necessity of real-time curve or surface interpolators was embossed. This paper presents an efficient real-time tool-path generation method fur interpolation of NURBS surfaces in CNC machining. The proposed tool-path generation method is based on an improved iso-scallop strategy and can provide better precision than the existing methods. The proposed method is designed such that tool-path planning is easily managed in real-time. It proposed a new algorithm for regulation of a scallop height, which can efficiently generate tool-paths and can save machining time compared with the existing method. Through computer simulations, the performance of the proposed method is analyzed and compared with the existing method in terms of federate, total machining time and a degree of constraint on the scallop height.

• International Journal of Korean Welding Society
• /
• v.1 no.1
• /
• pp.51-57
• /
• 2001

Effect of the joint details on the stress distribution over a slot structure has been studied in order to improve its fatigue life using a finite element analysis. The joint details of interest are the radius and height of scallop at the stiffener as well as the mis-alignment between the stiffener and longitudinal member. For a slot structure currently used, the stiffener heel is subjected to the maximum stress for a given external load, where is a potential fatigue crack initiation site. The stresses at the stiffener heel and toe decrease both by increasing the scallop radius and more significantly by increasing the mis-alignment while no notable effect of the scallop height on it is appreciated. A proper combination of these factors makes it possible to reduce the stresses at the stiffener heel and In, theoretically, more than 50%. This is attributed to the modification of the stress distribution over the slot structure including the transition of the maximum stressed region from the stiffener heel to the slot surface of the transverse web. Such then results in a g[eat improvement of the fatigue life of the slot structure.

• The Korean Journal of Malacology
• /
• v.28 no.1
• /
• pp.1-6
• /
• 2012

We studied that the effect of stocking density on growth and survival rate of the scallop, Chlamys farreri (initial shell height 32.97 mm and total weight 5.63 g) from June 2002 to October 2003 in the west coast of Korea. C. farreri is usually the west coast of Korea and northern China in the natural habitat of the coastal species. Range of surface water temperature in the study area was $4.3^{\circ}C$ to $25.3^{\circ}C$, salinity 29.2 psu to 32.1 psu, dissolved oxygen 5.32 mg/L to 7.51 mg/L and pH was 7.84 to 8.12, respectively. The stocking densities were 20, 30, 40 and 50 individuals per a compartment of suspension cage in culture beginning. After 16 months from initiation, ranges of shell height and mean total weight were from 64.35 mm to 76.23 mm and from 41.53 g to 64.85 g. The survival rate was from 82% to 100%. The growth rate of the scallop was negatively correlated with the stocking density. The growth of the shell height and total weight were decreased with decreasing of water temperature. Most of mortality of scallop occurred during March to April and September to October. Survival rate in the stocking density was decreased by density increase and was highest in 20 individual a compartment.

• Journal of Aquaculture
• /
• v.15 no.1
• /
• pp.61-68
• /
• 2002

A comparative study on the effect of rearing depths at 2 (surface) and 5 (bottom) m on growth of the scallop was undertaken in Nam-myeon coastal area during June to December, 1997. There were very little difference in the levels of temperature (12.2 ~24.5$^{\circ}C$), salinity (27.3 ~33.1$\textperthousand) and dissolved oxygen (>7.05 mg/l) at a given month. But the chlorophyll level fluctuated between 1.2 and 11.0 $\mu g/l$ at the surface but below 2 $\mu g/l$ at the bosom. Highest phytoplankton density occurred in August and Ceratium dominated it during the period from June to October. Mean growth of the bay scallop at surface and bottom for the six months rearing period was as follows; 0.19 and 0.16 mm/day for shell height, and 0.16 and 0.12 g/day for total weight. Maximum predicted values of shell height calculated by von Bertalanffy growth model were 52.62 mm for the surface and 46.73 mm for the bottom reared scallop. Survival of the scallop was higher (80 %) for the surface group than that at the bottom (60%).

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.4 s.97
• /
• pp.129-137
• /
• 1999

A parametric curve interpolator has been proposed for machining curves instead of a linear interpolator in which curves are approximated by a set of line segment. The parametric curve interpolator is superior to linear interpolator in machining time and contour error and generate exact position commands directly from curve equations. In this paper, a new toolpath generation method is proposed based on the parametric curve interpolator. This method retains all the benefits of parametric curve interpolator and can bound the scallop height within a specified value. By interpolating curves and surfaces directly from the mathematical equations, the amount of data from CAD/CAM system to CNC controller can be significantly reduced. The proposed method was implemented on a CNC controller and was confirmed to give a better result than the other existing method.