열전형 전압변환기의 모델링 및 교류-직류 변환 차이 계산 프로그램 개발

Modeling of a Thermal Voltage Converter and Development of AC-DC Transfer Difference Calculation Program

  • 이정남 (국립 한밭대학교 정보통신전문대학원) ;
  • 권성원 (한국표준과학연구원 전자기표준부) ;
  • 정재갑 (한국표준과학연구원 전자기표준부) ;
  • 이효경 (국립 한밭대학교 정보통신전문대학원) ;
  • 박종권 (국립 한밭대학교 정보통신컴퓨터공학부 전파공학전공)
  • Lee Jung-Nam (Graduate School of Informationn & Communications, Hanbat National University) ;
  • Kwon Sung-Won (Division of Electromagnetic Metrology, Korea Research Institute of Standards and Science) ;
  • Jung Jae-Kap (Division of Electromagnetic Metrology, Korea Research Institute of Standards and Science) ;
  • Lee Hyo-Kyoung (Graduate School of Informationn & Communications, Hanbat National University) ;
  • Park Jong-Kweon (Department of Radio Wave Engineering, Hanbat National University)
  • 발행 : 2005.05.01

초록

본 논문에서는 손실이 있는 전송선로의 전달 임피던스를 적용한 열전형 전압 변환기(TVC)의 모델을 제안하였으며, TVC의 교류-직류 변환 차이를 계산하기 위한 프로그램을 개발하였다. 제안된 TVC는 열전소자(TE)와 열전소자의 측정범위를 확대하기 위한 저항선이 동축형 실린더의 중심에 직선형태로 직렬로 연결되었다. 제안된 TVC의 교류-직류 변환 차이를 실린더의 직경, 열전도도 등의 특성을 적용하여 시뮬레이션 하였다. 시뮬레이션 값이 불확도 이내에서 측정값과 잘 일치하였다. 일치도는 주파수 $40Hz\~10kHz$에서는 $1{\mu}V/V$이하였고, $20kHz\~100kHz$에서는 $5{\mu}V/V$이하였으며, $200kHz\~1MHz$에서는 최대 $12{\mu}V/V$이하의 차이를 보였다.

We have proposed a model of a thermal voltage converter(TVC) using the trans-impedance of lossy transmission line and developed a calculation program for ac-dc transfer difference of the TVC. The proposed TVC consists of a thermo-element(f) and a range resistor wire connected in series at the center of coaxial cylinder. The range resistor wire is used to extend the measurement range of the n. The calculated ac-dc transfer differences of the proposed TVC by simulation agree well with the measured values within the uncertainties. The simulated and measured values are agreed within $1{\mu}V/V$ from 40 Hz to 10kHz, within $5{\mu}V/V$ from 20kHz to 100MHz, and within $12{\mu}V/V$ from 200kHz to 1 MHz.

키워드

참고문헌

  1. M. Klonz, 'Current development developments in accurate ac-dc transfer measurements', IEEE IM, vol. 44, no. 2, pp. 363-366, 1995
  2. B. D. Inglish, 'Standards for ac-dc transfer', Metrologia, vol. 29, no. 2, pp.191-199, 1992 https://doi.org/10.1088/0026-1394/29/2/007
  3. B. D. Inglish, 'AC-DC transfer standards-present status and future directions', IEEE IM, vol. 34, no. 2, pp. 285-290, 1985
  4. F. L. Hermach, E. S. Williams, 'Thermal voltage converters for accurate voltage measurements to 30 megacycles per second', AIEE Transaction Pt I (Communication and Electronics), vol. 79, pp. 1-6, 1960
  5. M. Nomair, K. J. P. M. Harmans, 'High accuracy calculable ac-dc transfer standards for the LF-30 MHz frequency range', IEEE IM, vol. 38, no. 2, pp. 342-345, 1989
  6. J. Kinard, T. Cai, 'Determination of ac-dc difference in the range 0.1-100 MHz frequency range', IEEE IM, vol. 38, no. 2, pp. 360-367, 1989
  7. C. J. van Mullem, W. J. G. D. Janssen, and J. P. M. de Vreede, 'Evaluation of the calculable high frequency AC-DC standard', IEEE IM, vol. 46, no. 2, pp. 361-364, 1997
  8. P. S. Filipski, R F. Clark, and D. C. Paulusse, 'Evaluation of low frequency AC-DC difference of coaxially mounted TVC', IEEE IM, vol. 47, no. 1, pp. 81-86, 1998
  9. I. Budovsky, B. D. Inglish, 'High frequency ac-dc difference of NML single-junction thermal voltage converters', IEEE IM, vol. 50, no. 1, pp. 360-367, 2001
  10. R A. Schipman, Transmission Lines, Schaum series, McGraw-Hili Book Company, 1968