DOI QR코드

DOI QR Code

Optimal Placement of Strain Gauge for Vibration Measurement for Fan Blade

블레이드 진동측정을 위한 스트레인 게이지 설치위치 최적화

  • 최병근 (경상대학교 기계항공공학부 해양산업연구소)
  • Published : 2004.03.01

Abstract

A multi-step optimum strategy for the selection of the locations and directions of strain gauges is proposed in this paper to capture at best the modal response of blade in a series of modes on fan blades. It is consist of three steps including two pass reduction step, genetic algorithm and fine optimization to find the locations-directions of strain gauges. The optimization is based upon the maximum signal-to-noise ratio(SNR) of measured strain values with respect to the inherent system measurement noise, the mispositioning of the gauge in location and gauge failure. Optimal gauge positions for a fan blade is analyzed to prove the effectiveness of the multi-step optimum methodology and to investigate the effects of the considering parameters such as the mispositioning level, the probability of gauge failure, and the number of gauges on the optimal strain gauge position.

Keywords

References

  1. Yang, M. T. and Griffin, J. H., 1988, 'Theory and Methodology of Optimally Measuring Vibratory Strains in Closely Spaced Modes,' Journal of Engineering for Gas Turbines and Power, Vol. 120, No. 4, pp. 801-807 https://doi.org/10.1115/1.2818471
  2. Sensmeier, M. D. and Nichol, K. L., 1998, 'Optimum Placement of Sensors for Vibration Measurements of Turbine Engin Blades,' Proceedings of the 39th AIAA/ASME/ASCE/AHS/ ASC Structures, Structural Dynamics, and Materials Conference, Long Beach. AIAA Paper 98-1849. CA
  3. Sensmeier, M. D. and Nichol K. L., 2000, 'Improved Vibration Monitoring Through Optimi- zation of Sensor Placements,' The International Gas Turbine & Aeroengine Congress and Exposition, Munich. ASME Paper 2000-GT-612. Germany
  4. 최병근, 최창림, 양보석, 2004, '진동측정을 위한 스트레인게이지 설치위치 최적화: 최적화 방법 및 평가,' 한국소음진동공학논문집, 제14권, 제8호, pp. 757-766
  5. Mignolet, M. P. and Choi, B. K., 2002, 'Rubust Optimal Positioning of Strain gauges on Blades.' Turbo Expo 2002. Amsterdam, The Netherlands, Jun. 3-6, Paper 2002-GT-30454
  6. 최병근, 이현섭, 양보석, Mignolet, M. P., 2002, 'Position Optimization of Strain gauge on Blades,' 한국소음진동공학회 추계학술대회논문집
  7. Gen, M. and Cheng, R., 1997, Genentic Algorithms and Engineering Design, Wiley-interscience, New York, NY
  8. Goldberg, D. E., 1989, Genetic Algorithms in Search, Optimization & Machine Learning, Addi- sion Wesley, New York, NY
  9. Choi, B. K., Lentz, J., Rivas-Guerra, A. J. and Mignolet, M. P., 2003, 'Optimization of Intentional Mistuning Patterns for the Reduction of the Forced Response Effects of Unintentional Mistuning: Formulation and Assessment,' Journal of Engineering for Gas Turbine and Power, Vol. 125, No. 1, pp. 131-140 https://doi.org/10.1115/1.1498270
  10. Petrov, E. P., Vitali, R. and Haftka, R., 2000, 'Optimization of Mistuned Bladed Discs Using Gradient-based Response Surface Approxi- mations,' Proc. 41st AIAA/ASME/ASCE/AHS/ ASC Structures, Structural Dynamics and Ma- terials Conference and Exhibit, Atlanta, GA, Apr., Paper AIAA-2000-152