DOI QR코드

DOI QR Code

Developed Inherent Strain Method Considering Phase Transformation of Mild Steel in Line Heating

선상가열시 강의 상변태를 고려한 개선된 고유변형도 기반의 등가하중법

  • 하윤석 (서울대학교 대학원 조선해양공학과) ;
  • 장창두 (서울대학교 조선해양공학과)
  • Published : 2004.12.01

Abstract

The inherent strain method is known to be very efficient in predicting the deformation of steel plate by line heating. However, in the actual line heating process in shipyard, the rapid quenching changes the phase of steel. In this study, In order to consider additional effects under phase transformation, inherent strain regions were assumed to expand. Also, when calculating inherent strain, material properties of steel in heating and cooling are applied differently considering phase transformation. In this process, a new method which can reflect thermal volume expansion of martensite is suggested.8y the suggested method, it was possible to predict the plate deformations by line heating more precisely.

Keywords

References

  1. 고대은, 장창두, 서승일, 이해우, 1999, '곡가공 자동화 시스템을 위한 선상가열에 의한 변형의 실시간 시뮬레이션,' 대한조선학회 논문집, 제36권, 제 4호, pp. 116-127
  2. 장경복, 2001, 마르텐사이트 변태를 고려한 용접 잔류응력 및 아크-스폿 용접 구조물의 정밀용접 열변형 해석, 부산대학교 공학박사 학위논문
  3. 장창두, 고대은, 김병일, 박정웅, 2001(a), '열간가공에 의한 판의 변형특성에 관한 실험적 연구,' 대한조선학회 논문집, 제 38권, 제 2호, pp. 62-70
  4. 장창두, 고대은, 문성춘, 서용록, 2001(b), '삼각가열에 의한 판 변형의 시뮬레이션,' 대한조선학회 논문집, 제 38권, 제 4호, pp. 66-74
  5. 장창두, 서승일, 고대은, 1997, '간이 열탄소성 해석을 이용한 선상가열에 의한 판의 변형 예측에 관한 연구,' 대한조선학회 논문집, 제 34권, 제 3호, pp. 104-112
  6. 장창두, 이창현, 2000, '선체 블록의 용접변형예측 및 제어를 위한 연구,' 대한조선학회 논문집, 제 37권, 제 2호, pp. 127-136
  7. 장창두, 하윤석, 고대은, 문성춘, 2002, '선상가열 판변형 해석을 위한 고유변형도 영역의 결정법,' 대한조선학회 논문집, 제 39권, 제 1호, pp. 82-89
  8. Andrews, K. W., 1965, 'Empirical Formulae for the Calculation of Some transformation Temperatures,' JISI, Vol. 203, pp. 721-727
  9. ASM International, 1993, ASM Handbook (v.4. Heat treating), The Materials Information Society
  10. ASTM Designation, 1963, Estimating the Average Grain Size of Metals, American Society for testing and Materials, Philadelphia, E 112-63
  11. Itsuo O. and Takao A., 1987, Fusion and Solidification/ Removal Processing, Corona Publishing
  12. Koistinen, D. P. and Marburger, R. E., 1959, 'A General Equation Prescribing the Extent of the Austenite-Martensite Transformation in Pure Iron-Carbon Alloys and Plain Carbon Steels,' Acta Met, Vol 7, pp. 59-60
  13. Marder AR and Krauss G., 1967, 'The Morphology of Martensite in Iron Carbon Alloys' Trans ASM 60:651-660
  14. Marder AR and Krauss G., 1970, 'The Effects of Morphology on the strength of Lath Martensite', Proc of Second Int Conf on the Strength of Metals and Alloys, Vol III, American Society for Metals, Metals Park, Oh pp 822-823
  15. Melloy, G. F., 1968, Austenite Grain Size Its Control and Effects, Metals Engineering Institute, American Society for Metals, Metals Park, Oh
  16. Payson, P. and Savage, C. H., 1944, 'Martensite Reactions in Alloy Steels,' Trans ASM, Vol 33, pp. 261-275
  17. Satoh, K., Matsui, S., Terai, K. and Iwamura, Y., 1969, 'Water-cooling Effect on Angular Distortion caused by the Process of Line Heating in Steel Plates,' J. of the Society of Naval Architects of Japan, Vol. 126, pp. 445-458
  18. Satoh, K. and Terasaki, T., 1976, 'Effect of Welding Conditions on Welding Deformations in Welded Structure Materials,' J. of the Japanese Welding Society, Vol. 45, No. 4. pp. 302-308 https://doi.org/10.2207/qjjws1943.45.302
  19. Swarr, T. E. and Krauss, G., 1976, 'The Effect of Structure on the Deformation of As-Quenched and Tempered Martensite in an Fe-O.2% C Alloy,' Met Trans A, Vol 7A, pp. 41-48
  20. Wayman, C. M., 1964, Introduction to the Crystallography of Martensite Transformations, Macmillan, New York

Cited by

  1. Development of Thermal Distortion Analysis Method on Large Shell Structure Using Inherent Strain as Boundary Condition vol.45, pp.1, 2008, https://doi.org/10.3744/SNAK.2008.45.1.93
  2. Analytical Methodology Obtaining an Optimal Welding Sequence for Least Distortion of Welded Structure vol.31, pp.3, 2013, https://doi.org/10.5781/KWJS.2013.31.3.54
  3. Prediction Technology of Reverse Setting Block Shape with Inherent Strain Method and Re-meshing Technology vol.31, pp.6, 2017, https://doi.org/10.26748/KSOE.2017.12.31.6.425