DOI QR코드

DOI QR Code

Noise Source Identification of a Car A/V System

차량탑재용 A/Y 시스템의 소음원 규명

  • 홍종호 (서울대학교 대학원 기계항공공학부) ;
  • 이상호 (현대모비스 카트로닉스 오디오연구부) ;
  • 강연준 (서울대학교 기계항공공학부)
  • Published : 2004.10.01

Abstract

This paper presents the noise source identification of a car A/V system. There are two different kinds of noise sources noise generated by loading mechanism and rattle noise by externally forced vibration. A dynamometer has been made to produce stationary inertia to the loading mechanism of A/V system. Sound pressure spectra and sound intensity were measured by operating the dynamometer setup as various motor speeds, and the results were analyzed. A dominant rattle noise source about A/V system's components has been found by multi-dimensional spectral analysis. Residual spectrum method was applied for eliminating coherence between the vibration sources. In result, the dominant rattle noise source was identified by partial coherent output spectrum of individual vibration component.

Keywords

References

  1. Random Data : Analysis and Measurement Procedures Bendat, J. S.
  2. Engineering Application of Correlation and Spectral Analysis Bendat, J. S.
  3. J. Acoust. Soc. Am. v.68 no.2 Modern Analysis Procedures for Multiple Input/output Problems Bendat, J. S.
  4. J. Acoust. Soc. Am. v.74 no.3 On the Application of Coherence Techniques for Source Identification in a Multi-Noise Source Environment Wang, M. E.;Crocker, M. J. https://doi.org/10.1121/1.389873
  5. 대한기계학회논문집 v.9 no.6 다차원 스펙트럼 해석에 의한 가솔린엔진의 진동원 검출에 관한 연구 강명순;오재응;서상현
  6. 한국소음진동공학회논문집 v.11 no.9 전동드릴의 진동특성 및 전파경로 해석 조윤수;김도현;최연선
  7. Plastic Gearing: Selection and Application Adams, C. E.
  8. 성형플라스틱 기어핸드북 한영수(외)
  9. Transactions of JSME Series C v.51 no.522 A Study on the Development of Low-Noise Gears Naohisa Tsukamoto;Hiroki Maruyama;Toru Ikuta
  10. Sound Intensity Fahy, F. J.
  11. 한국자동차공학회 춘계학술발표대회 논문집 차량 탑재용 A/V 시스템 구동부에서 발생하는 소음원 규명 홍종호;강연준(외)
  12. 한국소음진동공학회 추계학술발표대회논문집 차량용 A/V 시스템의 구동부 소음원과 래틀 소음원에 관한 연구 홍종호;강연준(외)