References
- Multiphase Science and Technology v.11 Phase separation at t junctions Azzopardi, B.J.
- Tansactions of the ASME, J. of Fluids Engineering v.118 Effect of branch orientation on annular two-phase flow on t-junctions Peng, F.;Shoukri, M.;Chan, A.M.C. https://doi.org/10.1115/1.2817496
- KSME Internation J. v.17 no.8 Two-phase flow distribution and phase separation through both horizontal and vertical branches Tae, S.J.;Cho, K. https://doi.org/10.1007/BF03016516
- Nuclear Engineering and Design v.64 The measurement of phase separation in Wyes and Tees Honan, T.J.;Lahey, Jr.R.T. https://doi.org/10.1016/0029-5493(81)90035-2
- ASME/JSME Thermal Engineering Conference v.2 Two-phase flow distribution in multipass tube modelling serpentine type evaporator Watanabe, M.;Katsuta, M.;Nagata, K.
- Flows American Society of Mechanical Engineerings, Fluids Engineering Division, FED v.225 Two-phase header flow distribution in a stacked plate heat exchanger, Gas Liquid Rong, X.;Kawaji, M.;Burgers, J.G.
- Transactions of the ASME, Journal of Fluids Engineering v.98 Flow distribution manifolds Bajura, R.A.;Jones, Jr.E.H. https://doi.org/10.1115/1.3448441
- Heat Transfer Engineering v.23 no.4 Single-phase pressure drop measurements in a microchannel heat exchanger Yin, J.M.;Bullard, C.W.;Hrnjak, P. https://doi.org/10.1080/01457630290090446
- 9th Int. Refrigeration and Air Conditioning Conference at Purdue. R6-4 Flow distribution and pressure drop in micro-channel manifolds Tompkins, M.D.;Yoo, T.;Hrnjak, P.;Newell, T.;Cho, K.
- First International Conference on Microchannels and Minichannels, ICMM2003-1063 Two-phase flow distribution in a compact heat exchanger header Kim, J.S.;Im, Y.B.;Kim, J.H.;Lee, K.T.
- Experimental Thermal and Fluid Science v.28 Distribution of two-phase flow at header-channel junctions Lee, J.K.;Lee, S.Y. https://doi.org/10.1016/S0894-1777(03)00042-6
- Int. J. Heat Mass Transfer. v.39 no.4 Friction pressure drop of R-12 in small hydraulic diameter extruded aluminum tubes with and without micro-fins Yang, C.Y.;Webb, R.L. https://doi.org/10.1016/0017-9310(95)00151-4
- Chem. Engng. Prog. Symp. Ser. v.55 Condensation heat transfer within horizontal tubes Akers, W.W.;Deans, H.A.;Crosser, O.K.
- Appl. Mech. Rev. v.53 no.7 Heat exchangers at micro- and meso-scale Mehendale, S.S.;Jacobi, A.M.;Shah, R.K. https://doi.org/10.1115/1.3097347
- ASME Conference, Cavitation and Multiphase Flow v.FED-21 Prediction of pressure drop during horizontal two-phase flow of pure and mixed refrigerants Souza, A.L.;Pimenta, M.M.
- Convective boiling and condensation Collier, J.G.;Thome, J.R.
- Transactions of the ASME, J. of Heat Transfer v.86 Estimation of steady-state steam void-fraction by means of the principle of minimum entropy production Zivi, S.M. https://doi.org/10.1115/1.3687113
- Transactions of the ASME, J. of Fluid Engineering v.107 Using uncertainty analysis in the planning of an experiment Moffat, R.J. https://doi.org/10.1115/1.3242452
- AERE-M 2159 Studies of two-phase flow patterns by simultaneous flash and X-ray photography Hewitt, G.F.;Roberts, D.N.
- AICHE Journal v.22 A model for predicting flow regime transitions in horizontal and near horizontal gas-liquid flow Taitel, Y.;Dukler, A.E. https://doi.org/10.1002/aic.690220105