Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Thermal Fatigue Reliability of Solder Joints in a Thin Film Optical Filter Device

박막 광학 필터 디바이스의 패키징시 솔더 조인트의 피로 신뢰성 해석

  • 이성철 (포항공과대학교 대학원) ;
  • 현충민 (포항공과대학교 대학) ;
  • 이형만 (광부품연구센터, 전자부품연구) ;
  • 김명진 (광부품연구센터, 전자부품연구) ;
  • 김회경 (광부품연구센터, 전자부품연구) ;
  • 김기태 (포항공과대학교 기계공학과)
  • Published : 2004.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Plastic and creep deformations of solder joints during thermal cycling are the main factors of misalignments and power losses in optical telecommunication components. Furthermore, the increased mismatch between solder Joint-bonded areas may cause severe failure in the components. Darveaux's creep model was implemented into a finite element program (ABAQUS) to simulate creep response of solder. Based on the finite element results, thermal fatigue reliability was predicted by using various fatigue life prediction models. Also, the effects of ramp conditions, dwelling time, and solder joint-embedding materials on the reliability were investigated under the thermal cycling conditions of the Telcordia schedule (-40∼75$^{\circ}C$).

Keywords

References

  1. Miller, K. A. W., Caras, B., Dean, B.A., Eltringham, T.F. and Ku, R.T., 1992, 'Qualification of a Robust Fiber Termination,' in Proc. 42nd Electronic Components and Technology Conf., pp. 867-869 https://doi.org/10.1109/ECTC.1992.204308
  2. Kruetzmann, G., 1990, 'The Solder Glass Sealing Technology for the Use in Packaging of Fiber Optic Sensors,' Proc. of SPIE., Vol. 1267, pp. 2-8 https://doi.org/10.1117/12.20283
  3. Itoh, M., Nagahori, T., Kohashi, H., Kaneko, H., Honmou, H., Watanabe, I., Uji, T. and Fujiwara, H., 1991, 'Compact Multi-Channel LED/PD Array Modules for Hundred Mb/s/ch Parallel Optical Transmission,' in Proc. 41st Electronic Components and Technology Conf., pp. 475-478 https://doi.org/10.1109/ECTC.1991.163918
  4. Uhlhorn, R., 1993, 'Fiber-Optic Interconnect and Component Packaging for the Next Generation of Aerospace Platforms,' in Proc. 43rd Electronic Components and Technology Conf., pp. 974-982 https://doi.org/10.1109/ECTC.1993.346735
  5. Kashyap, B. P., Murty, G. S., 1981, 'Experimental Constitutive Relations for High Temperature Deformation of a Pb/Sn Eutectic Alloy,' Mater. Sci. Eng., Vol. 50, pp. 205-213 https://doi.org/10.1016/0025-5416(81)90179-8
  6. Pao, Y. H., Badgley, J., Jih, E., Govila, R. and Browning, J., 1993, 'Constitutive Behavior and Low Cycle Thermal Fatigue of 97Sn-3Cu Solder Joints,' ASME J. of Electronic Packaging, Vol. 115, No. 2, pp. 147-152 https://doi.org/10.1115/1.2909310
  7. Darveaux, R. and Banerji, K., 1992, 'Constitutive Relations for Tin-Based Solder Joints,' IEEE Transactions on Components, Hybrids, Manufact. Technol., Vol. 15, No. 6, December, pp. 1013-1024 https://doi.org/10.1109/33.206925
  8. Shi, X. Q., Yang, Q. J., Wang, Z. P., Pang, H. L. J. and Zhou, W., 2000, 'Reliability Assessment of PBGA Solder Joints Using the New Creep Constitutive Relationship and Modified Energy-Based Life Prediction Model,' in 2000 Electronics Packaging Technology Conf., pp. 398-405 https://doi.org/10.1109/EPTC.2000.906407
  9. Pang, J. H. L., Chong, D. Y. R. and Low, T. H., 2001, 'Thermal Cycling Analysis of Flip-Chip Solder Joint Reliability,' IEEE Transactions on Components and Packaging Technologies, Vol. 24, No. 4, December https://doi.org/10.1109/6144.974964
  10. Darveaux, R. and Banerji, K., 1992, 'Constitutive Relations for Tin-Based Solder Joints,' IEEE Transactions on Components, Hybrids, Manufact. Technol., Vol. 15, No. 6, December https://doi.org/10.1109/33.206925
  11. Wong, B. Helling, D. and Clark, R. W., 1988, 'A creep-rupture model for two phase eutectic solders,' IEEE Trans. Comp. Hybrids, Manuf. Technol., vol. CHMT-11, pp. 305-325
  12. Clech, J. P. and Augis, J. A., 1988, 'Temperature cycling, structural response and attachment reliability of surface-mounted leaded packages,' in Proc. 1988 IEPS, Dallas, pp. 305-325, November
  13. Lau, J. H. and Pao, Y. H., 1997, 'Solder Joint Reliability of BGA, CSP, Flip Chip, and Fine Pitch SMT Assemblies,' McGraw-Hill, New York, pp. 112-123
  14. Pang, J. H. L., Seetoh, C. W. and Wang, Z. P., 2000, 'CBGA solder joint reliability evaluation based on elastic plastic creep analysis,' ASME J. Electron. Packag., September https://doi.org/10.1115/1.1286120
  15. Solomon, H. D., 1986, 'Fatigue of 60/40 Solder,' IEEE Trans. Comp., Hybrids, Manufact. Technol., vol. CHMT-9, December
  16. Knecht, S. and Fox, L., 1990, 'Constitutive Relation and Creep-Fatigue Life Model for Eutectic Tin-Lead Solder,' IEEE Trans. Comp., Hybrids, Manufact. Technol., vol. 13, No. 2, June https://doi.org/10.1109/33.56179
  17. Solomon, H. D., 1989, 'Low Cycle Fatigue of 60/40 Solder-Plastic Strain Limited vs. Displacement Limited Testing,' Electron. Packaging: Materials and Processes, pp. 29-47
  18. ABAQUS User Mannual, Ver. 6.2, 2001, Hibbitt, Karlsson and Sorensen
  19. Bellcore, 1999, 'GR-1221-CORE, Generic Reliability Assurance Requirements for Passive Optical Components,' Bellcore, Issue 2