References
- Penning, P., 1972, 'Mathematics of the Portevin LeChatelier Effect,' Acta Metallurgica, Vol. 22, pp. 1169-1175 https://doi.org/10.1016/0001-6160(72)90165-4
- Miller, A.K. and Sherby, O.D., 1978, 'A Simplified Phenomenological Model for Non-Elastic Deformation: Prediction of Pure Aluminum Behavior and Incorporation of Solute Strengthening Effects,' Acta Metallurgica, Vol. 26, pp. 289-304 https://doi.org/10.1016/0001-6160(78)90129-3
- Mulford, R.A. and Kocks, U.F., 1979, 'New Observation on the Mechanisms of Dynamic Strain Aging and of Jerky Flow,' Acta Metallurgica, Vol. 27, pp. 1125-1134 https://doi.org/10.1016/0001-6160(79)90130-5
- Kalk, A. and Schwink, CH., 1992, 'On Sequences of Alternate Stable and Unstable Regions Along Tensile Deformation Curves,' Physica Status Solidi, Vol. 172, pp. 133-144 https://doi.org/10.1002/pssb.2221720114
- Cottrell, A.H., 1953, 'A Note on the Portevin-LeChatelier Effect,' Philosophy Magazine, Vol. 44, pp. 829-832
- McCormick, P.G., 1972, 'A model for the Portevin-LeChatelier Effect in Substitutional Alloys,' Acta Metallurgica, Vol. 20, pp. 351-354 https://doi.org/10.1016/0001-6160(72)90028-4
- Kubin, L.P. and Estrin, Y., 1985, 'The Portevin-LeChatelier Effect in Deformation with Constant Stress Rate,' Acta Metallurgica, Vol. 33, pp. 397-407 https://doi.org/10.1016/0001-6160(85)90082-3
- Stout, M.G. and Follansbee, P.S., 1986, 'Strain Rate Sensitivity, Strain Hardening, and Yield Behavior of 304L Strainless Steel,' Journal of Engineering Materials and Technology, Vol. 108, pp. 344-353 https://doi.org/10.1115/1.3225893
- Clifton, R.J., 1990, 'High Strain Rate Behavior of Metals,' Applied Mechanics Review, Vol. 43, pp. S9-S22 https://doi.org/10.1115/1.3120862
- Bodner, S.R. and Rubin, M.B., 1994, 'Modeling of Hardening at Very High Strain Rates,' Journal of Applied Physics, Vol. 76, pp. 2742-2747 https://doi.org/10.1063/1.357578
- Krausz, A. S. and Krausz, K., 1996, 'Unified Constitutive Laws of Plastic Deformation,' Academic Press, San Diego
- Krempl, E. and Ho, K., 2000, 'An Overstress Model for Solid Polymer Deformation Behavior Applied to Nylon 66,' Time Dependent and Nonlinear Effects in Polymers and Composites, ASTM STP 1357, American Society for Testing and Materials, pp. 118-137
- Krempl, E. and Ho, K., 2001, 'The Overstress Model Applied to Normal and Pathological Behavior of Some Engineering Alloys,' IUTAM Symposium on Creep in Structures, S. Murakami and N. Ohno Editors, Kluwer Academic Publishers, pp. 361-373
- Kwangsoo Ho, 2002, 'A Generalized Viscoplasticity Theory Based on Overstress,' Trans. of the KSME(A), Vol. 26, No. 10, pp. 1953-1960
- Ho, K. and Krempl, E., 2000, 'Modeling of Positive, Negative and Zero Rate Sensitivity by Using the Viscoplasticity Theory Based on Overstress (VBO),' Mechanics of Time-Dependent Materials, Vol. 4, pp. 21-42 https://doi.org/10.1023/A:1009850608336
- Ho, K. and Krempl, E., 2002, 'Extension of the Viscoplasticity Theory Based on Overstress (VBO) to Capture Non-Standard Rate Dependence in Solids,' International Journal of Plasticity, Vol. 18, pp. 851-872 https://doi.org/10.1016/S0749-6419(01)00011-0
- Swearengen, J.C., Lowe, T.C. and Lipkin, J., 1985, 'Constitutive Equations for Rate-Dependent Plasticity,' Annual Review of Materials Science, Vol. 15, pp. 249-270 https://doi.org/10.1146/annurev.ms.15.080185.001341
- Freed, A.D., Chaboche, J.-L. and Walker, K.P., 1991, 'On the Thermodynamics of Stress Rate in the Evolution of Back Stress in Viscoplasticity,' NASA TM-103794