대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제28권5호
  • /
  • Pages.593-602
  • /
  • 2004
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

제어봉 구동장치 제어기기 설계 및 검증에 관한 연구

Study of Design and Verification for Control Rod Control System

  • 발행 : 2004.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

We have developed a digital control rod control system not only to improve its performance but also to improve its reliability and speed of response so that it can replace the old fashioned analog system. However, a new developed digital control system should be tested to prove the validity by using any prototype or mock-up before application. The reliability prediction and the reliability block diagram analysis methods were adopted to verify the reliability of the developed hardware. For the case of software, especially fur a new developed control algorithm it has been tested to prove performances and validation by using a dynamic simulator and mock-up of control rod drive mechanism altogether. Here we want to present some key factors regarding to the new developed digital system with some verification procedures.

키워드

참고문헌

  1. Kwon, K. C., Song, S. J., Park, W. M. and Lyu, S. P., 1999, 'The Real-Time Functional Test Facility for Advanced Instrumentation and Control in Nuclear Power Plants,' IEEE Transactions on Nuclear Science, Vol. 46, No. 2, pp. 92-99 https://doi.org/10.1109/23.757194
  2. EPRI, 1990, 'Advanced Light Water Reactor Requirements Document,' pp. 200-225
  3. Edwards, R. M., Lee, K. Y. and Hughes, D. E., 1996, 'Tested for Nuclear Plant Instrumentation and Control Validation,' in Proc. American Nuclear Society Int. Topical Meeting on Nuclear Plant Instrumentation, Control and Human Machine Interface Technologies, University Park, PA, USA, May 6-9, pp. 287-294
  4. IEEE, 1987, 'IEEE Guide for general Principles of Reliability Analysis of Nucler Power Generating Station Safety System,' ANSI/IEEE Std. 352
  5. Department of Defense, 1995, 'Reliability Prediction of Electronic Equipment,' MIL-HDBK-217F
  6. Isograph, 2001, 'Reference Manual of Reliability Workbench,' pp. 337-347
  7. Otaduy, P. J., Brittain, C. R., Rovere, L. A. and Gove,N. B., 1991, 'Supervisory Control: Conceptual Design and Testing in ORNL's Advanced Controls Research Facility,' in Proc. AI91: Frontiers in Innovative Computing for the Nuclear Industry, Jackson, WY, USA, Sept. 15-18, pp. 170-179
  8. Carcia, H. E., Vilim, R. B. and Dean, E. M., 1997, 'Hierarchical Control of Reactor Inlet Temperature in Pool Type Plants-II : Implementation and Results,' Nucl. Sci. Eng., Nucl. Sci. Eng., Vol. 125, pp. 337-347 https://doi.org/10.13182/NSE97-A24279
  9. UHRIC, R. E., 1989, 'Opportunities for Automation and Control of the Next Generation of Nuclear Power Plants,' Nuclear Technology, Vol. 88, pp. 157-162 https://doi.org/10.13182/NT89-A34322
  10. KOPEC, 2002, 'Control Element Drive Mechanism Control System Design Specification,' pp. 24-64
  11. KEPCO, 1980, 'Control Rod Drive Mechanism Control System,' pp. 337-347