• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.137-149
• /
• 1999

For decades, many traffic flow studies on the analysis and determination of level of service (LOS) for the weaving sections have been made to Provide several regression equations. Weaving and non-weaving speeds were dependent variables for the equations, with independent variables being weaving length, number of lanes, and weaving ratios. One of the difficulties in developing the equations was that the weaving areas were rare in Korea, so the statistical analyses for calibrating the equation parameter could not be performed in a desirable manner. In this regard, a new and stochastic methodology for predicting the weaving and non-weaving speeds within the weaving sections was required. In this study the following design variables were developed; influence area of the weaving section. headway distribution within the weaving section, maximum weaving volume of the weaving section, length of the ideal weaving section, and speed estimations for the weaving and non-weaving flows. The evaluation of the new model was made comparing the delay in the weaving section with the one in the freeway basic section.

• Journal of the Korean Chemical Society
• /
• v.43 no.3
• /
• pp.251-256
• /
• 1999

Viscosities of toluene were experimentally determined by the falling-ball method at several temperatures and pressures to investigate the pressure and temperature dependence of the viscosity of toluene. With the shear stress of the viscous flow of toluene, the shear free energy, the shear entropy, and the shear enthalpy were defined to discuss the variations of the shear thermodynamic properties with pressure. The effect of temperature and pressure on the shear thermodynamic properties obtained experimentally can be explained by means of the molecular thermal agitation due to temperature incleasing and the steric effect of the closed molecules of to Iuene due to pressure elevation.

• Journal of Korean Society of Transportation
• /
• v.18 no.5
• /
• pp.33-42
• /
• 2000

This Paper is a Part of research Project series to analyze unique traffic characteristics observable within weaving sections on urban freeways. The research objectives were to establish with headway distribution and maximum Passing volume on weaving sections the basis of weaving designs that can promote safety and efficiency. Until now, when one wants to check the maximum Passing volume on weaving sections, it is taken for granted using headway distribution of freeway basic section. However. it was suspected in this research that for weaving sections different form of headway distribution had better be used. To prove this, field surveys were made to count headway intervals which supposedly were influenced not only by freeway basic section flows but also by weaving flows and later on used to develop headway distribution for weaving sections. For validation of the developed headway distribution, $x^2$-test was applied to three different data set of observed headways, currently used headway distribution for basic sections(Pearson Type III distribution) and new headway distribution. The result indicated new headway distribution as the most appropriate distribution form. Also, maximum passing volume within weaving sections was calculated based on new headway distribution and compared with Drew's maximum Passing volume.

• 한국ITS학회:학술대회논문집
• /
• v.2007 no.10
• /
• pp.105-110
• /
• 2007

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.57-66
• /
• 2007

Weaving is defined as the crossing of two or more traffic streams traveling in the same general direction along a significant length of highway without the aid of traffic control devices. Compared with other freeway sections, perturbation is easy to happen at weaving section. Because there are a lot of lane-changing maneuvers at the weaving section, traffic is subject to turbulence in excess of that normally presents on freeway basic section. This turbulence causes operational problems and its impact must be considered. The purpose of this paper is to perform a basic study on flow characteristics by lane, which can be achieved through analyzing breakdown phenomenon in the microscopic approach. The study made use of data derived from the aerial photography for the microscopic analysis. This research produced the 30-second interval data such as flows, speeds, and densities for the macroscopic analysis and derived the vehicular data to draw time-space diagram for the microscopic analysis. The paper analyzed the traffic characteristics using flows, speeds and densities variation and investigated the conditions of breakdown occurrence with the time-space diagrams. The breakdown phenomenon was identified at weaving section and the propagation from free flow to synchronized flow was observed in this study. In the future, the findings help develop the traffic operational algorithm to manage the traffic congestion under ubiquitous circumstance since the conditions of breakdown Phenomenon can be understood more.

• 도로교통
• /
• s.104
• /
• pp.40-51
• /
• 2006

• Proceedings of the KOR-KST Conference
• /
• 1995.06a
• /
• pp.97-131
• /
• 1995

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.1
• /
• pp.42-60
• /
• 2024

This study analyzed the characteristics of mixed traffic flows with autonomous vehicles on highway weaving sections and assessed the safety of vehicle-following pairs based on surrogate safety indicators. The intelligent driver model (IDM) was utilized to emulate the driving behavior of autonomous vehicles, and the weaving sections were divided into lengths of 300 and 600 meters for analysis within a micro-traffic simulation (VISSIM). Although significant differences were found in the average speed, density, and headway between the two sections through t-test results, no significant differences were observed when comparing the number of conflicts per indicator and the vehicle-following pair. Four safety indicators were selected for the mixed traffic evaluation based on their ability to represent risk levels similar to those perceived by drivers. The safety analysis, based on the selected four indicators, determined that autonomous vehicles following other autonomous vehicles were the safest pairing. Future research should focus on integrating these indicators into a single comprehensive index for analysis.

• Journal of Energy Engineering
• /
• v.15 no.1 s.45
• /
• pp.28-34
• /
• 2006

The convective heat transfer on the outer surface of tube arrays perpendicular to the flow direction was experimentally investigated. The test sections which include the aligned and staggered arrangements were made and the local heat transfer coefficients on the outer surface of the tube were measured after the Hour has been fully developed. The results showed that the local heat transfer coefficients of the staggered arrangement, which has transverse pitch of 0.075 m and longitudinal pitch of 0.08 m, were about 15% greater than that of the aligned arrangement. Also, the overall mom Nusselt number of the former was greater thu that of the latter.

• Proceedings of the KOR-KST Conference
• /
• 1999.10a
• /
• pp.303-308
• /
• 1999