Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Tip Clearance Effect on Through-Flow and Performance of a Centrifugal Compressor

  • Eum, Hark-Jin (Turbo System ＆ Control Laboratory, School of Mechanical and Aerospace engineering, Seoul National University) ;
  • Kang, Young-Seok (Turbo System ＆ Control Laboratory, School of Mechanical and Aerospace engineering, Seoul National University) ;
  • Kang, Shin-Hyoung (Turbo System ＆ Control Laboratory, School of Mechanical and Aerospace engineering, Seoul National University)
  • Published : 2004.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Numerical simulations have been performed to investigate tip clearance effect on through-flow and performance of a centrifugal compressor which has the same configuration of impeller with six different tip clearances. Secondary flow and loss distribution have been surveyed to understand the flow mechanism due to the tip clearance. Tip leakage flow strongly interacts with mainstream flow and considerably changes the secondary flow and the loss distribution inside the impeller passage. A method has been described to quantitatively estimate the tip clearance effect on the performance drop and the efficiency drop. The tip clearance has caused specific work reduction and additional entropy generation. The former, which is called inviscid loss, is independent of any internal loss and the latter, which is called viscous loss, is dependent on every loss in the flow passage. Two components equally affected the performance drop as the tip clearances were small, while the efficiency drop was influenced by the viscous component alone. The additional entropy generation was modeled with all the kinetic energy of the tip leakage flow. Therefore, the present paper can provide how to quantitatively estimate the tip clearance effect on the performance and efficiency.

Keywords

References

  1. Choi, C. H., 1999, 'Analysis of Steady and Unsteady Compressible Flows Using a Low Reynold Number ${\kappa}-{\omega}$ Turbulence Model,' Ph. D. Dissertation. Seoul National University, Korea
  2. Cumpsty, N. A., 1989, Compressor Aerodynamics, Longman Scientific & Technical
  3. Denton, J. D., 1993, 'Loss Mechanisms in Turbomachines,' Journal of Turbomachinery, Vol. 115, pp. 621-656 https://doi.org/10.1115/1.2929299
  4. Farge, T. Z., Johnson, M. W. and Maksoud, T. M. A., 1989, 'Tip Leakage in a Centrifugal Impeller,' Journal of Turbomachinery, Vol. 111, pp. 224-249
  5. Hah, C. A., 1986, 'A Numerical Modeling of Endwall and Tip-Clearance Flow of an Isolated Compressor Rotor,' Journal of Engineering for Gas Turbines and Power, Vol. 108, pp. 15-21 https://doi.org/10.1115/1.3239863
  6. Ishida, M., Ueki, H. and Senoo, Y., 1990, 'Effect of Blade Tip Configuration on Tip Clearance Loss of a Centrifugal Impeller,' Journal of Turbomachinery, Vol. 112, pp. 14-18 https://doi.org/10.1115/1.2927412
  7. Japikse, D. and Baines, N. C., 1994, Introduction to Turbomachinery, Concepts ETI, Inc. and Oxford University Press
  8. Koch, C. C. and Smith Jr., L. H., 1976, 'Loss Sources and Magnitudes in Axial-Flow Compressors,' Journal of Engineering for Power, July, pp. 411-424
  9. Lakshminarayana, B., 1970, 'Methods of Predicting the Tip Clearance Effects in Axial Flow Turbomachines,' Journal of Basic Engineering, Vol. 92, pp. 467-482 https://doi.org/10.1115/1.3425036
  10. Lakshminarayana, B., 1996, Fluid Dynamics and Heat Transfer of Turbomachinery, John Wiley & Sons, Inc.
  11. Larosiliere, L. M., Skoch, G. J. and Prahst, P. S., 1999, 'Tip Leakage in a Centrifugal Impeller Using Computational Fluid Dynamics and Measurements,' Journal of Propulsion and Power, Vol. 15, No. 5, pp. 623-632 https://doi.org/10.2514/2.5486
  12. Moore, J., Moore, J. G. and Timmis, P. H., 1984, 'Performance Evaluation of Centrifugal Compressor Impellers Using Three-Dimensional Viscous Flow Calculations,' Journal of Engineering for Gas Turbines and Power, Vol. 106, pp. 475-481 https://doi.org/10.1115/1.3239590
  13. Myong, H. K. and Yang, S. Y., 2003, 'Numerical Study on Flow Characteristics at Blade Passage and Tip Clearance in a Linear Cascade of High Performance Turbine Blade,' KSME International Journal, Vol. 17, No. 4, pp. 606-616 https://doi.org/10.1007/BF02984462
  14. Pampreen, R. C., 1973, 'Small Turbomachinery Compressor and Fan Aerodynamics,' Journal of Engineering for Power, July, pp. 251-256
  15. Rains, D. A., 1954, 'Tip Clearance Flows in Axial Flow Compressors and Pumps,' California Institute of Technology, Hydrodynamics and Mechanical Engineering Lab., Report No. 5
  16. Senoo, Y. and Ishida, M., 1986, 'Pressure Loss Due to the Tip Clearance of Impeller Blades in Centrifugal and Axial Blowers,' Journal of Engineering for Gas Turbines and Power, Vol. 108, pp. 32-37 https://doi.org/10.1115/1.3239882
  17. Sensoo, Y. and Ishida, M., 1987, 'Deterioration of Centrifugal Performance Due to Tip Clearance of Centrifugal Impellers,' Journal of Turbomachinery, Vol. 109, pp. 55-61 https://doi.org/10.1115/1.3262070
  18. Shum, Y. K. P., Tan, C. S. and Cumpsty, N. A., 2000, 'Impeller-Diffuser Interaction in Centrifugal Compressor,' Journal of Turbomachinery, Vol. 122, pp. 777-786 https://doi.org/10.1115/1.1308570
  19. Storer, J. A. and Cumpsty, N. A., 1991, 'Tip Leakage Flow Axial Compressor,' Journal of Turbomachinery, Vol. 113, pp. 252-259 https://doi.org/10.1115/1.2929095
  20. Whitifield, A. and Baines, N. C., 1990, Design of Radial Turbomachines, Longman Scientific & Technical