Abstract
This paper describes a systematic way of identifying the horizontal coefficient of consolidation of clayey soil by applying an optimization technique to the early part of dissipation data measured from the self-boring pressuremeter strain holding test. An analytical solution developed by Randolph & Wroth (1979) was implemented in normalized form to express the build-up of excess pore pressures as a function of the rigidity index and subsequent dissipation of excess pore pressures around a pressuremeter Horizontal coefficient of consolidation was determined by minimizing the differences between theoretical and measured excess pore pressure curves over 50% degree of dissipation range using optimization technique. The effectiveness of the proposed back-analysis method was examined against the real fled performances obtained from pressuremeter strain holding tests at Gimje and Yangsan site. It is shown that the proposed back-analysis method can evaluates the rational horizontal coefficient of consolidation, which is similar to those obtained from the piezocone dissipation test. Furthermore, proposed method can evaluate appropriate coefficient of consolidation for soil under partially drained condition.
본 논문에서는 자가굴착식 프레셔메터 시험의 변형을 유지시험(strain holding test)에서 관측된 소산시험 결과의 초기 소산경향으로부터 점성토 지반의 수평압밀계수를 추정하기 위한 최적화기법의 적용에 대하여 기술하였다. 프레셔메터의 확장으로 인한 초기 과잉간극수압의 분포는 Randolph. & Wroth(1979)의 해석적 해(analytical solution)를 이용하여 지반의 강성지수의 함수로 모사되었으며 연속된 간극수압 소산과정까지 전과정이 모사되었다. 제안된 기법에서는 이를 소산곡선과 정규화 된 관측 소산곡선이 초기 50% 범위에서 소산경향이 가장 일치하도록 하는 수평압밀계수를 최적화기법을 이용하여 결정하였다. 제안된 기법을 김제와 양산에서 수행된 기존의 자가굴착식 프레셔메터 연구결과의 해석에 적용하였으며 제안된 방법으로 얻어진 수평압밀계수를 기존의 연구결과, 실내 및 원위치 시험결과와 비교하였다. 연구결과 제안된 방법은 피에조콘 소산시험과 매우 일관성있게 일치하는 수평압밀계수를 제공할 뿐 아니라 부분배수가 발생하는 지점에서도 간극수압 소산경향을 반영함으로 인해 보다 적절한 수평압밀계수를 결정할 수 있음을 알았다.