Journal of Mechanical Science and Technology

  • 제18권2호
  • /
  • Pages.230-239
  • /
  • 2004
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Evaluation of Thermal Deformation Model for BGA Packages Using Moire Interferometry

  • Joo, Jinwon (School of Mechanical Engineering, Chungbuk National University) ;
  • Cho, Seungmin (Department of Mechanical Engineering, University of Maryland)
  • 발행 : 2004.02.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A compact model approach of a network of spring elements for elastic loading is presented for the thermal deformation analysis of BGA package assembly. High-sensitivity moire interferometry is applied to evaluate and calibrated the model quantitatively. Two ball grid array (BGA) package assemblies are employed for moire experiments. For a package assembly with a small global bending, the spring model can predict the boundary conditions of the critical solder ball excellently well. For a package assembly with a large global bending, however, the relative displacements determined by spring model agree well with that by experiment after accounting for the rigid-body rotation. The shear strain results of the FEM with the input from the calibrated compact spring model agree reasonably well with the experimental data. The results imply that the combined approach of the compact spring model and the local FE analysis is an effective way to predict strains and stresses and to determine solder damage of the critical solder ball.

키워드

참고문헌

  1. Cho, S. M., Cho, S. Y. and Han, B., 2002, 'Observing Real-time Thermal Deformations in Electronic Packaging,' Experimental Techniques, Vol. 26, No. 3, pp. 25-29 https://doi.org/10.1111/j.1747-1567.2002.tb00065.x
  2. Corbin, J. S, 1993, 'Finite Element Analysis for Solder Ball Connect (SBC) Structural design Optimization,' IBM J. Research Development, Vol. 37, No. 5, pp. 585-596 https://doi.org/10.1147/rd.375.0585
  3. Darveaux, R. and Mawer, A, 1995, 'Thermal and Power Cycle Limit of Plastic ball grid array (PBGA) assemblies,' Proc. Surface Mount Int. Conf., San Jose, CA, pp. 315-326
  4. Guo, Y., Post, D. and Han, B., 1992, 'Thick Composites in Compression : An Experimental Study of Micro-mechanical Behavior and Smeared Engineering Properties,' J. Composite Material, Vol. 26, No. 13, pp. 1930-1944
  5. Guo, Y., Lim, C. K., Chen, W. T. and Woychik, C. G., 1993, 'Solder Ball Connect (SBC) Assemblies Under Thermal Loading : I. Deformation Measurement via Moire Interferometry, and Its Interpretation,' IBM J. Research Development, Vol. 37, No. 5, pp. 635-648 https://doi.org/10.1147/rd.375.0635
  6. Han, B. and Guo, Y., 1995, 'Thermal Deformation Analysis of Various Electronics Packaging Products by Moire and Microscopic Moire Interferometry,' J. Electronic Packaging, Trans. ASME, Vol. 117, pp. 185-191 https://doi.org/10.1115/1.2792090
  7. Han, B., 1998, 'Recent Advancements of Moire and Microscopic Moire Interferometry for Thermal Deformation Analysis of Microelectrics Devices,' Experimental Mechanics, Vol. 38, No. 4, pp. 278-288
  8. Joo, J. W., Chai, S. E. and Shin, D. I., 2002a, 'Deformation Analysis of Composite-Patched Concrete Using Moire Interferometry,' Transactions of the KSME, A, Vol. 26, No. 1, pp. 160-170 https://doi.org/10.3795/KSME-A.2002.26.1.160
  9. Joo, J. and Han, B., 2002b, 'Thermo-mechanical and Flexural Analysis of WB-PBGA Package Using Moire Interferometry,' Transactions of the KSME, A, Vol. 26, No. 7, pp. 1302-1308 https://doi.org/10.3795/KSME-A.2002.26.7.1302
  10. Jung, W., Lau, J. H. and Pao, Y. H., 1996, 'Nonlinear Analysis of Full-matrix and Perimeter Plastic Ball Grid Array Solder Joints,' Proc. 1996 ASME International Mechanical Engineering congress & Exhibition, Atlanta, GA, pp. 1-19
  11. Lee, T., Lee, J. and Jung, I., 1998, 'Finite Element Analysis for Solder Ball Failures in Chip Scale Packages,' Microelectronics and Reliability, Vol. 38, No. 12, pp. 1941-1947 https://doi.org/10.1016/S0026-2714(98)00163-2
  12. Post, D., Han, B. and Ifju, P., 1994, High Sensitivity Moire : Experiental Analysis for Mechanics and Materials, Springer-Verlag, New York
  13. Zhao, J. -H., Dai, X. and Ho, P. S., 1998, 'Analysis and Modeling Verification for Thermal-mechanical Deformation in Flip-Chip Packages,' Proc. 48th Electronic Components and Technology Conference, Seattle, WA, May, 1998, pp. 336-344 https://doi.org/10.1109/ECTC.1998.678716