Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Design of Elastomeric Bearing System and Analysis of it Mechanical Properties

  • Moon, Byung-Young (Department of Aerospace Engineering, Pusan National University) ;
  • Kang, Gyung-Ju (Department of Aerospace Engineering, Pusan National University) ;
  • Kang, Beom-Soo (Department of Aerospace Engineering, Pusan National University) ;
  • Cho, Dae-Seung (Department of Naval Architecture and Ocean Engineering, Pusan National University)
  • Published : 2004.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper proposes a new type of bearing system. In this study, a method for design of on elastomeric bearing system and its mechanical property analysis are carried. Experimental and theoretical studies of the elastomeric bearings with fiber reinforcement were proved effective new lightweight bearing system. The fibers in the bearings for isolation are assumed to be flexible in extension, in contrast to the steel plates in the conventional bearing system. Several kinds of bearing systems in the form of long strips are designed, fabricated and tested. The results suggest that it is possible to produce the economical and effective fiber-reinforced elastomeric bearing that matches the behavior of a steel-reinforced bearing. Feasibility and advantages of the proposed bearings are illustrated by the application of the analytic procedure to the structure system. Results obtained here are reported to be an efficient approach with respect to bearing system and design of bearing against shock absorbing system when compared with other conventional one.

Keywords

References

  1. Int. Conf. of Building Officials, 1997, Earthquake regulations for seismic isolated structures, Uniform Building Code, Appendix Chapter 16, Whittier, CA
  2. Kelly, J. M., 2000, 'Analysis for Fiber-Reinforced Elastomeric Isolators,' Annual Report to Engineering Research Center for Net-Shape and Die Manufacturing Pusan National University Korea
  3. Kelly, J. M., 1999, 'Analysis of Fiber-Reinforced Elastomeric Isolators,' JSEE, Vol. 2, No. 1, pp. 19-34
  4. Kelly, J. M., 2002, 'Analytical and Experimental Study on Fiber-Reinforced Strip Isolators,' Report to Dongil Rubber Belt company LTD, p. 20
  5. Koo, G. H. and Ohtori, Y., 1998, 'Loading Rate of High Damping Seismic Isolation Rubber Bearing on Earthquake Responses,' KSME Int. J., Vol. 12, No. 1, pp. 58-66 https://doi.org/10.1007/BF02946534
  6. Koo, G. H., Lee, J. H., Lee, H. Y. and Yoo, B., 1999, 'Stability of Laminated Rubber Bearing and Its Application to Seismic Isolation,' KSME Int. J., Vol. 13, No. 8, pp. 595-604 https://doi.org/10.1007/BF03184553
  7. Moon, B. Y., Kang, G. J., Kang, B. S. and Kim, K. S., 2002, 'An Experimental Study on Fiber Reinforced Elastomeric Bearing,' Earthquake Engineering Society of Korea, Vol. 6, No. 1, pp. 1-6 https://doi.org/10.5000/EESK.2002.6.1.001
  8. Moon, B. Y., Kang, G. J., Kang, B. S. and Kim, K. S., 2002, 'Design and Experimental Analysis of Fiber Reinforced Elastomeric Isolator,' Transactions of the KSME. A., Vol. 26, No. 10, pp. 2026-2033 https://doi.org/10.3795/KSME-A.2002.26.10.2026
  9. Tsai, H. C. and Lee, C. C., 1998, 'Compressive Stiffness of Elastic Layers Bonded Between Rigid Plates,' International Journal of Solids and Structures, Vol. 35, pp. 3053-3069 https://doi.org/10.1016/S0020-7683(97)00355-7
  10. Tsai, H. C. and Lee, C. C., 1998, 'Tilting Stiffness of Elastic Layers Bonded Between Rigid Plates,' International Journal of Solids and Structures, Vol. 36, pp. 2485-2505 https://doi.org/10.1016/S0020-7683(98)00119-X