초록
교정 및/또는 시험기관은 국제상호인증협정 (Global Mutual Recognition Arrangement)에 따라 ISO 17025[1]의 경영요건 및 기술요건의 제반 조건 또는 이와 동등한 조건을 충족시켜야 한다. ISO 17025의 기술요건을 기술한 제 5장, 제 5.10.4 절은 교정성적서 (Calibration Certificate)에 대한 요구사항을 제시하고 있는데, 이들 중 하나가 측정 불확도 (Uncertainty of Measurement)를 교정성적서에 명시하여야 하는 것이다. 본 논문에서는 표준 마이크로폰의 가역교정에 따른 제반 불확도 요인을 측정 또는 계산하여 표준 마이크로폰의 교정에 대한 측정 불확도를 계산하였다. 중간 주파수 영역에서 1인치 및 1/2 인치 마이크로폰의 경우 확장불확도는 0.03 dB 였으며 20 Hz에서는 각각 0.10 dB과 0.11 dB, 고주파에서는 각각 0.07 dB와 0.08 dB까지 증가한다.
According to the Mutual Recognition Arrangement (MRA), the calibration and/or test laboratories should satisfy the management and technical requirements ISO 17025 or equivalent. Chapter 5, Section 5.10.4 of the technical requirement of ISO 17025 suggests the required informations for calibration certificates, one of them is to state the uncertainty of measurement. The uncertainties of measurement in reciprocity calibration of standard laboratory microphone were calculated. The expanded uncertainties for 1 and 1/2 inch microphones were 0.03 dB in the middle frequency range and they increased up to 0.10 dB and 0.11 dB at 20 Hz, 0.07 dB and 0.08 dB at high frequency, respectively.