대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제27권9호
  • /
  • Pages.1597-1606
  • /
  • 2003
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

가공오차 및 조립오차가 유성기어열의 정특성에 미치는 영향

Influence of Manufacturing and Assembly Errors on The Static Characteristics of Epicyclic Gear Trains

  • 오재국 (원광대학교 대학원 기계공학부) ;
  • 천길정 (원광대학교 기계공학부)
  • 발행 : 2003.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Static analysis using hybrid finite element(FE) method has been applied to characterize the influence of position, runout and thickness errors of the sun, ring and planet on the bearing forces and critical tooth stress. Some guidelines for tolerance control to manage critical stress and bearing forces are deduced from the results. Carrier indexing error planet assembly and planet tooth thickness error are most critical to reduce planet bearing force and maximize load sharing as well as to reduce critical stresses. Sun and carrier bearing forces due to errors increase several times more than those of normal condition.

키워드

참고문헌

  1. Youn In-Seong, Cheon Gill-Jeong, 2003, 'Dynamic Characteristics of an Epicyclic Gear Train Considering Coriolis Effect,' Transactions of the KSME, A, Vol. 27, No.4, pp. 491-498 https://doi.org/10.3795/KSME-A.2003.27.4.491
  2. Cheon G. J., Lee D. H., Ryu H. T., Kim J. H., Han D. C., 1999, 'A Study on the Dynamic Characteristics of an Epicyclic Gear Train with Journal Bearing,' SAE 1999-01-1052
  3. Ryu Hyoung-Tae, Lee Dong-Hwan, Cheon GillJeong, 1998, 'An Experimental Study on the Dynamic Characteristics of Epicyclic Gear Train Supported with Journal Bearing,' Transactions of the KSME, A, Vol. 22, No.8, pp. 1566-1576
  4. Lee Dong-Hwan, Youn In-Seong, Cheon Gill-Jeong, 2000, 'A Study on the Vibrational Characteristics of a Foot Mount Type Gearbox for Epicyclic Gear Train,' Transactions of the KSME, A, Vol. 24, No. 10, pp. 2619-2627
  5. Lin J., Parker R. G., 2000, 'Structured Vibration Characteristics of Planetary Gears with Unequally Spaced Planets,' J. of Sound and Vibration, 233(5), pp. 921-928 https://doi.org/10.1006/jsvi.1999.2581
  6. Saada A., Velex P., 1995, 'An Extended Model for the Analysis of the Dynamic Behavior of Planetary Trains,' ASME J of Mechanical Design, Vol. 117, pp. 241-247 https://doi.org/10.1115/1.2826129
  7. Velex P., Flamand L., 1996, 'Dynamic Response of Planetary Trains to Mesh Parametric Excitations,' ASME J of Mechanical Design, Vol. 118, pp. 7-14 https://doi.org/10.1115/1.2826860
  8. Bodas, A., Kahraman, A, 2001, 'Influence of Carrier and Gear Manufacturing Errors on the static Planet Load Sharing Behavior of Planetary Gear Sets,' Proc. JSME Int. Conf. on Motion and Power Transmissions, MPT2001-Fukuoka, pp. 633-638
  9. James, B., Harris, O., 2002, 'Predicting Unequal Planetary Load Sharing Due to Manufacturing Errors and System Deflections, With Validation Against Test Data,' SAE 2002-01-0699
  10. Townsend, D. P., 1991, 'Dudley's Gear Handbook,' McGraw Hill
  11. Kahraman, A., 1994, 'Planetary Gear Train Dynamics,' ASME J. of Mechanical Design, Vol. 116, pp.713-720 https://doi.org/10.1115/1.2919441
  12. Lin J., Parker R. G, 1999, 'Analytical Characterization of the Unique Properties of Planetary Gear Free Vibration,' ASME J. of Vibration and Acoustics, Vol. 121, pp. 316-321 https://doi.org/10.1115/1.2893982
  13. Vijayakar, S., 1991, 'A Combined Surface Integral and Finite Element Solution for a Three-Dimensional Contact Problem,' Int. J. of Numerical Methods Eng., Vol. 31, pp. 525-545 https://doi.org/10.1002/nme.1620310308
  14. Parker, R. G, Agashe, v., Vijayakar, S., 2000, 'Dynamic Response of a Planetary Gear System using a Finite Element/Contact Mechanics Model, ' ASME J. of Mechanical Design, Vol. 122, pp. 304-310 https://doi.org/10.1115/1.1286189
  15. Parker, R. G., Vijayakar, S., Imajo, T., 2000, 'NonLinear Dynamic Response of a Spur Gear Pair: Modelling and Experimental Comparisons,' J. of Sound and Vibration, 237(3), pp. 435-455 https://doi.org/10.1006/jsvi.2000.3067
  16. Kahraman, A, Vijayakar, S., 2001, 'Effect of Internal Gear Flexibility on the Quasi-Static Behavior of a Planetary Gear Set,' ASME J. of Mechanical Design, Vol. 123, pp. 408-415 https://doi.org/10.1115/1.1371477

피인용 문헌

  1. Analysis of Compliance of Planetary Gears based on Floating Intermediate Rings vol.29, pp.6, 2013, https://doi.org/10.9725/kstle.2013.29.6.378
  2. Influence of Flexible Pin for Planets on Service Life of Wind Turbine Gearboxes vol.36, pp.9, 2012, https://doi.org/10.3795/KSME-A.2012.36.9.953
  3. Effects of Non-torque Loads and Carrier Pinhole Position Errors on Planet Load Sharing of Wind Turbine Gearbox pp.2198-0810, 2019, https://doi.org/10.1007/s40684-019-00059-8