Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)
- Volume 7 Issue 4
- /
- Pages.91-97
- /
- 2003
- /
- 2234-6937(pISSN)
- /
- 2287-6979(eISSN)
A Study on the ALFD Design of Rolled Beams
압연형교의 ALFD설계에 관한 연구
- Received : 2003.02.19
- Published : 2003.10.31
Abstract
The maximum moment may occur at interior supports of continuous bridges. If the bigger moment is applied on them, a local yielding at interior supports may occur. They may show plastic behaviors, and the moment will be redistributed. The strength design, L.F.D., redistributes 10% of the negative moment which is obtained from the elastic analysis. However, A.L.F.D method computes the moment which is redistributed. This moment is called automoment. The moment-rotation curve is needed to find automoment. In this paper moment-rotation curve for compact sections suggested from AASHTO Guide Specifications is used to find automoment. Based on A.L.F.D. limit states specification method, a three-span continuous bridge is designed.
연속교의 내측지점에는 최대모멘트가 발생한다. 보다큰 모멘트가 작용하면 내측지점에 국부적 항복이 발생할 수 있고 소성거동을 하면서 모멘트를 재분배 시킨다. 강도설계법인 LFD방법은 탄성해석으로부터 구한 부모멘트의 10%를 막연히 재분배 시켜주고 있다. 그러나 ALFD방법은 내측지점에서 국부항복에 의하여 발생되는 모멘트를 계산하여 설계에 반영하도록 하고있다. 이러한 국부항복에 의하여 발생되는 모멘트를 자생 모멘트라 한다. 자생모멘트를 구하기 위해서는 모멘트-비탄성회전각곡선이 필요하다. 본 논문에서는 조밀단면에서 AASHTO 지침시방서에서 제시한 모멘트-비탄성회전곡선을 아용하여 자생모멘트를 구하였다. 또한 ALFD 한계상태 규준을 적용하여 3경간 연속합성교를 설계하였다.
Keywords