DOI QR코드

DOI QR Code

A Macro Parametric Data Representation far CAD Model Exchange using XML

CAD 모델 교환을 위한 매크로 파라메트릭 정보의 XML 표현

  • 양정삼 (㈜부품대비 기술연구소) ;
  • 한순흥 (한국과학기술원 기계공학과) ;
  • 김병철 (한국과학기술원 기계공학과) ;
  • 박찬국 (고등기술연구원 정보기술센터)
  • Published : 2003.12.01

Abstract

The macro-parametric approach, which is a method of CAD model exchange, has recently been proposed. CAD models can be exchanged in the form of a macro file, which is a sequence of modeling commands. As an event-driven commands set, the standard macro file can transfer design intents such as parameters, features and constraints. Moreover it is suitable for the network environment because the standard macro commands are open, explicit, and the data size is small. This paper introduces the concept of the macro-parametric method and proposes its representation using XML technology. Representing the macro-parametric data using XML allows managing vast amount of dynamic contents, Web-enabled distributed applications, and inherent characteristic of structure and validation.

Keywords

References

  1. Crabb, H.C., 1998, The Virtual Engineer, 21st Century Product Development, SME/ASME Press, New York
  2. Gregory, T., 1999, Interoperability Cost Analysis of the U.S. Automotive Supply Chain-Final report, RTI Project Number 7007-03, Research Triangle Institute
  3. Mun, D.H. and Han, S., 2001, 'Exchange of CAD Models Using Macro Parametric Approach (in Korean),' Transactions of the Society of CAD/CAM Engineers, Vol. 6, No. 4, pp. 254-262
  4. Mun, D., Kim, B. and Han, S., 2002, 'A Hybrid Parametric Translator Using the Feature tree and the Macro File(in Korean),' Transactions of the Society of CAD/CAM Engineers, Vol. 7, No. 4, pp. 240-247
  5. Choi, K.H., Mun, D.H., Han, S., 2002, 'Exchange of CAD Part Models Based on the Macroparametric Approach,' International Journal of CAD/CAM(www.ijcc.org), Vol.2(2), pp.23-31
  6. Kim, B.C., 2002, 'Verification of the Standard Modeling Commands Set by Developing a Geometric Modeler (in Korean),' 'Master's thesis, Korea Advanced Institute of Sci. and Tech
  7. Pratt, M.J., 1998, 'Extension of the Standard ISO10303(STEP) for the Exchange of Parametric and Variational CAD Models,' PROLAMAT98
  8. Anderson, B., 1998, 'ENGEN Data Model: a Neutral Model to Capture Design lntent,' PROLAMAT98
  9. Barra, R. and Anderson, B., 2000, 'Draft Implementor's Guide Solid Model Construction History,' DRAFT Minutes of WG12 Parametrics Meeting - October 2000
  10. Kerer, C., Kirda, E. and Kruegel, C., 2002, 'XGuide-A Practical Guide to XML-Based Web Engineering,' LNCS2376, pp. 104-117
  11. Rezayat, M., 2002, 'Knowledge-based Product Development Using XML and KCs,' Computer Aided Design, Vol. 32, pp. 299-309 https://doi.org/10.1016/S0010-4485(00)00013-0
  12. Nambiar, U., lacroix, Z., Bressan, S., Lee, M.L. and Li, Y., 2002, 'Current Approaches to XML Management,' IEEE Internet computing July-August https://doi.org/10.1109/MIC.2002.1020325
  13. ISO/WD 10303-28e2, ISO TC184/SC4/WG11 N202, 2002, Product Data Representation and Exchange: Implementation Methods: XML Schema Governed Representation of EXPRESS Schema Governed Data, http://www.tc184-sc4.org/SC4_Open/SC4_and_Working_Groups/WG11/
  14. Kim, J. and Han, S., 2002, 'Manipulating Geometry Instances in an STEP-based OODB from commercial CAD systems (in Korean),' Journal of the Korean Institute of Industrial Engineers, Vol. 28, No. 4, pp. 436-443
  15. Kim, J., Han, S. and Kim, Y., 2003, 'An Evaluation of Access Performance of STEP-Based CAD Database(in Korean),' Conference Proceeding of Society of Naval Archilects of Korea, Feb., 2003, Hanjin Heavy Industry
  16. Mun, D., Han, S. and Oh, Y.C., 2003, 'A Set of Standard Modeling Commands for the History-Based Parametric Approach,' Computer Aided Design, Vol. 35, pp. 1171-1179 https://doi.org/10.1016/S0010-4485(03)00022-8
  17. Jang, S.-H. and Kim, C.-W., 2001, 'An Intelligent CAD System for Development of Controllers of Active Magnetic Bearings,' KSME International Journal, Vol. 15, No. 8, pp. 1108-1118
  18. KSME International Journal v.15 no.8 An Intelligent CAD System for Development of Controllers of Active Magnetic Bearings Jang,S.H.;Kim,C.W.

Cited by

  1. Development of Procedural 2D CAD Data Translator Supporting ISO 10303 STEP vol.37, pp.5, 2013, https://doi.org/10.3795/KSME-A.2013.37.5.693
  2. A 3D Parametric CAD System for Smart Devices vol.19, pp.2, 2014, https://doi.org/10.7315/CADCAM.2014.191