Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Local Buckling Collapse Behavior of an Aluminum Square Tube Beam under a Bending Load

굽힘하중을 받는 알루미늄 사각관 보의 국부적 좌굴붕괴 거동에 관한 연구

  • 이성혁 (한양대학교 대학원 기계설계학과) ;
  • 최낙삼 (한양대학교 기계공학과)
  • Published : 2003.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

To analyze the bending collapse behavior of an aluminum square tube beam under a bending load, a finite element simulation for the four-point bending test has been performed. Using an aluminum tube beam specimen partly inserted with two steel bars, the local buckling deformation near the center of the tube beam was induced. The maximum bending load and the bending collapse behavior obtained from the numerical simulation were in good agreement with experimental results. Using a combination of the four-point bending test and its finite element simulation, analysis of the local buckling and the accompanied bending collapse behavior of aluminum tube beam could be quantitative accomplished.

Keywords

References

  1. Hayduk, Robert, J., Wierzbicki, T., 1984, 'Extensional Collapse Modes of Structural Members,' Computers and Structures, Vol. 18, No. 3, pp. 447-458 https://doi.org/10.1016/0045-7949(84)90065-8
  2. Kang, S. Y. and Han, D. C., 1993, 'A Study on the Axial Crush Analysis of a Rectangular Tube with Experimental Comparison,' Transactions of the KSME, A, Vol. 17, No. 10, pp. 2555-2562
  3. Kim, C. W. and Han, B. K., 1994, 'Collapse of Thin-Walled Hatted Section Tubes,' Transactions of the KSAE, Vol. 2, No. 1, pp. 65-72
  4. Kim, Y. Y. and Han, C. W., 1995, 'Elastic Buckling Analysis of Single Hat Rectangular Tubes,' Transactions of the KSME, A, Vol. 19, No. 5, pp. 1251-1258
  5. Kim, C. W., Han, B. K., Won, J. J. and Lim, C. H., 1996, 'The Energy Absorption Characteristics of Thin-walled Rectangular Tubes,' Transactions of the KSAE, Vol. 4, No. 3, pp. 83-91
  6. Langseth, M., Hopperstad, O. S., and Hanssen, A. G., 1998, 'Crash Behaviour of Thin-Walled Aluminium Members,' Thin-Walled Structures, Vol. 32, pp. 127-150 https://doi.org/10.1016/S0263-8231(98)00030-5
  7. Kim, H. S., 2002, 'New Extruded Multi-Cell Aluminum Profile for Maximum Crash Energy Absorption and Weight Efficiency,' Thin-Walled Structures, Vol. 40, pp. 311-327 https://doi.org/10.1016/S0263-8231(01)00069-6
  8. Kecman, D., 1979, 'Bending Collapse of Rectangular Section Tubes in Relation to the Bus Roll-Over Problems, PH.D. Thesis. Cranfield Institute of Technology, U.K.
  9. Kyriakides, S. and Shaw, P. K., 1987, 'Inelastic Buckling of Tubes under Cyclic Bending,' J. Pressure Vessel Technology, Vol. 109, pp. 169-178 https://doi.org/10.1115/1.3264891
  10. Corona, E. and Vaze, S. P., 1996, 'Buckling of Elastic-Plastic Square Tubes under Bending,' Int. J. Mech. Sci., Vol. 38, No. 7, pp. 753-775 https://doi.org/10.1016/0020-7403(95)00081-X
  11. Wierzbicki, T., Abramowicz, W., Gholami, T., Huang, J., 1994, 'Stress Profiles in Thin-Walled Prismatic Columns Subjected to Crush Loading-II Bending,' Computer & Structure, Vol. 51, No. 6, pp. 625-641 https://doi.org/10.1016/S0045-7949(05)80002-1
  12. Kang, S. Y., Chang, I. B. and Kim, H. Y., 1998, 'Development of a Pure Bending Test Machine and Bending Collapse Characteristics of Rectanqular Tubes,' Transactions of the KSME, A, Vol. 6, No. 1, pp. 223-233
  13. Cimpoeru, S. J. and Murray, N. W., 1993, 'The Large Deflection Pure Bending Properties of a Square Thin-Walled Tube,' Int. J. Mech. Sci., Vol. 35, No. 3-4 https://doi.org/10.1016/0020-7403(93)90079-A
  14. Abramowicz, W., 1983, 'Simplified Crushing Analysis of Thin Walled Columns and Beams,' Engineering Trans., Vol. 29, pp. 3-27
  15. Kim, T. H. and Reid, S. R., 2001, 'Bending Collapse of Thin-Walled Rectangular Section Columns,' Computers and Structures, Vol. 79, pp. 1897-1911 https://doi.org/10.1016/S0045-7949(01)00089-X