Browse > Article
http://dx.doi.org/10.3795/KSME-A.2003.27.12.2011

A Study on the Local Buckling Collapse Behavior of an Aluminum Square Tube Beam under a Bending Load  

Lee, Sung-Hyuk (한양대학교 대학원 기계설계학과)
Choi, Nak-Sam (한양대학교 기계공학과)
Publication Information
Transactions of the Korean Society of Mechanical Engineers A / v.27, no.12, 2003 , pp. 2011-2018 More about this Journal
Abstract
To analyze the bending collapse behavior of an aluminum square tube beam under a bending load, a finite element simulation for the four-point bending test has been performed. Using an aluminum tube beam specimen partly inserted with two steel bars, the local buckling deformation near the center of the tube beam was induced. The maximum bending load and the bending collapse behavior obtained from the numerical simulation were in good agreement with experimental results. Using a combination of the four-point bending test and its finite element simulation, analysis of the local buckling and the accompanied bending collapse behavior of aluminum tube beam could be quantitative accomplished.
Keywords
Bending Collapse; Al Square Tube; Local Buckling; Plastic Hinge; Numeical Analysis;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Kang, S. Y., Chang, I. B. and Kim, H. Y., 1998, 'Development of a Pure Bending Test Machine and Bending Collapse Characteristics of Rectanqular Tubes,' Transactions of the KSME, A, Vol. 6, No. 1, pp. 223-233   과학기술학회마을
2 Cimpoeru, S. J. and Murray, N. W., 1993, 'The Large Deflection Pure Bending Properties of a Square Thin-Walled Tube,' Int. J. Mech. Sci., Vol. 35, No. 3-4   DOI   ScienceOn
3 Hayduk, Robert, J., Wierzbicki, T., 1984, 'Extensional Collapse Modes of Structural Members,' Computers and Structures, Vol. 18, No. 3, pp. 447-458   DOI   ScienceOn
4 Langseth, M., Hopperstad, O. S., and Hanssen, A. G., 1998, 'Crash Behaviour of Thin-Walled Aluminium Members,' Thin-Walled Structures, Vol. 32, pp. 127-150   DOI   ScienceOn
5 Abramowicz, W., 1983, 'Simplified Crushing Analysis of Thin Walled Columns and Beams,' Engineering Trans., Vol. 29, pp. 3-27
6 Kang, S. Y. and Han, D. C., 1993, 'A Study on the Axial Crush Analysis of a Rectangular Tube with Experimental Comparison,' Transactions of the KSME, A, Vol. 17, No. 10, pp. 2555-2562   과학기술학회마을
7 Kim, C. W. and Han, B. K., 1994, 'Collapse of Thin-Walled Hatted Section Tubes,' Transactions of the KSAE, Vol. 2, No. 1, pp. 65-72
8 Kim, T. H. and Reid, S. R., 2001, 'Bending Collapse of Thin-Walled Rectangular Section Columns,' Computers and Structures, Vol. 79, pp. 1897-1911   DOI   ScienceOn
9 Kim, C. W., Han, B. K., Won, J. J. and Lim, C. H., 1996, 'The Energy Absorption Characteristics of Thin-walled Rectangular Tubes,' Transactions of the KSAE, Vol. 4, No. 3, pp. 83-91   과학기술학회마을
10 Kim, Y. Y. and Han, C. W., 1995, 'Elastic Buckling Analysis of Single Hat Rectangular Tubes,' Transactions of the KSME, A, Vol. 19, No. 5, pp. 1251-1258   과학기술학회마을
11 Wierzbicki, T., Abramowicz, W., Gholami, T., Huang, J., 1994, 'Stress Profiles in Thin-Walled Prismatic Columns Subjected to Crush Loading-II Bending,' Computer & Structure, Vol. 51, No. 6, pp. 625-641   DOI   ScienceOn
12 Kim, H. S., 2002, 'New Extruded Multi-Cell Aluminum Profile for Maximum Crash Energy Absorption and Weight Efficiency,' Thin-Walled Structures, Vol. 40, pp. 311-327   DOI   ScienceOn
13 Kecman, D., 1979, 'Bending Collapse of Rectangular Section Tubes in Relation to the Bus Roll-Over Problems, PH.D. Thesis. Cranfield Institute of Technology, U.K.
14 Corona, E. and Vaze, S. P., 1996, 'Buckling of Elastic-Plastic Square Tubes under Bending,' Int. J. Mech. Sci., Vol. 38, No. 7, pp. 753-775   DOI   ScienceOn
15 Kyriakides, S. and Shaw, P. K., 1987, 'Inelastic Buckling of Tubes under Cyclic Bending,' J. Pressure Vessel Technology, Vol. 109, pp. 169-178   DOI