설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제15권10호
  • /
  • Pages.835-842
  • /
  • 2003
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지

2차 공기 주입방식에 따른 스토커형 소각로의 연소특성에 관한 수치해석적 연구

A Numerical Study on the Combustion Characteristics for Stoker Type Incinerator with Various Injection Type of Secondary Air

  • 정진 (경희대학교 기계공학과) ;
  • 김창녕 (경희대학교 테크노공학대학) ;
  • 조영민 (경희대학교 환경.응용화학대학)
  • Jung, Jin (Department of Mechanical Engineering, Kyunghee University) ;
  • Kim, Chang-Nyeong (College of Advanced Technology, Kyunghee University) ;
  • Cho, Young-Min (College of Environment and Applied Chemistry, Kyunghee University)
  • 발행 : 2003.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A three dimensional numerical analysis has been conducted for a stoker type incinerator which has the capacity of 1.5 ton/hr. The objective of the present study is to predict the effects of swirl induced by secondary air and to find an optimal operating condition of the incinerator. In this study, combustion characteristics such as distributions of temperature, velocity and concentration of each species have been examined with various injection types of secondary air and with different flow rates of secondary air in the incinerator. It is found that the secondary air injection on the combustion process makes the path of fluid particle longer in the combustor and enhances the mixing between air and combustion gas by arousing a swirl. Therefore, the injection type of secondary air can be an important key in the design process of incinerator.

키워드

참고문헌

  1. J. Korea Solid Wastes Engineering Society v.16 no.4 Numerical analysis of the stoker incineration process for the municipal solid waste Ohm,T.I.;Jang,D.S.
  2. J. Korea Solid Wastes Engineering Society v.17 no.8 Numerical simulation of waste combustion from the result of experiment of 50 ton/day MSW incinerator Park,B.S.;Yun,Y.S.;Seo,J.D.;Lee,J.W.
  3. Trans. of KSME(B) v.22 no.5 The study on the combustion model and combustion characteristics for stoker type incinerator Kim,H.Y.;Chun,C.K.;Hwang,H.Y.
  4. J. Korean Solid Wastes Engineering Society v.18 no.2 Combined bed combustion and gas flow simulation for the MSW incinerator Ryu,C.K.;Shin,D.H.;Choi,S.M.
  5. J. Korea Solid Wastes Engineering Society v.17 no.4 Numerical analysis for effect of swirl on the combustion characteristics and residence time in the pyrolysis gas combustor Lee,J.W.;Kim,S.C.;Yang,J.M.
  6. J. Korea Solid Wastes Engineering Society v.17 no.1 A case study; Improvement of operating conditions in a 200 t/day MSW incinerator Choi,J.H.;Ryu,C.K.;Shin,D.H.;Choi,S.M.