Abstract
In this paper, high purity RF sputter-type ion source for non-mass separated ion beam deposition was evaluated. The fundamental characteristics of the ion source which is composed of an RF Cu coil and a high purity Cu target (99.9999 %) was studied, and the practical application of Cu thin films for ULSI metallization was discussed. The relationship between the DC target current and the DC target voltage at various RF power and Ar gas pressures was measured, and then preparation conditions for Cu thin films was described. As a result, it was found that the deposition conditions of the target voltage, the target current and the Ar pressure were optimized at -300 V, 240 W and 9 Pa, respectively. The resistivity of Cu films deposited at a bias voltage of -50 V showed a minimum value of 1.8 $\pm$ 0.1 $mu\Omega$cm, which is close to that of Cu bulk (1.67 $mu\Omega$cm).
본 논문은 비질량분리형 이온빔증착법에 이용하기 위한 고순도의 고주파 스퍼터타입 이온소스에 대한 특성을 평가했다. 고주파 구리 코일과 고순도 (99.9999 %)의 구리 타겟으로 이루어진 이온소스에 대한 기본적인 특성과 ULSI금속배선용 구리 박막으로의 응용가능성에 대해서 고찰하였다. 구리 타겟에 걸어주는 전압에 따른 구리 타겟에 흐르는 전류 특성을 고주파 전원 또는 아르곤 가스 압력을 변화시키면서 특성을 평가한 후 구리박막제작을 위한 조건에 대해서 고찰하였다. 박막 증착을 위한 기본적인 조건으로써, 타겟의 전압 -300 V와 고주파 전원 240 W, 그리고 아르곤 압력 9 Pa이 정해졌으며, 이 같은 조건에서 기판 바이어스 -50 V에서 증착된 구리 박막의 비저항값은 1.8 $\pm$ 0.1 $mu\Omega$cm로 이는 구리 벌크의 저항값(1.67 $\pm$ 0.1 $\mu\Omega$cm)에 근접한 값임을 알 수 있었다.